1、BRITISH STANDARDBS EN 61753-1:2007Fibre optic interconnecting devices and passive components performance standard Part 1: General and guidance for performance standardsThe European Standard EN 61753-1:2007 has the status of a British StandardICS 33.180.20g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g5
2、0g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 61753-1:2007This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2007 BSI
3、2007ISBN 978 0 580 53367 9National forewordThis British Standard is the UK implementation of EN 61753-1:2007. It is identical to IEC 61753-1:2007. It supersedes BS EN 61753-1-1:2001 which is withdrawn.The UK participation in its preparation was entrusted by Technical Committee GEL/86, Fibre optics,
4、to Subcommittee GEL/86/2, Fibre optic interconnecting devices and passive components.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for it
5、s correct application.Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARD EN 61753-1 NORME EUROPENNE EUROPISCHE NORM November 2007 CENELEC European Committee for Electrotechnical Standardization
6、Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61753-1:2007 E ICS 33
7、.180.20 Supersedes EN 61753-1-1:2001English version Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards (IEC 61753-1:2007) Norme de qualit de fonctionnement des dispositifs dinterconnexion et composants passifs fibr
8、es optiques - Partie 1: Gnralits et lignes directrices relatives aux normes de qualit de fonctionnement (CEI 61753-1:2007) Lichtwellenleiter -Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 1: Allgemeines und Leitfaden fr Betriebsverhaltensnormen (IEC 61753-1:2007) This European
9、Standard was approved by CENELEC on 2007-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references con
10、cerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member int
11、o its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Irela
12、nd, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Foreword The text of document 86B/2452/FDIS, future edition 1 of IEC 61753-1, prepared by SC 86B, Fibre optic interconnecting de
13、vices and passive components, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61753-1 on 2007-10-01. This European Standard supersedes EN 61753-1-1:2001. Specific technical changes vis-vis EN 61753-1-1:2001 include that EN 61753-1:2007 cov
14、ers all passive fibre optic products, including connectors, passive optical components, fibre management systems and closures. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop)
15、2008-07-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2010-10-01 Annex ZA has been added by CENELEC. _ Notice This document contains material that is Copyright 2006, Telcordia Technologies, Inc. (“Telcordia“). All rights reserved. The reader is adv
16、ised that this IEC document and Telcordia source(s) may differ, and the context and use of said material in this IEC document may differ from that of Telcordia. Telcordia makes no representation or warranty, express or implied, with respect to the sufficiency, accuracy, or utility of any information
17、 or opinion contained herein. Any use of or reliance upon said information or opinion is at the risk of the user. Telcordia shall not be liable for any damage or injury incurred by any person arising out of the sufficiency, accuracy, or utility of any information or opinion contained herein. _ Endor
18、sement notice The text of the International Standard IEC 61753-1:2007 was approved by CENELEC as a European Standard without any modification. _ EN 61753-1:2007 2 CONTENTS INTRODUCTION.5 1 Scope.6 2 Normative references6 3 Terms and definitions .8 4 Preparation of a performance standard .9 4.1 Perfo
19、rmance standard title.9 4.2 Tests.9 4.3 Details.10 4.4 Requirements 10 4.5 Sample size.10 4.6 Sample definition.10 4.7 Groupings/sequences 10 4.8 Pass/fail criteria.10 4.9 Reference product definition 10 4.10 Performance standard test report.10 4.11 Environmental aspects.11 Annex A (normative) Tests
20、 and severities for performance standards .12 Annex B (informative) Test sequencing for category O33 Annex C (informative) Mixing of products with different performance category 36 Annex D (informative) Performance standard numbering 37 Annex E (informative) Minimum temperature value in Finland .38
21、Bibliography39 Table A.1 General operating service environments and performance categories .13 Table A.2 Connectors and passive components Category C Controlled environment14 Table A.3 Connectors and passive components Category U Uncontrolled environment15 Table A.4a Passive components Category O Un
22、controlled environment 17 Table A.4b Connectors Category O Uncontrolled environment.18 Table A.5 Connectors and passive components Category E Extreme environment .20 Table A.6 Fibre management systems Category C Controlled environment 22 Table A.7 Fibre management systems Category U Uncontrolled env
23、ironment.23 Table A.8 Closures Category C Controlled environment 24 Table A.9 Closures Category A Aerial environment .25 Table A.10 Closures Category G Ground environment 27 Table A.11 Closures Category S Subterranean environment .29 Table A.12 Connectors.31 EN 61753-1:2007 3 Annex ZA (normative Nor
24、mative references to international publications with their corresponding European publications 40Table A.15 Closures.32 Table B.1 Test sequence for passive optical components category O33 Table B.2 Test sequence connectors category O 34 EN 61753-1:2007 4 Table A.13 Passive optical components31 Table
25、 A.14 Fibre management systems 32 INTRODUCTION Performance standards define the requirements for standard optical performance under a set of specified conditions. Each standard contains a series or a set of tests and measurements with clearly stated conditions, severities and pass/fail criteria. The
26、 series of tests, commonly referred to as an operating service environment or performance category, is intended to be run on a one-off basis to prove the products ability to satisfy the requirements of a specific application, market sector or user group. The subsequent parts of this document define
