EN 61466-1-2016 en Composite string insulator units for overhead lines with a nominal voltage greater than 1000 V - Part 1 Standard strength classes and end fittings.pdf

1、Composite string insulator units for overhead lines with a nominal voltage greater that 1 000 V Part 1: Standard strength classes and end fittingsBS EN 61466-1:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implem

2、entation of EN 61466-1:2016. It isidentical to IEC 61466-1:2016. It supersedes BS EN 61466-1:1997 which iswithdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee PEL/36, Insulators for power systems.A list of organizations represented on this committee can be obtained o

3、nrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 87293 8 ICS 29.080.10Compliance with a Bri

4、tish Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 August 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61466-1:2016EUROPEAN STANDARD NORME

5、 EUROPENNE EUROPISCHE NORM EN 61466-1 July 2016 ICS 29.080.10; 29.240.20 Supersedes EN 61466-1:1997 English Version Composite string insulator units for overhead lines with a nominal voltage greater than 1000 V - Part 1: Standard strength classes and end fittings (IEC 61466-1:2016) lments de chane d

6、isolateurs composites pour lignes ariennes de tension nominale suprieure 1 000 V - Partie 1: Classes mcaniques et armatures dextrmit normalises (IEC 61466-1:2016) Verbund-Kettenisolatoren fr Freileitungen mit einer Nennspannung ber 1000 V - Teil 1: Genormte Festigkeitsklassen und Endarmaturen (IEC 6

7、1466-1:2016) This European Standard was approved by CENELEC on 2016-06-22. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bib

8、liographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the r

9、esponsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, F

10、inland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for El

11、ectrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members

12、. Ref. No. EN 61466-1:2016 E BS EN 61466-1:2016EN 61466-1:2016 2 European foreword The text of document 36/378/FDIS, future edition 2 of IEC 61466-1, prepared by IEC/TC 36 “Insulators“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61466-1:2016. The following dates are

13、fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-03-22 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-06-22 This document supersede

14、s EN 61466-1:1997. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61466

15、-1:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated : IEC 61109:2008 NOTE Harmonized as EN 61109:2008. BS EN 61466-1:2016EN 61466-1:2016 3 Annex ZA (normative) Normat

16、ive references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated reference

17、s, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards list

18、ed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60120 1984 Dimensions of ball and socket couplings of string insulator units HD 474 S1 1986 IEC 60471 1977 Dimensions of clevis and tongue couplings of string insulator units - - BS EN 61466-1:2016 2 IEC 61466-

19、1:2016 IEC 2016 CONTENTS FOREWORD 4 1 Scope .6 2 Normative references 6 3 Mechanical and dimensional characteristics .6 4 Plan of the standard 7 5 Insulator designation .7 6 Marking .7 7 Composite insulator units 7 Annex A (normative) Ball and socket couplings, N series .9 A.1 General 9 A.2 Dimensio

20、ns .9 A.3 Constructional features of the gauges .9 A.4 Plan of the annex 9 A.5 Designation 9 A.6 Gauges for ball couplings 10 A.7 NOT GO and GO Gauges for socket couplings 14 Annex B (normative) Clevis and tongue couplings, N series . 16 B.1 General 16 B.2 Dimensions . 16 B.3 Plan of the annex 16 B.

21、4 Designation 16 Annex C (normative) Y-clevis couplings . 18 C.1 General 18 C.2 Dimensions . 18 C.3 Plan of the annex 18 C.4 Designation 18 Annex D (normative) Eye couplings . 20 D.1 General 20 D.2 Dimensions . 20 D.3 Plan of the annex 20 D.4 Designation 20 Bibliography . 22 Figure 1 Designation let

22、ters of couplings 8 Figure A.1 Dimensions of NOT GO gauges for ball couplings . 10 Figure A.2 Dimensions of GO gauges for ball couplings . 10 Figure A.3 Dimensions of GO and NOT GO gauges for ball couplings . 11 Figure A.4 Dimensions of NOT GO gauges for ball couplings . 12 Figure A.5 Dimensions of

