EN 61702-1999 en Rating of Direct Coupled Photovoltaic (PV) Pumping Systems《直接耦合光伏水泵系统的额定值 IEC 61702 1995》.pdf

1、STD-BSI BS EN bL702-ENGL 2000 Lb24bb7 0847185 877 = BRITISH STANDARD Rating of direct coupled photovoltaic (PV) pumping systems The European Standard EN 61702:1999 has the status of a British Standard ICs 27.160 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS EN 6 1702:2000

2、 iEC 61702:1995 STD-BSI BS EN b1702-ENGL 2000 1b2qbb7 OBqLBb 703 BS EN 61702:2000 National foreword This British Standard is the official English language version of EN 617021999. It is identical with lEC 61702 1995. The UK participation in its preparation was entrusted to Technical Committee GEIJ82

3、, Solar photovoltaic energy systems, which has the responsibility to: - aid enquirers to undeistand the text; - present to the responsible European committee any enquiries on the - monitor related international and European developments and promulgate interpretation, or proposals for change, and kee

4、p the UK interests informed them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For instance, IEC 27-1 has been renumbered as IEC 60027-1. For a per

5、iod of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative references to international publications w

6、ith their corresponding European publications. The British Standards which implement these international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “intemational Standards Correspondence Index“, or by using the “Find“

7、facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include ail the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal ob

8、ligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 5 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. This British Standard, having been prepared under the direction

9、 of the Electrotechnical Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 June 2000 Amendments issued since publication O BSI 06-2000 I I ISBN O 680 34311 1 STD*BSI BS EN bL702-ENGL 2000 9 Lb24bb9 OBi9187 biT EUROPEAN STANDARD NORME EUROPENNE

10、 EUROPISCHE NORM EN 61702 September 1999 ICs 27.160 English version Rating of direct coupled photovoltaic (PV) pumping systems (IEC 61 702: 1995) Evaluation des systmes photovoltaques de pompage couplage direct (CE1 61 702: 1 995) Bemessungsdaten direktgekuppelter photovoltaischer (PV) - Pumpensyste

11、me (IEC 61702:1995) This European Standard was approved by CENELEC on 1999-08-01. CENELEC members are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists a

12、nd bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the respo

13、nsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Ita

14、ly, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B -

15、1050 Brussels 1999 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61702:1999 E STD-BSI BS EN bL702-ENGL 2000 lb24bb9 0849388 58b 9 Page 2 EN 61702:1999 Foreword The text of the International Standard IEC 61 702:1995, prepared by

16、IEC TC 82, Solar photovoltaic energy systems, was submitted to the formal vote and was approved by CENELEC as EN 61 702 on 1999-08-01 without any modification. The following dates were fixed: - latest date by which the EN has to be implemented at national level by publication of an identical nationa

17、l standard or by endorsement (dop) 2000-08-01 - latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2002-08-01 Endorsement notice The text of the International Standard IEC 61 702:1995 was approved by CENELEC as a European Standard without any modification.

18、 STD BSI BS EN bL7DZ-ENGL ZDDD Lb24bb OB49287 422 Page 3 EN 6 1702: 1999 RATING OF DIRECT COUPLED PHOTOVOLTAIC (PV) PUMPING SYSTEMS 1 Scope This International Standard defines predicted short-term characteristics (instantaneous and for a typical daily period) of direct coupled photovoltaic (PV) wate

19、r pumping systems. It also defines minimum actual performance values to be obtained on-site. It does riot address PV pumping systems with batteries. The parameters defining the photovoltaic power generating system (PVPGS) and the standard days, used to provide data in figure 1, should be in accordan

20、ce with IEC standards, in preparation, on the reference solar day. 2 Short term predlcted characteristlcs 2.1 The cuwes shown in figure 1 and figure 2 shall be given, and shall take Into account the following parameters: - Hi (kWh - m-2 . day“): mean daily in-plane total irradiation. See values 4, 6

21、, and 7 kWh - m-2 - day- given in figure 1 ; - Hb (kWh.m“* - day-): mean daily in-plane total irradiation during the reference period; Daiiy and instantaneous predicted de/V8ry curves - Gi (W - m-*): in-plane total irradiance. Values are given in figure 2 for 250 W - m-2, 500 W . m-2, 800 W - m-2, 1

22、 O00 W - m-2, and the higher value Git of Gi. for which the instantaneous delivery, qo, is equal to zero; - Gio (W - m-2): in-plane reference total irradiance; - Mmt, (m): total manometric head. Values are given in figures 1 and figure 2 for 0,75 Mmt, 1.15 Mmt, and 1.3 Mmt,; - Tamd (OC): on-site mea

23、n daylight ambient temperature for the reference period or estimated ambient temperature for an 800 W mm2 otal in-plane irradiance for a day with an in-plane total irradiation of 6 kWh - m-2 - day . NOTE - As long as there is no IEC standard for the reference rolar day, daily irradiation and a tempe

24、rature profile murt be presented beside the predicted daily delivery curves in figure 1. 2.2 Temperature corrections Reference instantaneous Q, and daily delivery Qlo values shall be given for the two following sets of values: - Mmt, Hi, Tamd +lo “ci - Mmt, Hi, Tamd -10 OC. STD-BSI BS EN bL702-ENGL

25、2000 lbZLibb9 Oq9390 L3q Page 4 EN 61702:1999 3 On-site tests 3.1 Conditions to be verified during on site tests 0.75 Mmt, actual Mmt 1.3 Mmt, Tamd -10 OC actual Tamd Tamd +10 OC 0.8 Hi, actual Hi 1.2 H, 0,8 Gio actual Gi 1.2 Gio 3.2 Procedures (under consideration) 4 Performance requlrements 4.1 In

26、stantaneous delivery, 9 The actual measured delivery, extrapolated to reference conditions, shall be higher than 90 % of the predicted reference delivery. Between the Gi0/2 and Gio , values of on-site total in plane irradiance, instantaneous actual measured deliveries shall be higher than 90 % of pr

27、edicted instantaneous deliveries for measured irradiances, ambient temperature, and total manometric head. 4.2 Daily delivery, Qj The actual measured daily delivery, corrected to reference conditions, shall be greater than K% of the predicted daily delivery, where K is greater than 80. STD*BSI BS EN

28、 bL702-ENGL 2000 Lb24bb9 0849191 O70 Page 6 EN 61702:1999 Oi(m 3 . ILC IUIn Figure 1 - Daily delivery versus dally in-plane total Irradiation “I Figure 2 - instantaneous delivery versus In-plane total irradiance STD=BSI BS EN bL702-ENGL 2000 lb24bb9 0849392 Tu7 = BS EN 61 702:2OOO IEC 61702:1995 BSI

29、 389 Chiswick High Road London w4 4AL BSI - British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards

30、are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this

31、 British standard would inform the Secretary of the technid committee responsible, the identity of which can be found on the inside front cover. Tek 020 8996 9OOO. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive t

32、he latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation

33、 of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on nationa, European and international standards through its Library and its Technical Help to Exportem Service. Various BSI electronic informalion s

34、ervices are also adable which give details on all its products and services. Contact the Informalion Centre. Tel: 020 8996 71 11. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For d

35、etails of these and other benefits contact Membership Administsati on. Tel 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the Publications of the intedonal standarcbation bodies. Except as permitted under the Copyn

36、ght, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means - electronic, photocopying, recording or otherwise - without prior written permission from BSI. This does not preclude the free use, in the com of implementing the

37、standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. if permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.