EN 61753-053-2-2014 en Fibre optic interconnecting devices and passive components - Performance standard - Part 053-2 Non-connectorized singlemode fibre electrically controlled var.pdf

1、BSI Standards PublicationFibre optic interconnecting devices and passive components Performance standardPart 053-2: Non-connectorized single-mode fibre, electrically controlled, variable optical attenuator for category C Controlled environmentsBS EN 61753-053-2:2014National forewordThis British Stan

2、dard is the UK implementation of EN 61753-053-2:2014. Itis identical to IEC 61753-053-2:2014.The UK participation in its preparation was entrusted by TechnicalCommittee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre opticinterconnecting devices and passive components.A list of organizations r

3、epresented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0

4、580 81741 0ICS 33.180.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 August 2014.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STAN

5、DARDBS EN 61753-053-2:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61753-053-2 July 2014 ICS 33.180.20 English Version Fibre optic interconnecting devices and passive components - Performance standard - Part 053-2: Non-connectorized single-mode fibre, electrically controlled, variable op

6、tical attenuator for category C - Controlled environments (IEC 61753-053-2:2014) Dispositifs dinterconnexion et composants passifs fibres optiques - Norme de performance - Partie 053-2: Affaiblisseur optique variable command lectriquement, fibres unimodales non connectoris pour la catgorie C - Envir

7、onnements contrls (CEI 61753-053-2:2014) Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 053-2: Nicht mit Steckverbindern versehene, elektrisch kontrolliert nderbare optische Dmpfungsglieder fr Einmodenfasern fr die Kategorie C - Kontrollierte Umgebung (IEC 61

8、753-053-2:2014) This European Standard was approved by CENELEC on 2014-04-23. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and

9、bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under th

10、e responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia

11、, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for

12、 Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Memb

13、ers. Ref. No. EN 61753-053-2:2014 E BS EN 61753-053-2:2014EN 61753-053-2:2014 - 2 - Foreword The text of document 86B/3645/CDV, future edition 1 of IEC 61753-053-2, prepared by SC 86B “Fibre optic interconnecting devices and passive components“ of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CE

14、NELEC parallel vote and approved by CENELEC as EN 61753-053-2:2014. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2015-01-23 latest date by which the national standards

15、 conflicting with the document have to be withdrawn (dow) 2017-04-23 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notic

16、e The text of the International Standard IEC 61753-053-2:2014 was approved by CENELEC as a European Standard without any modification. BS EN 61753-053-2:2014- 3 - EN 61753-053-2:2014 Annex ZA (normative) Normative references to international publications with their corresponding European publication

17、s The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE

18、1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC

19、60793-2-50 - Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres EN 60793-2-50 - IEC 60794-2-50 - Optical fibre cables - Part 2-50: Indoor cables - Family specification for simplex and duplex cables for use in terminated cable assemblies EN 607

20、94-2-50 - IEC 60869-1 - Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic specification EN 60869-1 - IEC 61300 series Fibre optic interconnecting devices and passive components - Basic test and measurement procedures EN 61300 ser

21、ies IEC 61300-2-1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-1 - IEC 61300-2-4 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2

22、-4: Tests - Fibre/cable retention EN 61300-2-4 - IEC 61300-2-9 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock EN 61300-2-9 - +AC 2011 IEC 61300-2-14 - Fibre optic interconnecting devices and passive components - Basic te

23、st and measurement procedures - Part 2-14: Tests - High optical power EN 61300-2-14 - IEC 61300-2-17 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold EN 61300-2-17 - BS EN 61753-053-2:2014EN 61753-053-2:2014 - 4 - IEC 6130

24、0-2-18 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance EN 61300-2-18 - IEC 61300-2-19 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -

25、 Part 2-19: Tests - Damp heat (steady state) EN 61300-2-19 - IEC 61300-2-22 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature EN 61300-2-22 - IEC 61300-2-42 - Fibre optic interconnecting devices and passive

26、 components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for strain relief EN 61300-2-42 - IEC 61300-3-2 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examinations and measurements - Polarization depe

27、ndent loss in a single-mode fibre optic device EN 61300-3-2 - IEC 61300-3-3 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-3: Examinations and measurements - Active monitoring of changes in attenuation and return loss EN 61300-3-3 - IEC

28、61300-3-7 (mod) - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components EN 61300-3-7 - +FprAA 2011 IEC 61300-3-14 - Fibre optic inte

29、rconnecting devices and passive components - Basic test and measurement procedures - Part 3-14: Examinations and measurements - Accuracy and repeatability of the attenuation settings of a variable attenuator EN 61300-3-14 - IEC 61300-3-21 - Fibre optic interconnecting devices and passive components

30、- Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time FprEN 61300-3-21 - IEC 61753-1 2007 Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards EN 61753-1 2007 IEC/TR 6234

31、3-6-5 - Dynamic modules - Part 6-5: Design guide - Investigation of operating mechanical shock and vibration tests for dynamic modules - - BS EN 61753-053-2:2014 2 IEC 61753-053-2:2014 IEC 2014 CONTENTS 1 Scope 5 2 Normative references 5 3 Terms and definitions 6 4 Test conditions 6 5 Test report .

