EN 61400-25-1-2017 en Wind energy generation systems - Part 25-1 Communications for monitoring and control of wind power plants - Overall description of principles and models.pdf

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Wind energy generation systemsPart 25-1: Communications for monitoring and control of wind power plants Overall description of principles and modelsBS EN 61400-25-1:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM

2、EN 61400-25-1 December 2017 ICS 27.180 Supersedes EN 61400-25-1:2007 English Version Wind energy generation systems - Part 25-1: Communications for monitoring and control of wind power plants - Overall description of principles and models (IEC 61400-25-1:2017) Systmes de gnration dnergie olienne - P

3、artie 25-1: Communications pour la surveillance et la commande des centrales oliennes - Description globale des principes et des modles (IEC 61400-25-1:2017) Windenergieanlagen - Teil 25-1: Kommunikation fr die berwachung und Steuerung von Windenergieanlagen - Einfhrende Beschreibung der Prinzipien

4、und Modelle (IEC 61400-25-1:2017) This European Standard was approved by CENELEC on 2017-08-24. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-

5、to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by tr

6、anslation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic

7、 Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingd

8、om. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reser

9、ved worldwide for CENELEC Members. Ref. No. EN 61400-25-1:2017 E National forewordThis British Standard is the UK implementation of EN 61400251:2017. It is identical to IEC 61400251:2017. It supersedes BS EN 61400251:2007, which is withdrawn.The UK participation in its preparation was entrusted to T

10、echnical Committee PEL/88, Wind turbines.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards

11、 Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 95206 7ICS 27.180Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2017.Amendme

12、nts/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61400251:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61400-25-1 December 2017 ICS 27.180 Supersedes EN 61400-25-1:2007 English Version Wind energy generation systems - Part 25-1: Communications for monitoring

13、 and control of wind power plants - Overall description of principles and models (IEC 61400-25-1:2017) Systmes de gnration dnergie olienne - Partie 25-1: Communications pour la surveillance et la commande des centrales oliennes - Description globale des principes et des modles (IEC 61400-25-1:2017)

14、Windenergieanlagen - Teil 25-1: Kommunikation fr die berwachung und Steuerung von Windenergieanlagen - Einfhrende Beschreibung der Prinzipien und Modelle (IEC 61400-25-1:2017) This European Standard was approved by CENELEC on 2017-08-24. CENELEC members are bound to comply with the CEN/CENELEC Inter

15、nal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any

16、CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the offi

17、cial versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,

18、Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung C

19、EN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61400-25-1:2017 E BS EN 61400251:2017EN 61400-25-1:2017 2 European foreword The text of document 88/587/CDV, fu

20、ture edition 2 of IEC 61400-25-1, prepared by IEC/TC 88 “Wind energy generation systems“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61400-25-1:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publicati

21、on of an identical national standard or by endorsement (dop) 2018-06-01 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-12-01 This document supersedes EN 61400-25-1:2007. Attention is drawn to the possibility that some of the elements of this

22、 document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61400-25-1:2017 was approved by CENELEC as a European Standard without any modification. In the official v

23、ersion, for Bibliography, the following note has to be added for the standard indicated: IEC 61850 Series NOTE Harmonized as EN 61850 Series. BS EN 61400251:2017EN 61400-25-1:2017 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications

24、 The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) appli

25、es. NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD

26、 Year IEC 61400-25 Series Wind turbines - Part 25: Communications for monitoring and control of wind power plants EN 61400-25 Series IEC 61400-25-2 2015 Wind turbines - Part 25-2: Communications for monitoring and control of wind power plants - Information models EN 61400-25-2 2015 IEC 61400-25-3 20

27、15 Wind turbines - Part 25-3: Communications for monitoring and control of wind power plants - Information exchange models EN 61400-25-3 2015 IEC 61400-25-4 - Wind energy generation systems - Part 25-4: Communications for monitoring and control of wind power plants - Mapping to communication profile

28、 EN 61400-25-4 - IEC 61400-25-6 - Wind energy generation systems - Part 25-6: Communications for monitoring and control of wind power plants - Logical node classes and data classes for condition monitoring EN 61400-25-6 - IEC 61850-7-1 2011 Communication networks and systems for power utility automa

29、tion - Part 7-1: Basic communication structure - Principles and models EN 61850-7-1 2011 IEC 61850-7-2 2010 Communication networks and systems for power utility automation - Part 7-2: Basic information and communication structure - Abstract communication service interface (ACSI) EN 61850-7-2 2010 BS

