EN 61753-1-3-2014 en Fibre optic interconnecting devices and passive components - Performance standard - Part 1-3 General and guidance for single-mode fibre optic connector and cab.pdf

1、BSI Standards PublicationFibre optic interconnecting devices and passive components Performance standardPart 1-3: General and guidance for single-mode fibre optic connector and cable assembly for industrial environment, Category IBS EN 61753-1-3:2014National forewordThis British Standard is the UK i

2、mplementation of EN 61753-1-3:2014. It isidentical to IEC 61753-1-3:2014. It supersedes DD IEC/PAS 61753-1-3:2009which is withdrawn.BSI, as a member of CEN, is obliged to publish EN 61753-1-3:2014 as aBritish Standard. However, attention is drawn to the fact that during thedevelopment of this Europe

3、an Standard, the UK committee voted againstits approval as a European Standard as they considered that some of thevalues in the performance tests were not sufficiently different to standardconnectors (described in BS EN 61753-1:2007) to warrant the descriptionindustrial and the correlation with the

4、M3I3C3E3 requirementsunsatisfactory (described in PD ISO/IEC TR 29106:2007+A1:2012).The UK participation in its preparation was entrusted by TechnicalCommittee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre opticinterconnecting devices and passive components.A list of organizations represente

5、d on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 75828

6、 7ICS 33.180.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 March 2015.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN

7、61753-1-3:2014EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 61753-1-3 July 2014 ICS 33.180.20 English Version Fibre optic interconnecting devices and passive components - Performance standard - Part 1-3: General and guidance forsingle-mode fibre optic connector and cable assembly forindustrial e

8、nvironment, Category I (IEC 61753-1-3:2014) Dispositifs dinterconnexion et composants passifs fibresoptiques - Norme de performance - Partie 1-3 : Gnralits et lignes directrices relatives aux connecteurs fibresoptiques unimodales et aux cordons en environnement industriel, Catgorie I (CEI 61753-1-3:

9、2014) Lichtwellenleiter - Verbindungselemente und passiveBauteile - Betriebsverhalten - Teil 1-3: Allgemeines undLeitfaden fr Einmoden-Lichtwellenleiter-Steckverbinderund konfektionierte LWL-Kabel in rauer industrieller Umgebung der Kategorie I (IEC 61753-1-3:2014) This European Standard was approve

10、d by CENELEC on 2014-06-27. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationa

11、l standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own

12、language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, F

13、rance, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de

14、Normalisation ElectrotechniqueEuropisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61753-1-3:2014 E Foreword The text

15、of document 86B/3752/FDIS, future edition 1 of IEC 61753-1-3, prepared by SC 86B “Fibre optic interconnecting devices and passive components“ of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-1-3:2014. The following dates are fixed: latest

16、 date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2015-03-27 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2017-06-27 Attention is drawn to the possibilit

17、y that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61753-1-3:2014 was approved by CENELEC as a European Standar

18、d without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61300-2-35 NOTE Harmonised as EN 61300-2-35. BS EN 61753-1-3:2014 EN 61753-1-3:2014Annex ZA (normative) Normative references to international publications with

19、 their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document

20、including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.e

21、u. Publication Year Title EN/HD Year IEC 60068-2-60 - Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test EN 60068-2-60 - IEC 60529 1989 Degrees of protection provided by enclosures (IP Code) EN 60529 1991 IEC 60793-2-50 - Optical fibres - Part 2-50: Product specific

22、ations - Sectional specification for class B single-mode fibres EN 60793-2-50 - IEC 61300 (series) - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures EN 61300 (series) - IEC 61300-2-1 - Fibre optic interconnecting devices and passive components - Bas

23、ic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-1 - IEC 61300-2-2 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-2: Tests - Mating durability EN 61300-2-2 - IEC 61300-2-4 - Fibre optic interconnec

24、ting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention EN 61300-2-4 - IEC 61300-2-5 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion EN 61300-2-5 - IEC 61300

25、2-6 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism EN 61300-2-6 - IEC 61300-2-7 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Par

26、t 2-7: Tests - Bending moment EN 61300-2-7 - IEC 61300-2-9 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock EN 61300-2-9 - BS EN 61753-1-3:2014 EN 61753-1-3:2014IEC 61300-2-10 - Fibre optic interconnecting devices and pass

27、ive components - Basic test and measurement procedures - Part 2-10: Tests - Crush resistance EN 61300-2-10 - IEC 61300-2-12 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-12: Tests - Impact EN 61300-2-12 - IEC 61300-2-22 - Basic test and

28、 measurement procedures - Part 2-22: Tests - Change of temperature - - IEC 61300-2-26 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-26: Tests - Salt mist EN 61300-2-26 - IEC 61300-2-34 - Fibre optic interconnecting devices and passive c

29、omponents - Basic test and measurement procedures - Part 2-34: Tests - Resistance to solvents and contaminating fluids of interconnecting components and closures EN 61300-2-34 - IEC 61300-2-46 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part

