EN 61753-141-2-2011 en Fibre optic interconnecting devices and passive components - Performance standard - Part 141-2 Fibre optic passive chromatic dispersion compensator using sin.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationFibre optic interconnecting devices and passive components Performance standardPart 141-2: Fibre optic passive chromatic dispersion compensator using single-mode dispersion compe

2、nsating fibre for category C Controlled environmentsBS EN 61753-141-2:2011National forewordThis British Standard is the UK implementation of EN 61753-141-2:2011. It is identical to IEC 61753-141-2:2011.The UK participation in its preparation was entrusted by Technical Committee GEL/86, Fibre optics,

3、 to Subcommittee GEL/86/2, Fibre optic interconnecting devices and passive components.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for i

4、ts correct application. BSI 2011ISBN 978 0 580 63062 0 ICS 33.180.20Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2011.Amendments issued since publicat

5、ionAmd. No. Date Text affectedBRITISH STANDARDBS EN 61753-141-2:2011EUROPEAN STANDARD EN 61753-141-2 NORME EUROPENNE EUROPISCHE NORM May 2011 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normu

6、ng Management Centre: Avenue Marnix 17, B - 1000 Brussels 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61753-141-2:2011 E ICS 33.180.20 English version Fibre optic interconnecting devices and passive components - Performan

7、ce standard - Part 141-2: Fibre optic passive chromatic dispersion compensator using single-mode dispersion compensating fibre for category C - Controlled environments (IEC 61753-141-2:2011) Dispositifs dinterconnexion et composantspassifs fibres optiques - Norme de performance - Partie 141-2: Compe

8、nsateur de dispersion chromatique passif fibres optiques utilisant une fibre compensation de dispersion unimodale pour la catgorie C -Environnements contrls (CEI 61753-141-2:2011) Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 141-2: Passiver chromatischer Di

9、spersionskompensator mit dispersionskompensierender Einmodenfaser fr die Kategorie C - Kontrollierte Umgebung (IEC 61753-141-2:2011) This European Standard was approved by CENELEC on 2011-05-25. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditi

10、ons for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in thre

11、e official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnica

12、l committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerl

13、and and the United Kingdom. BS EN 61753-141-2:2011EN 61753-141-2:2011 Foreword The text of document 86B/3162/FDIS, future edition 1 of IEC 61753-141-2, prepared by SC 86B, Fibre optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC paralle

14、l vote and was approved by CENELEC as EN 61753-141-2 on 2011-05-25. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates w

15、ere fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-02-25 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2014-05-25 Annex ZA has been added by CENE

16、LEC. _ Endorsement notice The text of the International Standard IEC 61753-141-2:2011 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: In the official version, for Biblio

17、graphy, the following notes have to be added for the standards indicated: IEC 61753-1 NOTE Harmonized as EN 61753-1. IEC 62074-1 NOTE Harmonized as EN 62074-1. _ BS EN 61753-141-2:2011EN 61753-141-2:2011 Annex ZA (normative) Normative references to international publications with their corresponding

18、 European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international

19、 publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60793-2-50 - Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres EN 60793-2-50 - IEC 61300-2-1 - Fibre

20、 optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-1 - IEC 61300-2-4 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable r

21、etention EN 61300-2-4 - IEC 61300-2-9 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock EN 61300-2-9 + AC:2011 - IEC 61300-2-17 - Fibre optic interconnecting devices and passive components - Basic test and measurement proce

22、dures - Part 2-17: Tests - Cold EN 61300-2-17 - IEC 61300-2-18 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance EN 61300-2-18 - IEC 61300-2-19 - Fibre optic interconnecting devices and pass

23、ive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state) EN 61300-2-19 - IEC 61300-2-22 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature EN 61300-2-22 - IEC 6130

24、0-2-42 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for connectors EN 61300-2-42 - IEC 61300-2-44 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part

25、2-44: Tests - Flexing of the strain relief of fibre optic devices EN 61300-2-44 - BS EN 61753-141-2:2011EN 61753-141-2:2011 Publication Year Title EN/HD Year IEC 61300-3-2 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examinations an

26、d measurements - Polarization dependent loss in a single-mode fibre optic device EN 61300-3-2 - IEC 61300-3-4 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation EN 61300-3-4 - IEC 61300-3-7 - Fi

27、bre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components FprEN 61300-3-71)- IEC 61300-3-32 - Fibre optic interconnecting devices and pass

28、ive components - Basic test and measurement procedures - Part 3-32: Examinations and measurements - Polarisation mode dispersion measurement for passive optical components EN 61300-3-32 - IEC/PAS 61300-3-38 - Fibre optic interconnecting devices and passive components - Basic test and measurement pro

29、cedures - Part 3-38: Group delay and chromatic dispersion - - IEC 61753-021-2 - Fibre optic interconnecting devices and passive components performance standard - Part 021-2: Grade C/3 single-mode fibre optic connectors for category C - Controlled environment EN 61753-021-2 - IEC 61978-1 - Fibre opti