30、 EN 61400251:2017This page deliberately left blank 2 IEC 61400-25-1:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 7 1 Scope 9 2 Normative references 10 3 Terms and definitions 11 4 Abbreviated terms . 15 5 Overall description of IEC 61400-25 (all parts). 16 5.1 General . 16 5.2 Top-down view on

31、 wind power plants 16 5.2.1 Definition of wind power plants 16 5.2.2 Wind power plant components . 16 5.3 Generic requirements on communication 18 5.3.1 Communication capability 18 5.3.2 Communication content . 18 5.3.3 Communication functions . 19 5.4 Communication model of IEC 61400-25 (all parts)

32、 20 5.4.1 General . 20 5.4.2 Information model 20 5.4.3 Information exchange model and relation to wind power plant information models 22 5.4.4 Mapping to communication profile 23 6 Wind power plant information model 23 6.1 General . 23 6.2 Information modelling methodology . 23 6.2.1 Wind power pla

33、nt information . 23 6.2.2 Modelling approach . 24 6.2.3 Logical devices 26 6.2.4 Logical nodes 26 7 Wind power plant information exchange model 27 7.1 General . 27 7.2 Information exchange modelling methodology . 27 7.2.1 Wind power plant information exchange . 27 7.2.2 Service models 28 7.2.3 Abstr

34、act communication service interface 29 7.2.4 Service modelling convention 31 8 Mapping to communication protocols . 34 8.1 General . 34 8.2 Architecture of the mappings. 34 8.3 Mapping of the wind power plant information model 35 Bibliography 36 Figure 1 Conceptual communication model of the IEC 614

35、00-25 series 10 Figure 2 Data processing by the server (conceptual) 21 Figure 3 Modelling approach (conceptual) 22 Figure 4 Structure of wind power plant information model 25 2 IEC 61400-25-1:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 7 1 Scope 9 2 Normative references 10 3 Terms and definit

36、ions 11 4 Abbreviated terms . 15 5 Overall description of IEC 61400-25 (all parts). 16 5.1 General . 16 5.2 Top-down view on wind power plants 16 5.2.1 Definition of wind power plants 16 5.2.2 Wind power plant components . 16 5.3 Generic requirements on communication 18 5.3.1 Communication capabilit

37、y 18 5.3.2 Communication content . 18 5.3.3 Communication functions . 19 5.4 Communication model of IEC 61400-25 (all parts) 20 5.4.1 General . 20 5.4.2 Information model 20 5.4.3 Information exchange model and relation to wind power plant information models 22 5.4.4 Mapping to communication profile

38、 23 6 Wind power plant information model 23 6.1 General . 23 6.2 Information modelling methodology . 23 6.2.1 Wind power plant information . 23 6.2.2 Modelling approach . 24 6.2.3 Logical devices 26 6.2.4 Logical nodes 26 7 Wind power plant information exchange model 27 7.1 General . 27 7.2 Informat

39、ion exchange modelling methodology . 27 7.2.1 Wind power plant information exchange . 27 7.2.2 Service models 28 7.2.3 Abstract communication service interface 29 7.2.4 Service modelling convention 31 8 Mapping to communication protocols . 34 8.1 General . 34 8.2 Architecture of the mappings. 34 8.3

40、 Mapping of the wind power plant information model 35 Bibliography 36 Figure 1 Conceptual communication model of the IEC 61400-25 series 10 Figure 2 Data processing by the server (conceptual) 21 Figure 3 Modelling approach (conceptual) 22 Figure 4 Structure of wind power plant information model 25 B

41、S EN 61400251:2017IEC 61400-25-1:2017 IEC 2017 3 Figure 5 Role of common data classes (CDC) in WPP information model 25 Figure 6 Client and server role . 28 Figure 7 IEM service models 28 Figure 8 Conceptual information exchange model for a wind power plant 30 Figure 9 IEM service model with example

42、s . 32 Figure 10 Sequence diagram . 33 Figure 11 ACSI mapping to communication stacks/profiles . 34 Figure 12 Communication profiles 35 Table 1 Operational functions 19 Table 2 Management functions 20 Table 3 Wind power plant information categories . 24 Table 4 General table structure of a logical n

43、ode (LN) . 26 Table 5 Data class attributes in a logical node . 27 Table 6 Service table . 32 BS EN 61400251:2017 4 IEC 61400-25-1:2017 IEC 2017 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ WIND ENERGY GENERATION SYSTEMS Part 25-1: Communications for monitoring and control of wind power plants Overal

44、l description of principles and models FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all ques

45、tions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication

46、s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC coll

47、aborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion

48、on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensur

49、e that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding nati