EN 61347-1-2015 en Lamp controlgear - Part 1 General and safety requirements.pdf

1、BSI Standards PublicationLamp controlgearPart 1: General and safety requirementsBS EN 61347-1:2015National forewordThis British Standard is the UK implementation of EN 61347-1:2015. It isidentical to IEC 61347-1:2015. It supersedes BS EN 61347-1:2008+A2:2013,which will be withdrawn on 26 March 2018.

2、The UK participation in its preparation was entrusted by TechnicalCommittee CPL/34, Lamps and Related Equipment, to SubcommitteeCPL/34/3, Auxiliaries for lamps.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to includ

3、e all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 76479 0ICS 29.140.99Compliance with a British Standard cannot confer immunity fromlegal obligations.This Britis

4、h Standard was published under the authority of theStandards Policy and Strategy Committee on 30 June 2015.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61347-1:2015EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 61347-1 May 2015 ICS 29.140.99 Supersedes EN

5、61347-1:2008 English Version Lamp controlgear - Part 1: General and safety requirements(IEC 61347-1:2015) Appareillages de lampes - Partie 1: Exigences gnrales et exigences de scurit (IEC 61347-1:2015) Gerte fr Lampen - Teil 1: Allgemeine undSicherheitsanforderungen (IEC 61347-1:2015) This European

6、Standard was approved by CENELEC on 2015-03-26. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references conc

7、erning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CENELEC me

8、mber into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republ

9、ic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization

10、 Comit Europen de Normalisation ElectrotechniqueEuropisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61347-1:2015 E EN

11、 61347-1:2015 - 2 - Foreword The text of document 34C/1118/FDIS, future edition 3 of IEC 61347-1, prepared by SC 34C, “Auxiliaries for lamps“, of IEC TC 34, “Lamps and related equipment“, was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61347-1:2015. The following dates a

12、re fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2015-12-26 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-03-26 This document supers

13、edes EN 61347-1:2008 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC

14、by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). Endorsement not

15、ice The text of the International Standard IEC 61347-1:2015 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60038 NOTE Harmonized as EN 60038. IEC 60155:1993 NOTE

16、 Harmonized as EN 60155:1995. IEC 60364-4-44 NOTE Harmonized as HD 60364-4-444. IEC 60598 (Series) NOTE Harmonized as EN 60598 (Series). IEC 60664-3 NOTE Harmonized as EN 60664-3. IEC 60925:1989 NOTE Harmonized as EN 60925:1991. IEC 60925:1989/AMD1:1996 NOTE Harmonized as EN 60925:1991/A1:1996. IEC

17、60925:1989/AMD2:2001 NOTE Harmonized as EN 60925:1991/A2:2001. IEC 60927:2007 NOTE Harmonized as EN 60927:2007. IEC 60927:2007/AMD1:2013 NOTE Harmonized as EN 60927:2007/A1:2013. BS EN 61347-1:2015- 3 - EN 61347-1:2015 IEC 60929:2006 NOTE Harmonized as EN 60929:2006. IEC 60950-1 NOTE Harmonized as E

18、N 60950-1. IEC 60990:1999 NOTE Harmonized as EN 60990:1999. IEC 61047:2004 NOTE Harmonized as EN 61047:2004. IEC 61347-2-1:2000 NOTE Harmonized as EN 61347-2-1:2001. IEC 61347-2-1:2000/AMD1:2005 NOTE Harmonized as EN 61347-2-1:2001/A1:2006. IEC 61347-2-2:2011 NOTE Harmonized as EN 61347-2-2:2012. IE

19、C 62384 NOTE Harmonized as EN 62384. BS EN 61347-1:2015EN 61347-1:2015 - 4 - Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indisp

20、ensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the rel

21、evant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60065 (mod) 2001 Audio, video and similar electronic apparatus - Safety requirements EN 60065 2002 - - +co