30、c interconnecting devices and passive components - Fibre optic passive chromatic dispersion compensators - Part 1: Generic specification EN 61978-1 - ITU-T Recommendation G.Sup39 - Optical system design and engineering considerations - - 1)At draft stage. BS EN 61753-141-2:201161753-141-2 IEC:2011 C

31、ONTENTS 1 Scope . . 5 2 Normative references . 5 3 Terms and definitions . 6 4 Test 7 5 Test report. . 7 6 Performance requirements . . 7 6.1 Reference components . 7 6.2 Dimensions 7 6.3 Test details and requirements . . 7 Annex A (normative) Sample size . . 14 Bibliography . 15 Table 1 Test and re

32、quirements for single channel application . 8 Table 2 Test and requirements for C-band WDM application . 9 Table 3 Test and requirements for L-band WDM application . 10 Table 4 Test and requirements for all applications 11 Table A.1 Sample size for the tests in Table 1 . 14 Table A.2 Sample size for

33、 the tests in Table 2 . 14 BS EN 61753-141-2:201161753-141-2 IEC:2011 5 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD Part 141-2: Fibre optic passive chromatic dispersion compensator using single-mode dispersion compensating fibre for category C Controlled environme

34、nts 1 Scope This part of IEC 61753 contains the minimum test and measurement requirements and severity levels that a fibre optic passive chromatic dispersion compensator (PCDC) using single-mode dispersion compensating fibre (DCF) must satisfy in order to be categorised as meeting the IEC standard,

35、Category C Controlled Environments. Generally, PCDCs are used to reduce the magnitude of chromatic dispersion (CD) between regenerators by adding CD to the span that has a sign opposite to the total CD of the cabled fibre and components. The requirements cover non-connectorised PCDCs with single-mod

36、e fibre at both ends used in single-channel transmission and wavelength division multiplexing (WDM) transmission in single mode fibres (SMF) (IEC60793-2-50, B1/B2/B4). 2 Normative references The following referenced documents are indispensable for the application of this document. For dated referenc

37、es, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60793-2-50: Optical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres IEC 61300-2-1, Fibre optic interconnec

38、ting devices and passive components Basic test and measurement procedures Part 2-1: Tests Vibration (sinusoidal) IEC 61300-2-4, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-4: Tests Fibre/cable retention IEC 61300-2-9, Fibre optic interconne

39、cting devices and passive components Basic test and measurement procedures Part 2-9: Tests Shock IEC 61300-2-17, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-17: Tests Cold IEC 61300-2-18, Fibre optic interconnecting devices and passive comp

40、onents Basic test and measurement procedures Part 2-18: Tests Dry heat High temperature endurance IEC 61300-2-19, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-19: Tests Damp heat (steady state) IEC 61300-2-22, Fibre optic interconnecting dev

41、ices and passive components Basic test and measurement procedures Part 2-22: Tests Change of temperature IEC 61300-2-42, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-42: Tests Static side load for connectors BS EN 61753-141-2:2011 6 61753-14

42、1-2 IEC:2011 IEC 61300-2-44, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-44: Tests Flexing of the strain relief of fibre optic devices IEC 61300-3-2, Fibre optic interconnecting devices and passive components Basic test and measurement proc

43、edures Part 3-2: Examination and measurements Polarization dependent loss in a single-mode fibre optic device IEC 61300-3-4, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-4: Examinations and measurements Attenuation IEC 61300-3-7, Fibre optic

44、 interconnecting devices and passive components Basic test and measurement procedures Part 3-7: Examinations and measurements Wavelength dependence of attenuation and return loss of single mode components IEC 61300-3-32, Fibre optic interconnecting devices and passive components Basic test and measu

45、rement procedures Part 3-32: Examinations and measurements Polarization mode dispersion measurement for passive optical components IEC/PAS 61300-3-38, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-38: Examinations and measurements Group delay

46、 and chromatic dispersion IEC 61753-021-2, Fibre optic interconnecting devices and passive components Part 021-2: Grade C/3 single-mode fibre optic connectors for category C Controlled environment IEC 61978-1, Fibre optic interconnecting devices and passive components Fibre optic passive dispersion

47、compensators Part 1: Generic specification ITU-T Recommendation G.Sup39, Optical system design and engineering considerations 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 chromatic dispersion CD derivative of group delay with respect to wa

48、velength or frequency. A typical unit is ps/nm or ps/GHz. The chromatic dispersion generally varies with the operating wavelength 3.2 polarisation dependent loss PDL the maximum variation of insertion loss due to a variation of the state of polarization (SOP) over all the SOPs 3.3 wavelength depende

49、nt loss WDL the maximum variation of the insertion loss over operating wavelength range 3.4 polarisation mode dispersion PMD the change in the shape and width of the pulse due to the average delay of the travelling time between the two principal states of polarization (PSP), differential group delay (DGD), and/or BS EN 61753-141-2:201161753-141-2 IEC:2011 7 to the waveform distortion for each