32、7 6 Reference components 7 7 Performance requirements 7 7.1 Dimensions . 7 7.2 Test details and requirements . 7 Annex A (normative) Sample size 11 Bibliography 12 Table 1 Single-mode spectral bands 7 Table 2 Test details and requirements . 8 Table A.1 Number of samples for each test 11 BS EN 61753-

33、053-2:2014IEC 61753-053-2:2014 IEC 2014 5 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD Part 053-2: Non-connectorized, single-mode fibre, electrically controlled, variable optical attenuator for category C Controlled environments 1 Scope This part of IEC 61753 conta

34、ins the minimum initial test and measurement requirements and severities which non-connectorized single-mode fibre electrically controlled variable optical attenuator needs to satisfy in order to be categorised as meeting the requirements of category C-Controlled environments, as defined in Annex A

35、of IEC 61753-1:2007. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document

36、 (including any amendments) applies. IEC 60793-2-50, Optical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres IEC 60794-2-50, Optical fibre cables Part 2-50: Indoor cables Family specification for simplex and duplex cables for use in terminated cable as

37、semblies IEC 60869-1, Fibre optic interconnecting devices and passive components Fibre optic passive power control devices Part 1: Generic specification IEC 61300 (all parts), Fibre optic interconnecting devices and passive components Basic test and measurement procedures IEC 61300-2-1, Fibre optic

38、interconnecting devices and passive components Basic test and measurement procedures Part 2-1: Tests Vibration (sinusoidal) IEC 61300-2-4, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-4: Tests Fibre/cable retention IEC 61300-2-9, Fibre optic

39、 interconnecting devices and passive components Basic test and measurement procedures Part 2-9: Tests Shock IEC 61300-2-14, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-14: Tests High optical power IEC 61300-2-17, Fibre optic interconnecting

40、 devices and passive components Basic test and measurement procedures Part 2-17: Tests Cold IEC 61300-2-18, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-18: Tests Dry heat High temperature endurance IEC 61300-2-19, Fibre optic interconnectin

41、g devices and passive components Basic test and measurement procedures Part 2-19: Tests Damp heat (steady state) BS EN 61753-053-2:2014 6 IEC 61753-053-2:2014 IEC 2014 IEC 61300-2-22, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-22: Tests Ch

42、ange of temperature IEC 61300-2-42, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-42: Tests Static side load for connectors IEC 61300-3-2, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3

43、-2: Examination and measurements Polarization dependent loss in a single-mode fibre optic device IEC 61300-3-3, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-3: Examinations and measurements Active monitoring of changes in attenuation and ret

44、urn loss IEC 61300-3-7, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-7: Examinations and measurements Wavelength dependence of attenuation and return loss of single mode components IEC 61300-3-14, Fibre optic interconnecting devices and pass

45、ive components Basic test and measurement procedures Part 3-14: Examinations and measurements Accuracy and repeatability of the attenuation settings of a variable attenuator IEC 61300-3-21, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-21: Ex

46、aminations and measurements Switching time and bounce time IEC 61753-1:2007, Fibre optic interconnecting devices and passive components performance standard Part 1: General and guidance for performance standard IEC TR 62343-6-5, Dynamic modules Part 6-5: Investigation of operating mechanical shock a

47、nd vibration tests for dynamic modules 3 Terms and definitions For the purposes of this document, the terms and definitions given in IEC 60869-1, as well as the following, apply. 3.1 operational vibration vibration test in which relevant parameters should be monitored during the test 3.2 operational

48、 shock shock test in which relevant parameters should be monitored during the test 3.3 response time elapsed time from the time the control energy (voltage or current) is applied (changed) to the time attenuation reaches between 90 % and 110 % dB of steady-state value 4 Test conditions Unless otherw

49、ise specified, all test methods are in accordance with the IEC 61300 series. The samples shall be terminated onto single-mode fibres as per IEC 60793-2-50, category B1.1, B1.3 or B6 in either coated fibres (primary and secondary) or reinforced cable format as per IEC 60794-2-50. Non-connectorized single-mode fibre electrically controlled variable optical BS EN 61753-0