22、rrigendum Mar. 2006 - - +corrigendum Aug. 2007 - - +A11 2008 - - +A12 2011 IEC 60068-2-14 2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature EN 60068-2-14 2009 IEC 60081 - Double-capped fluorescent lamps - Performance specifications EN 60081 - IEC 60085 2007 Electrical ins

23、ulation - Thermal evaluation and designation EN 60085 2008 IEC 60112 2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials EN 60112 2003 +A1 2009 +A1 2009 IEC 60216 series Electrical insulating materials - Thermal endurance properties - Par

24、t 1: Ageing procedures and evaluation of test results EN 60216 series IEC 60317-0-1 2013 Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire EN 60317-0-1 2014 IEC 60384-14 - Fixed capacitors for use in electronic equipment - Part 14: Se

25、ctional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains EN 60384-14 - IEC 60417 - Graphical symbols for use on equipment. Index, survey and compilation of the single sheets. HD 243 S12 - - - +corrigendum Oct. - +A1 1979 - - IEC 60449 1

26、973 Voltage bands for electrical installations of buildings HD 193 S2 1982 IEC 60529 1989 Degrees of protection provided by enclosures (IP Code) EN 60529 1991 - - +corrigendum May 1993 +A1 1999 +A1 2000 +A2 2013 +A2 2013 IEC 60598-1 (mod) 2014 Luminaires - Part 1: General requirements and tests EN 6

27、0598-1 2015 BS EN 61347-1:2015- 5 - EN 61347-1:2015 IEC 60598-2 series Luminaires - Part 2: Particular requirements - Section 1: Fixed general purpose luminaires EN 60598-2 series IEC 60664-1 2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and

28、 tests EN 60664-1 2007 IEC 60664-4 2005 Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress EN 60664-4 2006 - - +corrigendum Oct. 2006 IEC 60691 2002 Thermal-links - Requirements and application guide EN 60691 2003 IEC 60695-2-10

29、- Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure EN 60695-2-10 - IEC 60695-11-5 - Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance EN 60695-11-5 - IEC

30、60730-2-3 - Automatic electrical controls for household and similar use - Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps EN 60730-2-3 - IEC 60884-2-4 - Plugs and socket-outlets for household and similar purposes - Part 2-4: Particular requirements

31、 for plugs and socket-outlets for SELV - - IEC 60901 - Single-capped fluorescent lamps - Performance specifications EN 60901 - IEC 60906-3 - IEC System of plugs and socket-outlets for household and similar purposes - Part 3: SELV plugs and socket-outlets, 16 A 6V, 12 V, 24 V, 48 V, a.c. and d.c. - -

32、 IEC 60921 2004 Ballasts for tubular fluorescent lamps - Performance requirements EN 60921 2004 +A1 2006 +A1 2006 IEC 60923 2005 Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements EN 60923 2005 IEC 60950-1 - Information technology eq

33、uipment - Safety - Part 1: General requirements EN 60950-1 - - - +A11 - - - +A12 - - - +AC - IEC 61180-1 1992 High-voltage test techniques for low-voltage equipment - Part 1: Definitions, test and procedure requirements EN 61180-1 1994 IEC 61189-2 2006 Test methods for electrical materials, printed

34、boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures EN 61189-2 2006 IEC 61249-2 series Materials for printed boards and other interconnecting structures - Part 2-1: Reinforced base materials, clad and unclad - Phenolic cellul

35、ose paper reinforced laminated sheets, economic grade, copper-clad EN 61249-2 series IEC 61347-2 series Lamp controlgear - Part 2-1: Particular requirements for starting devices (other than glow starters) EN 61347-2 series - - +corrigendum Jul. - - - +corrigendum Dec. - BS EN 61347-1:2015EN 61347-1:

36、2015 - 6 - IEC 61347-2-8 - Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps EN 61347-2-8 - - - +corrigendum Jul. - - - +corrigendum Dec. - IEC 61347-2-9 2012 Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamp

37、s (excluding fluorescent lamps) EN 61347-2-9 2013 IEC 61558-1 2005 Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests EN 61558-1 2005 - - +corrigendum Aug. 2006 IEC 61558-2-6 2009 Safety of transformers, reactors, power supply units a

