EN 61753-101-2-2006 en Fibre optic interconnecting devices and passive components performance standard - Part 101-2 Fibre management systems for category C - Controlled environment.pdf

1、BRITISH STANDARDBS EN 61753-101-2: 2006Fibre optic interconnecting devices and passive components performance standard Part 101-2: Fibre management systems for category C Controlled environmentThe European Standard EN 61753-101-2:2006 has the status of a British StandardICS 33.180.20g49g50g3g38g50g5

2、1g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 61753-101-2:2006This British Standard was published under the authority of the Standards Policy and Strategy C

3、ommittee on 31 January 2007 BSI 2007ISBN 978 0 580 50042 8National forewordThis British Standard was published by BSI. It is the UK implementation of EN 61753-101-2:2006. It is identical with IEC 61753-101-2:2006.The UK participation in its preparation was entrusted by Technical Committee GEL/86, Fi

4、bre optics, to Subcommittee GEL/86/2, Fibre optic interconnecting devices and passive components.A list of organizations represented on GEL/86/2 can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible

5、for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARD EN 61753-101-2 NORME EUROPENNE EUROPISCHE NORM November 2006 CENELEC European Committee for Electrotechnical Standar

6、dization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61753-101-2:

7、2006 E ICS 33.180.20 English version Fibre optic interconnecting devices and passive components performance standard Part 101-2: Fibre management systems for category C - Controlled environment (IEC 61753-101-2:2006) Norme de qualit de fonctionnement des dispositifs dinterconnexion et composants pas

8、sifs fibres optiques Partie 101-2: Systmes de gestion de fibres pour la Catgorie C - Environnement contrl (CEI 61753-101-2:2006) Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten Teil 101-2: Einzelfasermanagementsysteme fr die Kategorie C - Geregelte Umgebung (IEC 6175

9、3-101-2:2006) This European Standard was approved by CENELEC on 2006-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bi

10、bliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibi

11、lity of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hunga

12、ry, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Foreword The text of document 86B/2348/FDIS, future edition 1 of IEC 61753-101-2, prepared by SC 86B, Fibre op

13、tic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61753-101-2 on 2006-10-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publicati

14、on of an identical national standard or by endorsement (dop) 2007-07-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2009-10-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61753-101-2:2006 was a

15、pproved by CENELEC as a European Standard without any modification. _ 2 EN 61753-101-2:2006CONTENTS 1 2 3 3.1 3.2 4 5 5.1 5.2 5.3 5.4 5.5 6 6.1 6.2 6.3 6.4 6.5 6.6 7 7.1 7.2 3 EN 61753-101-2:2006INTRODUCTION.4 Scope.5 Normative references5 Terms, definitions and abbreviations .6 Terms and definition

16、s 7 Abbreviations.7 Environmental requirements .7 Test procedure .8 General .,8 Stationary use .8 Storage .9 Transportation .9 Installation or intervention9 General Requirements 10 Storage, transportation and packaging .10 Marking and identification 10 Materials .10 Traceability11 Safety11 Documenta

17、tion 11 Performance requirements12 Sample size.12 Performance details.12 Annex A (normative) Sample definition .17 Annex B (normative) Sample size.20 Annex C (informative) Access and reconfiguration/resplicing 22 Bibliography24 Figure A.1 Sample configuration with splices only.17 Figure A.2 Sample c

18、onfiguration with splices and connectors18 Table 1 Performance criteria requirements .12 Table 2 Mechanical performance requirements.13 Table 3 Environmental performance requirements for category C14 Table 4 Transportation and storage, mechanical performance requirements .15 Table 5 Transportation a

19、nd storage, environmental performance requirements .16 Table A.1 Fibre characteristics for the test samples17 Table B.1 Number of samples for each test 21 Annex ZA (normative) Normative references to international publications with theircorresponding European publications. 25INTRODUCTION This Perfor

20、mance Standard for fibre management systems defines the requirements for standard optical performance under a set of specified conditions. This standard contains a series or a set of tests and measurements with clearly stated conditions, severities and pass/fail criteria. The series of tests, common

21、ly referred to as an operating service environment or performance category, is intended to be a basis to prove the products ability to satisfy the requirements of a specific application, market sector or user group. A product that has been shown to meet all the requirements of this performance stand

22、ard may be declared as complying with this performance standard. Products having the same classification from one manufacturer that satisfy this performance standard, will operate within the boundaries set by the performance standard. There is no guarantee that products from different manufacturers,

23、 having the same classification and which conform to the same performance standard, will provide an equivalent level of performance when they are used together. Conformance with IEC environmental policy according to IEC Guide 109 and concerning the need to reduce the impacts on the natural environme

24、nt of fibre management system products during all phases of their life from acquiring materials to manufacturing, distribution, use, and end-of-life treatment (i.e. re-use, recycling and disposal) is indicated within each product specification. Conformance to a performance standard demonstrates that

25、 a product has passed a design verification test. It is not a guarantee of lifetime assured performance or reliability. Reliability testing must be the subject of a separate test schedule, where the tests and severities selected are such that they are truly representative of the requirements of this

