EN 61753-131-3-2011 en Fibre optic interconnecting devices and passive components - Performance standard - Part 131-3 Single-mode mechanical fibre splice for category U - Uncontrol.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationFibre optic interconnecting devices and passive components Performance standardPart 131-3: Single-mode mechanical fibre splice for category U Uncontrolled environmentBS EN 61753-

2、131-3:2011National forewordThis British Standard is the UK implementation of EN 61753-131-3:2011. It is identical to IEC 61753-131-3:2010.The UK participation in its preparation was entrusted by Technical Committee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre optic interconnecting devices a

3、nd passive components.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011ISBN 978 0 580 59512 7 ICS 33.18

4、0.20Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2011.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 61753-131-3:2

5、011EUROPEAN STANDARD EN 61753-131-3 NORME EUROPENNE EUROPISCHE NORM March 2011 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2011

6、CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61753-131-3:2011 E ICS 33.180.20 English version Fibre optic interconnecting devices and passive components - Performance standard - Part 131-3: Single-mode mechanical fibre splice f

7、or category U - Uncontrolled environment (IEC 61753-131-3:2010) Dispositifs dinterconnexion et composants passifs fibres optiques - Norme de performance - Partie 131-3 : Epissure mcanique de fibres unimodales pour Catgorie U - Environnement non contrl (CEI 61753-131-3:2010) Lichtwellenleiter - Verbi

8、ndungselemente und passive Bauteile - Betriebsverhalten - Teil 131-3: Mechanische Spleie fr Einmoden-Lichtwellenleiter fr die Kategorie U - Unkontrollierte Umgebung (IEC 61753-131-3:2010) This European Standard was approved by CENELEC on 2011-01-02. CENELEC members are bound to comply with the CEN/C

9、ENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to an

10、y CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official ver

11、sions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portuga

12、l, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 61753-131-3:2011EN 61753-131-3:2011 - 2 - Foreword The text of document 86B/2945/FDIS, future edition 1 of IEC 61753-131-3, prepared by SC 86B, Fibre optic interconnecting devices and passive components, of IEC

13、TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61753-131-3 on 2011-01-02. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for ide

14、ntifying any or all such patent rights. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2011-10-02 latest date by which the national standards conflicting with the EN have to

15、be withdrawn (dow) 2014-01-02 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61753-131-3:2010 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added

16、for the standards indicated: IEC 60793-2-50:2008 NOTE Harmonized as EN 60793-2-50:2008 (not modified). IEC 61753-1 NOTE Harmonized as EN 61753-1. IEC 61300-2-46 NOTE Harmonized as EN 61300-2-46. IEC 62005 series NOTE Harmonized in EN 62005 series (not modified). _ BS EN 61753-131-3:2011- 3 - EN 6175

17、3-131-3:2011 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references,

18、 the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60721-3-2 - Classification of environmental condi

19、tions - Part 3: Classification of groups of environmental parameters and their severities - Section 2: Transportation EN 60721-3-2 - IEC 61073-1 - Fibre optic interconnecting devices and passive components - Mechanical splices and fusion splice protectors for optical fibres and cables - Part 1: Gene

20、ric specification EN 61073-1 - IEC 61300-1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance EN 61300-1 - IEC 61300-2-1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedur

21、es - Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-1 - IEC 61300-2-4 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention EN 61300-2-4 - IEC 61300-2-5 - Fibre optic interconnecting devices and passive com

22、ponents - Basic test and measurement procedures - Part 2-5: Tests - Torsion EN 61300-2-5 - IEC 61300-2-9 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock EN 61300-2-9 - IEC 61300-2-17 - Fibre optic interconnecting devices

23、and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold EN 61300-2-17 - IEC 61300-2-18 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance EN 61300-2-18 - BS E

24、N 61753-131-3:2011EN 61753-131-3:2011 - 4 - Publication Year Title EN/HD Year IEC 61300-2-22 - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature EN 61300-2-22 - IEC 61300-2-26 - Fibre optic interconnecting devices and passive components - Basic test and measurement pro

25、cedures - Part 2-26: Tests - Salt mist EN 61300-2-26 - IEC 61300-2-27 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-27: Tests - Dust - Laminar flow EN 61300-2-27 - IEC 61300-2-33 - Fibre optic interconnecting devices and passive compone

26、nts - Basic test and measurement procedures - Part 2-33: Tests - Assembly and disassembly of fibre optic closures EN 61300-2-33 - IEC 61300-3-3 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-3: Examinations and measurements - Active moni

27、toring of changes in attenuation and return loss EN 61300-3-3 - IEC 61300-3-4 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation EN 61300-3-4 - IEC 61300-3-6 - Fibre optic interconnecting device