38、nd similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers EN 61558-2-6 2009 IEC 61558-2-16 2009 Safety of transformers, reactors, power supply units and simi

39、lar products for voltages up to 1 100 V - Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units EN 61558-2-16 2009 ISO 4046-4 2002 Paper, board, pulps and related terms - Vocabulary - Part 4: Paper and board grades and con

40、verted products - - BS EN 61347-1:2015 2 IEC 61347-1:2015 IEC 2015 CONTENTS FOREWORD . 9 INTRODUCTION . 11 1 Scope 12 2 Normative references 12 3 Terms and definitions 14 4 General requirements 22 5 General notes on tests 22 6 Classification . 23 7 Marking . 24 7.1 Items to be marked . 24 7.2 Durabi

41、lity and legibility of marking. 26 8 Terminals 26 9 Earthing . 26 9.1 Provisions for protective earthing (Symbol: IEC 60417-5019 (2006-08) 26 9.2 Provisions for functional earthing (Symbol: IEC 60417-5018 (2011-07) 27 9.3 Lamp controlgear with conductors for protective earthing by tracks on printed

42、circuit boards 27 9.4 Earthing of built-in lamp controlgear 27 9.5 Earthing via independent controlgear 27 9.5.1 Earth connection to other equipment . 27 9.5.2 Earthing of the lamp compartments powered via the independent lamp controlgear 28 10 Protection against accidental contact with live parts 2

43、8 11 Moisture resistance and insulation . 29 12 Electric strength 30 13 Thermal endurance test for windings of ballasts 31 14 Fault conditions . 35 15 Construction 39 15.1 Wood, cotton, silk, paper and similar fibrous material . 39 15.2 Printed circuits 39 15.3 Plugs and socket-outlets used in SELV

44、or ELV circuits . 39 15.4 Insulation between circuits and accessible parts . 39 15.4.1 General . 39 15.4.2 SELV circuits . 40 15.4.3 FELV circuits . 40 15.4.4 Other circuits . 41 15.4.5 Insulation between circuits and accessible conductive parts 41 16 Creepage distances and clearances 43 16.1 Genera

45、l . 43 16.2 Creepage distances 45 16.2.1 General . 45 16.2.2 Minimum creepage distances for working voltages 46 16.2.3 Creepage distances for working voltages with frequencies above 30 kHz . 46 16.2.4 Compliance with the required creepage distances . 47 BS EN 61347-1:2015IEC 61347-1:2015 IEC 2015 3

46、16.3 Clearances . 48 16.3.1 General . 48 16.3.2 Clearances for working voltages 49 16.3.3 Clearances for ignition voltages and working voltages with higher frequencies 50 16.3.4 Compliance with the required clearances . 52 17 Screws, current-carrying parts and connections . 53 18 Resistance to heat,

47、 fire and tracking 53 19 Resistance to corrosion . 54 20 No-load output voltage 54 Annex A (normative) Test to establish whether a conductive part is a live part which may cause an electric shock . 55 A.1 General test requirements . 55 A.2 Limits for measured voltages 55 A.3 Limits for touch current

48、 . 55 Annex B (normative) Particular requirements for thermally protected lamp controlgear . 56 B.1 Introductory remark . 56 B.2 General . 56 B.3 Terms and definitions 56 B.4 General requirements for thermally protected lamp controlgear. 57 B.5 General notes on tests 57 B.6 Classification 57 B.6.1 G

49、eneral . 57 B.6.2 According to the class of protection . 57 B.6.3 According to the type of protection 57 B.7 Marking . 58 B.8 Thermal endurance of windings 58 B.9 Lamp controlgear heating . 58 B.9.1 Preselection test 58 B.9.2 “Class P“ thermally protected lamp controlgear . 59 B.9.3 Temperature declared thermally protected lamp controlgear as specified in IEC 61347-2-8, with a rated maximum case temperature of 130 C or lower . 60 B.9.4 Temperature declared thermally prot