23、gauges for ball coupling size 16N and 18N 13 Figure A.6 Dimensions of gauge for ball coupling size 22N 13 Figure A.7 Dimensions of NOT GO and GO gauges for socket couplings 14 Figure B.1 Dimensions of clevis and tongue couplings . 17 Figure C.1 Dimensions of Y-clevis gauges . 18 BS EN 61466-1:2016IE

24、C 61466-1:2016 IEC 2016 3 Figure C.2 Dimensions of Y-clevis couplings and gauges . 19 Figure D.1 Dimensions of eye couplings . 21 Table 1 Insulator designation .8 Table A.1 Dimensions of NOT GO gauges for ball couplings . 10 Table A.2 Dimensions of GO gauges for ball couplings . 11 Table A.3 Dimensi

25、ons of GO and NOT GO gauges for ball couplings 11 Table A.4 Dimensions of NOT GO gauges for ball couplings . 12 Table A.5 Dimensions of gauges for ball couplings . 13 Table A.6 Dimensions of NOT GO and GO gauges for socket couplings . 15 Table B.1 Dimensions of clevis and tongue couplings . 17 Table

26、 C.1 Dimensions of Y-clevis couplings . 19 Table D.1 Dimensions of eye couplings 21 BS EN 61466-1:2016 4 IEC 61466-1:2016 IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ COMPOSITE STRING INSULATOR UNITS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE GREATER THAN 1 000 V Part 1: Standard strength cla

27、sses and end fittings FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning

28、standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their prep

29、aration is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

30、with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant s

31、ubjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the techni

32、cal content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum exten

33、t possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide c

34、onformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its d

35、irectors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses ari

36、sing out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is

37、 drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61466-1 has been prepared by IEC technical committee 36: Insulators. This secon

38、d edition cancels and replaces the first edition published in 1997. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) Addition of strength classes reflecting UHV practice; b) Inclusion of Corrigen

39、dum 1:2008 for Y fitting hole dimensions. BS EN 61466-1:2016IEC 61466-1:2016 IEC 2016 5 The text of this standard is based on the following documents: FDIS Report on voting 36/378/FDIS 36/381/RVD Full information on the voting for the approval of this standard can be found in the report on voting in

40、dicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 61466 series, published under the general title Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V, can be foun

41、d on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdraw

42、n, replaced by a revised edition, or amended. BS EN 61466-1:2016 6 IEC 61466-1:2016 IEC 2016 COMPOSITE STRING INSULATOR UNITS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE GREATER THAN 1 000 V Part 1: Standard strength classes and end fittings 1 Scope This part of IEC 61466 is applicable to composite st

43、ring insulator units for a.c. overhead lines with a nominal voltage greater than 1 000 V and a frequency not greater than 100 Hz. It also applies to insulators of similar design used in substations or on electric traction lines. This standard applies to string insulator units of composite type with

44、ball, socket, tongue, clevis, Y-clevis or eye couplings, or a combination thereof. The object of this standard is to prescribe specified values for the mechanical characteristics of the composite string insulator units and define the main dimensions of the couplings to be used on the composite strin

45、g insulator units in order to permit the assembly of insulators or fittings supplied by different manufacturers and to allow, whenever practical, interchangeability with existing installations. It also defines a standard designation system for composite string insulator units. NOTE 1 General definit

46、ions and methods of testing are given in IEC 61109. NOTE 2 Only the dimensions necessary for assembly of the couplings are dealt with in this International Standard. Properties of material and working loads are not specified. The coordination of dimensions of the end-fittings with the strength class

47、es is specified in Clause 7. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced

48、document (including any amendments) applies. IEC 60120:1984, Dimensions of ball and socket couplings of string insulator units IEC 60471:1977, Dimensions of clevis and tongue couplings of string insulator units 3 Mechanical and dimensional characteristics Composite string insulator units are standar

49、dized by the following specified characteristics: specified mechanical load (SML); standard couplings. All dimensions are expressed in millimetres. The dimensions apply to the finished product after any surface treatment. BS EN 61466-1:2016IEC 61466-1:2016 IEC 2016 7 4 Plan of the standard This standard includes eleven standard SML classes designated for use together with 10 different series of couplings as follows. Two different standard seri