EN 61753-089-2-2013 en Fibre optic interconnecting devices and passive components - Performance standard - Part 089-2 Non-connectorized single-mode bidirectional OTDR monitoring WW.pdf

1、BSI Standards PublicationFibre optic interconnecting devices and passive components Performance standardPart 089-2: Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C Controlled environmentBS EN 61753-089-2:2013National forewordThis British Standard is the UK imp

2、lementation of EN 61753-089-2:2013. Itis identical to IEC 61753-089-2:2013.The UK participation in its preparation was entrusted by TechnicalCommittee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre opticinterconnecting devices and passive components.A list of organizations represented on this

3、 committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2013.Published by BSI Standards Limited 2013ISBN 978 0 580 71348 4ICS 33.

4、180.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2013.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61753-089-

5、2:2013EUROPEAN STANDARD EN 61753-089-2 NORME EUROPENNE EUROPISCHE NORM June 2013 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 201

6、3 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61753-089-2:2013 E ICS 33.180.20 English version Fibre optic interconnecting devices and passive components - Performance standard - Part 089-2: Non-connectorized single-mode bidir

7、ectional OTDR monitoring WWDM devices for category C - Controlled environment (IEC 61753-089-2:2013) Dispositifs dinterconnexion et composants passifs fibres optiques - Norme de performance - Partie 089-2: Dispositifs WWDM de surveillance par OTDR, unimodaux non connectoriss bidirectionnels pour la

8、catgorie C - Environnement contrl (CEI 61753-089-2:2013) Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 089-2: Nicht mit Steckverbindern versehene bidirektionale OTDR-berwachungs-WWDM-Bauteile fr die Kategorie C - kontrollierte Umgebung (IEC 61753-089-2:2013)

9、 This European Standard was approved by CENELEC on 2013-04-10. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical

10、 references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibilit

11、y of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Form

12、er Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 61753-089-2:2013EN 61753-089-2:

13、2013 - 2 - Foreword The text of document 86B/3454/CDV, future edition 1 of IEC 61753-089-2, prepared by SC 86B “Fibre optic interconnecting devices and passive components” of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-089-2:2013. The f

14、ollowing dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-01-10 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-04-10 Atte

15、ntion is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61753-089-2:2013 was approve

16、d by CENELEC as a European Standard without any modification. BS EN 61753-089-2:2013- 3 - EN 61753-089-2:2013 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively reference

17、d in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modificatio

18、ns, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 61300-2-1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-1 - IEC 61300-2-4 - Fibre optic interconnecti

19、ng devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention EN 61300-2-4 - IEC 61300-2-9 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock EN 61300-2-9 - IEC 61300-2-1

20、4 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - High optical power EN 61300-2-14 - IEC 61300-2-17 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold

21、 EN 61300-2-17 - IEC 61300-2-18 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance EN 61300-2-18 - IEC 61300-2-19 - Fibre optic interconnecting devices and passive components - Basic test and

22、 measurement procedures - Part 2-19: Tests - Damp heat (steady state) EN 61300-2-19 - IEC 61300-2-22 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature EN 61300-2-22 - IEC 61300-2-42 - Fibre optic interconne

23、cting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for connectors EN 61300-2-42 - BS EN 61753-089-2:2013EN 61753-089-2:2013 - 4 - Publication Year Title EN/HD Year IEC 61300-2-44 - Fibre optic interconnecting devices and passive compone

24、nts - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices EN 61300-2-44 - IEC 61300-3-2 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examinations and measurements - Polariza

25、tion dependent loss in a single-mode fibre optic device EN 61300-3-2 - IEC 61300-3-6 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss EN 61300-3-6 - IEC 61300-3-7 - Fibre optic interconnecting

26、 devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components EN 61300-3-7 - IEC 61300-3-20 - Fibre optic interconnecting devices and passive components - Basic test a

27、nd measurement procedures - Part 3-20: Examinations and measurements - Directivity of fibre optic branching devices EN 61300-3-20 - IEC 61753-1 2007 Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards EN 61753-1 200

28、7 BS EN 61753-089-2:2013 2 61753-089-2 IEC:2013(E) CONTENTS 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 6 4 Test 6 5 Test report 7 6 Performance requirements . 7 6.1 Reference components 7 6.2 Dimensions . 7 6.3 Sample size 7 6.4 Test details and requirements . 7 Annex A (normat

29、ive) Sample size 12 Annex B (Informative) General information for OTDR monitoring WWDM device 13 Bibliography 15 Figure B.1 Functional principle of a monitoring WWDM device . 13 Figure B.2 Example for the integration of the OTDR monitoring WWDM at central office and customer side . 14 Table 1 Test d