30、 2-46: Tests - Damp heat cyclic EN 61300-2-46 - IEC 61300-3-1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination EN 61300-3-1 - IEC 61300-3-3 - Fibre optic interconnecting devices and pas

31、sive components - Basic test and measurement procedures - Part 3-3: Examinations and measurements - Active monitoring of changes in attenuation and return loss EN 61300-3-3 - IEC 61300-3-4 2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part

32、3-4: Examinations and measurements - Attenuation EN 61300-3-4 2013 IEC 61300-3-6 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss EN 61300-3-6 - IEC 61300-3-11 - Fibre optic interconnecting de

33、vices and passive components - Basic test and measurement procedures - Part 3-11: Examinations and measurements - Engagement and separation forces EN 61300-3-11 - IEC 61300-3-28 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinat

34、ions and measurements - Transient loss EN 61300-3-28 - BS EN 61753-1-3:2014 EN 61753-1-3:2014IEC 61300-3-34 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-34: Examinations and measurements - Attenuation of random mated connectors EN 6130

35、0-3-34 - IEC 61300-3-35 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers EN 61300-3-35 - IEC 61753-1 2007 Fibre optic interconnecti

36、ng devices and passive components performance standard - Part 1: General and guidance for performance standards EN 61753-1 2007 IEC 61754 (series) - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces EN 61754 (series) - IEC 61755 (series) - Fibre optic inte

37、rconnecting devices and passive components -Fibre optic connector optical interfaces EN 61755 (series) - IEC 61755-1 - Fibre optic interconnecting devices and passive components -Fibre optic connector optical interfaces - Part 1: Optical interfaces for single mode non-dispersion shifted fibres - Gen

38、eral and guidance EN 61755-1 - ISO/IEC 24702 - Information technology - Generic cabling - Industrial premises - - ISO/IEC/TR 29106 - Information technology - Generic cabling - Introduction to the MICE environmental classification - - BS EN 61753-1-3:2014 EN 61753-1-3:2014 2 IEC 61753-1-3:2014 IEC 20

39、14 CONTENTS 1 Scope 5 2 Normative references 5 3 Abbreviations 7 4 Industrial environment . 7 4.1 General . 7 4.2 Cross reference with MICE . 7 5 Tests . 8 5.1 General . 8 5.2 Sample definition 8 5.3 Sample size 8 6 Test report . 9 7 Reference component 9 8 Performance requirements 9 8.1 General . 9

40、 8.2 Dimensions . 9 8.3 Test preparation and accomplishment . 9 8.4 Performance criteria . 9 9 Performance tests . 10 Annex A (normative) Sample size 18 Bibliography 19 Figure 1 Example of a free plug and a socket 8 Figure 2 Example of a plug coupler plug 8 Table 1 Single mode attenuation and return

41、 loss grades at 1 310 nm and 1 550 nm 10 Table 2 Test description (1 of 8) 10 Table A.1 Sample size and product sourcing requirements 18 BS EN 61753-1-3:2014 EN 61753-1-3:2014IEC 61753-1-3:2014 IEC 2014 5 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD Part 1-3: Gener

42、al and guidance for single-mode fibre optic connector and cable assembly for industrial environment, Category I 1 Scope This part of IEC 61753 defines the minimum initial performance, test and measurement requirements and severities which a connector or cable assembly with single-mode fibres needs t

43、o satisfy in order to be categorized as meeting IEC Category I (industrial environment). Category I is an additional environmental category to C, U, O and E already described in IEC 61753-1. Category I is based on the MICE Table described in ISO/IEC 24702. The performance tests evaluate the product

44、for two basic acceptance criteria: mechanical integrity and optical transmission requirements, by simulating the effects of exposure to the environment in which it will be installed, simulating installation and intervention conditions, and evaluating specified features of the product. The defined pe

45、rformance test procedures simulate the situation in a mated condition under use in an industrial environment. It is not the intention to simulate the situation: when being mated or demated; during the assembling of the connector; during transportation and storage of the connector. Reliability tests

46、for life time expectations are not covered by this standard. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the l

47、atest edition of the referenced document (including any amendments) applies. IEC 60068-2-60, Environmental testing Part 2: Tests Test Ke: Flowing mixed gas corrosion test IEC 60529:1989, Degrees of protection provided by enclosures (IP Code) IEC 60793-2-50, Optical fibres Part 2-50: Product specific

48、ations Sectional specification for class B single-mode fibres IEC 61300 (all parts), Fibre optic interconnecting devices and passive components Basic test and measurement procedures IEC 61300-2-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2

49、1: Tests Vibration (sinusoidal) IEC 61300-2-2, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-2: Tests Mating durability BS EN 61753-1-3:2014 EN 61753-1-3:2014 6 IEC 61753-1-3:2014 IEC 2014 IEC 61300-2-4, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-4: Tests Fibre/cable retention IEC 61300-2-5, Fibre optic in