26、 reliability test programme. Consistency of manufacture should be maintained using a recognised Quality Assurance programme whilst the reliability of a product should be evaluated using the procedures recommended in IEC 62005. Tests and measurements should be selected from the IEC 61300 series. 4 EN

27、 61753-101-2:2006FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD Part 101-2: Fibre management systems for Category C Controlled environment 1 Scope This part of IEC 61753 deals with performance standards for parts of fibre management systems. It defines those tests an

28、d severities which form the performance or general operating service environment, and identifies those tests which are considered to be product specific. Test and severity details are given. This part of IEC 61753 contains the minimum test and measurement severities which a specific product must sat

29、isfy in order to be categorised as meeting the IEC standard, Category C Controlled environment, as defined in Annex A of IEC 61753-1. More severe requirements may be agreed between the customer and the supplier. A product performance standard will contain a combination of those tests and measurement

30、s that are common to all products, for a particular service environment or performance category, and those that are considered specific to that particular product in that environment. 2 Normative references The following referenced documents are indispensable for the application of this document. Fo

31、r dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60068-2-64, Environmental testing, Part 2-64: Tests methods Test Fh: Vibration, broad-band random (digital control) and guidance IEC 60721

32、-3-1, Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Section 1: Storage. IEC 60721-3-2, Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Section 2

33、: Transportation. IEC 60793-2-50, Optical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres IEC 61300-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 1: General and guidance IEC 61300-2-1, Fibre op

34、tic interconnecting devices and passive components Basic test and measurement procedures Part 2-1: Tests Vibration (sinusoidal) IEC 61300-2-4 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-4: Tests Fibre/cable retention 5 EN 61753-101-2:2006IE

35、C 61300-2-9, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-9: Tests Shock IEC 61300-2-12, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-12: Tests Impact IEC 61300-2-17, Fibre optic int

36、erconnecting devices and passive components Basic test and measurement procedures Part 2-17: Tests Cold IEC 61300-2-18, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-18: Tests Dry heat High temperature endurance IEC 61300-2-19, Fibre optic in

37、terconnecting devices and passive components Basic test and measurement procedures Part 2-19: Tests Damp heat (steady state) IEC 61300-2-22, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-22: Tests Change of temperature IEC 61300-2-33, Fibre o

38、ptic interconnecting devices and passive components Basic test and measurement procedures Part 2-33: Tests Assembly and disassembly of closures IEC 61300-2-42, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-42: Tests Static side load for conne

39、ctors IEC 61300-3-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-1: Examinations and measurements Visual examination IEC 61300-3-3, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-3: E

40、xaminations and measurements Active monitoring of changes in attenuation and return loss IEC 61300-3-28, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-28: Examinations and measurements Transient loss IEC 61753-1, Fibre optic interconnecting d

41、evices and passive components Part 1: General and guidance for performance standards2IEC 62134-1, Fibre optic enclosures Part 1: Generic specification 3 Terms, definitions and abbreviations For the purposes of this document, the following terms, definitions and abbreviations apply. _ 2To be publishe

42、d. 6 EN 61753-101-2:20063.1 Terms and definitions 3.1.1 excursion loss loss monitored (at regular time intervals) during slow variations of environmental parameters 3.1.2 intervention gain access to modify, add, remove or repair fibre circuits, splices, connectors or other components between the inc

43、oming and outgoing cables of an existing fibre management system 3.1.3 installation establish and install a fibre management system, by adding new circuits, splices, connectors and other components, including the incoming and outgoing cables 3.1.4 installation conditions circumstances that must be f

44、ulfilled for an installation, including environmental conditions, size interface between the closure or enclosure and the fibre management system, optical performance, additional/special conditions and safety requirements 3.1.5 residual loss variation of the optical loss of the circuit before versus

45、 after an exposure 3.1.6 transient loss sudden variations of the optical loss in a circuits loss characteristics during: a) manipulation of the entire closure or enclosure and its fibre management system; b) access to adjacent circuits stored in the same closure or enclosure; c) sudden effects induc

46、ed by the external environment (e.g. vibration, shock) 3.2 Abbreviations FMS: Fibre Management System SC: Single Circuit SE: Single Element ME: Multiple Element MR: Multiple Ribbon 4 Environmental requirements Environmental requirements for products of fibre management systems shall be derived from

47、the requirements for the housings. 7 EN 61753-101-2:20065 Test procedure 5.1 General The mechanical and environmental performance of fibre management system parts is vital to the optical cabling system. The purpose of environmental testing is to demonstrate that the parts of a fibre management syste

48、m under defined environmental conditions can survive without irreversible or reversible failures and perform according to requirements. Performance testing is accomplished by subjecting the test specimen to a number of mechanical and environmental conditions. Any optical performance deviations are m

49、easured at prescribed intervals after completion of each test for stationary use, storage and transportation. The tests may have different severities and criteria. The test parameters, as well as requirements given in this specification, do not cover any mixture of subparts from different fibre management system product suppliers. In such cases the applicable conditions shall be agreed