30、etails and requirements (1 of 5) . 7 Table A.1 Sample size . 12 BS EN 61753-089-2:201361753-089-2 IEC:2013(E) 5 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD Part 089-2: Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C Controll

31、ed environment 1 Scope This part of IEC 61753 contains the minimum initial performance, test and measurement requirements and severities which a fibre optic pigtailed wide wavelength division multiplexing (WWDM) device for monitoring passive optical networks (PON) using an optical time-domain reflec

32、tometer (OTDR) satisfies in order to be categorized as meeting the requirements of category C (controlled environments), as defined in Annex A of IEC 61753-1:2007. Annex B of this standard provides information concerning the principle and function of the OTDR monitoring WWDM. 2 Normative references

33、The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 613

34、00-2-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-1: Tests Vibration (sinusoidal) IEC 61300-2-4, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-4: Tests Fibre/cable retention IEC 61

35、300-2-9, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-9: Tests Shock IEC 61300-2-14, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-14: Tests High optical power IEC 61300-2-17, Fibre o

36、ptic interconnecting devices and passive components Basic test and measurement procedures Part 2-17: Tests Cold IEC 61300-2-18, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-18: Tests Dry heat High temperature endurance IEC 61300-2-19, Fibre

37、optic interconnecting devices and passive components Basic test and measurement procedures Part 2-19: Tests Damp heat (steady state) IEC 61300-2-22, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-22: Tests Change of temperature IEC 61300-2-42,

38、 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-42: Tests Static side load for connectors BS EN 61753-089-2:2013 6 61753-089-2 IEC:2013(E) IEC 61300-2-44, Fibre optic interconnecting devices and passive components Basic test and measurement pr

39、ocedures Part 2-44: Tests Flexing of the strain relief of fibre optic devices IEC 61300-3-2, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-2: Examination and measurements Polarization dependent loss in a single-mode fibre optic device IEC 613

40、00-3-6, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-6: Examination and measurements Return loss IEC 61300-3-7, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-7: Examination and measur

41、ements Wavelength dependence of attenuation and return loss of single mode components IEC 61300-3-20, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-20: Examination and measurements Directivity of fibre optic branching devices IEC 61753-1:2007

42、, Fibre optic interconnecting devices and passive components performance standard Part 1: General and guidance for performance 3 Terms and definitions For the purposes of this document, the following terms and definitions, as well as those given in IEC 62074-1, apply. 3.1 OTDR monitoring WWDM device

43、 WWDM device for monitoring PON using an OTDR that has three ports Note 1 to entry: Signal wavelengths are transmitted between the common port and the optical line terminal (OLT) port. OTDR wavelengths are transmitted between the common port and the OTDR port Note 2 to entry: Annex B of this standar

44、d provides information concerning the function of the OTDR monitoring WWDM device. 4 Test Unless otherwise specified, all test methods are in accordance with the IEC 61300 series. Each test defines the number of samples to be evaluated. The samples used for each test are intended to be previously un

45、stressed new samples but may also be selected from previously used samples if desired. The samples shall have pigtails of single-mode fibres as per IEC 60793-2-50, category B 1.1, B 1.3 or B 6 in either coated fibres (primary and secondary) or reinforced cable format. All measurements shall be carri

46、ed out at standard atmosphere condition defined in IEC 61300-1, unless otherwise stated. All tests shall be carried out over the signal wavelength ranges of 1 260 nm to 1 360 nm, 1 480 nm to 1 500 nm, 1 550 nm to 1 560 nm, and over the OTDR wavelength range, 1 620 nm to 1 630 nm or 1 645 nm to 1 655

47、 nm, unless otherwise specified. NOTE 1 310 nm, 1 490 nm and 1 550 nm are the nominal or centre wavelengths, stated for the ranges 1 260 nm to 1 360 nm, 1 480 nm to 1 500 nm and 1 550 nm to 1 560 nm as defined in ITU-T Recommendations G.983.3 1 1and G.984.2 2 and IEEE standard 802.3ah-2004 3. 1Refer

48、ences in square brackets refer to the Bibliography. BS EN 61753-089-2:201361753-089-2 IEC:2013(E) 7 5 Test report Fully documented test reports and supporting evidence shall be prepared and be available for inspection as evidence that the tests have been carried out and complied with. 6 Performance

49、requirements 6.1 Reference components The testing for these components does not require the use of reference components. 6.2 Dimensions Dimensions shall comply with those given in appropriate manufacturers drawings. 6.3 Sample size Sample sizes for the tests are defined in Annex A. 6.4 Test details and requirements Table 1 Test details and requirements (1 of 5) No. Test Requirement Details 1 Insertion loss (attenua