28、s and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss EN 61300-3-6 - IEC 61300-3-7 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavel

29、ength dependence of attenuation and return loss of single mode components EN 61300-3-7 - IEC 61300-3-28 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinations and measurements - Transient loss EN 61300-3-28 - BS EN 61753-131-3:2

30、011 2 61753-131-3 IEC:2010(E) CONTENTS INTRODUCTION. 5 1 Scope.6 2 Normative references.6 3 General requirements 7 3.1 Storage, transportation and packaging . 7 3.2 Marking and identification .7 3.3 Materials .7 3.4 Test report.8 4 Test8 4.1 General . 8 4.2 Test sample preparation .8 4.3 Test and me

31、asurement methods . 8 4.4 Pass/fail criteria. 9 5 Performance requirements9 5.1 Sample size, sequencing and grouping . .9 5.2 Dimensions . .9 5.3 Installation yield requirement .9 5.4 Test details and requirements 9 Annex A (informative) Fibre type .16 Annex B (normative) Sample size and product sou

32、rcing requirements. 17 Bibliography . 18 Table 1 Test details and requirements 9 Table A.1 Fibre type characteristics. .16 Table B.1 Sample size per test . .17 BS EN 61753-131-3:201161753-131-3 IEC:2010(E) 5 INTRODUCTION This part of IEC 61753 for mechanical splices defines the requirements for stan

33、dard optical performance under a set of specified conditions. The standard contains a series or a set of tests and measurements with clearly stated conditions, severities and pass/fail criteria. The series of tests, commonly referred to as an operating service environment or performance category, is

34、 intended to be a basis to prove the products ability to satisfy the requirements of a specific application, market sector or user group. A product that has been shown to meet all the requirements of this performance standard may be declared as complying with this performance standard. Products havi

35、ng the same classification from one manufacturer that satisfy this performance standard, will operate within the boundaries set by the performance standard. There is no guarantee that products from different manufacturers, having the same classification and which conform to the same performance stan

36、dard, will provide an equivalent level of performance when they are used together. Conformance with IEC environmental policy according to IEC Guide 109 and concerning the need to reduce the impact on the natural environment of fibre management system products during all phases of their life from acq

37、uiring materials to manufacturing, distribution, use, and end-of-life treatment (i.e. re-use, recycling (recovery and disposal) are not part of this standard, but will be covered in the generic specification. Conformance to a performance standard demonstrates that a product has passed a design verif

38、ication test. It is not a guarantee of lifetime assured performance or reliability. Reliability testing are the subject of a separate test schedule, where the tests and severities selected are such that they are truly representative of the requirements of this reliability test programme. Consistency

39、 of manufacture should be maintained using a recognised Quality Assurance programme whilst the reliability of product should be evaluated using the procedures recommended in IEC 62005 series. Tests and measurements are selected from the IEC 61300 series. BS EN 61753-131-3:2011 6 61753-131-3 IEC:2010

40、(E) FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD Part 131-3: Single-mode mechanical fibre splice for category U Uncontrolled environment 1 Scope This part of IEC 61753 contains the minimum initial test and measurement requirements and severities which a mechanical

41、fibre splice will satisfy in order to be categorised as meeting the requirements of single-mode fibre splice for use in uncontrolled environments. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition

42、cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60721-3-2, Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Section 2: Transportation IEC 61073-1,

43、Fibre optic interconnecting devices and passive components Mechanical splices and fusion splice protectors for optical fibres and cables Part 1: Generic specification IEC 61300-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 1: General and gui

44、dance IEC 61300-2-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-1: Tests Vibration (sinusoidal) IEC 61300-2-4, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-4: Tests Fibre/cable ret

45、ention IEC 61300-2-5, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-5: Tests Torsion IEC 61300-2-9, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-9:Tests Shock IEC 61300-2-17, Fibre op

46、tic interconnecting devices and passive components Basic test and measurement procedures Part 2-17: Tests Cold IEC 61300-2-18, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-18: Tests Dry heat High temperature endurance IEC 61300-2-22, Fibre o

47、ptic interconnecting devices and passive components Basic test and measurement procedures Part 2-22: Tests Change of temperature IEC 61300-2-26, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-26: Tests Salt mist BS EN 61753-131-3:201161753-131

48、-3 IEC:2010(E) 7 IEC 61300-2-27, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-27: Tests Dust Laminar flow IEC 61300-2-33, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-33: Tests Assem

49、bly and disassembly of fibre optic closures IEC 61300-3-3, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-3: Examinations and measurements Active monitoring of changes in attenuation and return loss IEC 61300-3-4, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-26: Tests Salt mist IEC 61300-