27、those sets of tests which form each operating service environment or performance category and which have been standardised for international use. A product that has been shown to meet all the requirements of a performance standard may be declared as complying with that performance standard. Products
28、 having the same classification from one manufacturer that satisfy a performance standard will operate within the boundaries set by the performance standard. Intermateability or interchangeability of products from different suppliers (having the same classification and conforming to the same perform
29、ance standard) can only be guaranteed when these products are also meeting the interface standards. Only in this condition an equivalent level of performance will be provided when they are used together (for example, in the case of optical connectors). Conformance to a performance standard is not a
30、guarantee of lifetime assured performance or reliability. Reliability testing must be the subject of a separate test schedule, where the tests and severities selected are truly representative of the requirements of this reliability test programme. Consistency of manufacture should be maintained usin
31、g a recognised Quality Assurance programme whilst the reliability of product should be evaluated using the procedures recommended in IEC 62005. EN 61753-1:2007 5 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD Part 1: General and guidance for performance standards 1 S
32、cope This part of IEC 61753 deals with performance standards for all passive fibre optic products, including connectors, passive optical components, fibre management systems and closures. The IEC 61753 series is published in multiple parts. This Part 1 covers general information on performance stand
33、ards. It defines those tests and severities which form the performance categories or general operating service environments and identifies those tests which are considered to be product specific. Test and severity details are given in Annex A. Part 1 also includes references, definitions and rules f
34、or creating a performance standard, together with informative annexes, such as a description of test sequencing given in Annex B, and other pertinent information. Subsequent parts which form IEC 61753 are known as performance standards and are numbered according to the classification defined in Anne
35、x C. These standards contain the minimum test and measurement severities which a specific product must satisfy, in order to be categorized as meeting the requirements for use in a particular service environment. A product performance standard will contain a combination of those tests and measurement
36、s which are common to all passive fibre optic products, for a particular service environment or performance category, and those which are considered specific to that particular product in that environment. 2 Normative references The following referenced documents are indispensable for the applicatio
37、n of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60529, Degrees of protection provided by enclosures (IP Code) IEC 60590, Determination of the aromatic hydrocarbon c
38、ontent of new mineral insulating oils IEC 61300-2-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-1: Tests Vibration (sinusoidal) IEC 61300-2-2, Fibre optic interconnecting devices and passive components Basic test and measurement procedures
39、 Part 2-2: Tests Mating durability IEC 61300-2-4, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-4: Tests Fibre/cable retention IEC 61300-2-5, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Par
40、t 2-5: Tests Torsion/Twist IEC 61300-2-6, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-6: Tests Tensile strength of coupling mechanism IEC 61300-2-7:1995, Fibre optic interconnecting devices and passive components Basic test and measurement
41、procedures Part 2-7: Tests Bending moment EN 61753-1:2007 6 IEC 61300-2-9, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-9: Tests Shock IEC 61300-2-10:1995, Fibre optic interconnecting devices and passive components Basic test and measurement
42、 procedures Part 2-10: Tests Crush resistance IEC 61300-2-11:1995, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-11: Tests Axial compression IEC 61300-2-12, Fibre optic interconnecting devices and passive components Basic test and measurement
43、 procedures Part 2-12: Tests Impact IEC 61300-2-17, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-17: Tests Cold IEC 61300-2-18, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-18: Tests
44、 Dry heat High temperature endurance IEC 61300-2-19, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-19: Tests Damp heat (steady state) IEC 61300-2-21, Fibre optic interconnecting devices and passive components Basic test and measurement proced
45、ures Part 2-21: Tests Composite temperature-humidity cyclic test IEC 61300-2-22, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-22: Tests Change of temperature IEC 61300-2-23, Fibre optic interconnecting devices and passive components Basic te
46、st and measurement procedures Part 2-23: Tests Sealing for non-pressurized closures of fibre optic devices IEC 61300-2-26, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-26: Tests Salt mist IEC 61300-2-27, Fibre optic interconnecting devices a
47、nd passive components Basic test and measurement procedures Part 2-27: Tests Dust Laminar flow IEC 61300-2-28, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-28: Tests Industrial atmosphere (sulphur dioxide) IEC 61300-2-33, Fibre optic interco
48、nnecting devices and passive components Basic test and measurement procedures Part 2-33: Tests Assembly and disassembly of closures IEC 61300-2-34, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-34: Tests Resistance to solvents and contamining
49、 fluids IEC 61300-2-37, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-37: Tests Cable bending for closures IEC 61300-2-38, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-38: Tests Sealing for pr
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1