EN 61753-143-2-2013 en Fibre optic interconnecting devices and passive components - Performance standard - Part 143-2 Optical passive VIPA-based dispersion compensator of single-mo.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationFibre optic interconnectingdevices and passive components Performance standardPart 143-2: Optical passive VIPA-based dispersion compensator of single-mode fibre transmission for

2、category C Controlled environmentsBS EN 61753-143-2:2013National forewordThis British Standard is the UK implementation of EN 61753-143-2:2013. It isidentical to IEC 61753-143-2:2012.The UK participation in its preparation was entrusted by Technical CommitteeGEL/86, Fibre optics, to Subcommittee GEL

3、/86/2, Fibre optic interconnectingdevices and passive components.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application.

4、 The British Standards Institution 2013Published by BSI Standards Limited 2013ISBN 978 0 580 69514 8ICS 33.180.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 28

5、 February 2013.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 61753-143-2:2013EUROPEAN STANDARD EN 61753-143-2 NORME EUROPENNE EUROPISCHE NORM February 2013 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotech

6、nique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61753-143-2:2013 E ICS 33.180.20 English version Fibre optic interc

7、onnecting devices and passive components - Performance standard - Part 143-2: Optical passive VIPA-based dispersion compensator of single-mode fibre transmission for category C - Controlled environment (IEC 61753-143-2:2012) Dispositifs dinterconnexion et composants passifs fibres optiques - Norme d

8、e performance - Partie 143-2: Compensateur de dispersion reposant sur le VIPA passif optique de transmission par fibre unimodale pour la catgorie C - Environnement contrl (CEI 61753-143-2:2012) Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 143-2: VIPA-basier

9、ender passiver optischer Dispersionskompensator fr Einmodenfaserbertragung fr die Kategorie C - Kontrollierte Umgebung (IEC 61753-143-2:2012) This European Standard was approved by CENELEC on 2012-12-20. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate th

10、e conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Stan

11、dard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are

12、 the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Po

13、land, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 61753-143-2:2013EN 61753-143-2:2013 - 2 - Foreword The text of document 86B/3491/FDIS, future edition 1 of IEC 61753-143-2, prepared by SC 86B, “Fibre optic interconnecting devices and passi

14、ve components“, of IEC TC 86, “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-143-2:2013. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by

15、endorsement (dop) 2013-09-20 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-12-20 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held resp

16、onsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61753-143-2:2012 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standar

17、d indicated: IEC 61978-1 NOTE Harmonized as EN 61978-1. BS EN 61753-143-2:2013- 3 - EN 61753-143-2:2013 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in t

18、his document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, in

19、dicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60793-1 Series Optical fibres - Part 1: Measurement methods and test procedures EN 60793-1 Series IEC 60793-2-50 - Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode

20、fibres EN 60793-2-50 - IEC 61300 Series Fibre optic interconnecting devices and passive components - Basic test and measurement procedures EN 61300 Series IEC 61300-2-1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration

21、(sinusoidal) EN 61300-2-1 - IEC 61300-2-4 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention EN 61300-2-4 - IEC 61300-2-9 - Fibre optic interconnecting devices and passive components - Basic test and measurem

22、ent procedures - Part 2-9: Tests - Shock EN 61300-2-9 - IEC 61300-2-17 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold EN 61300-2-17 - IEC 61300-2-18 - Fibre optic interconnecting devices and passive components - Basic te

23、st and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance EN 61300-2-18 - IEC 61300-2-19 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state) EN 61300-2-19 - IEC 61300-2-22 -

24、Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature EN 61300-2-22 - BS EN 61753-143-2:2013EN 61753-143-2:2013 - 4 - IEC 61300-2-42 - Fibre optic interconnecting devices and passive components - Basic test and m

25、easurement procedures - Part 2-42: Tests - Static side load for connectors EN 61300-2-42 - IEC 61300-2-44 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices EN 61300-2-44 - IEC

26、61300-3-2 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examinations and measurements - Polarization dependent loss in a single-mode fibre optic device EN 61300-3-2 - IEC 61300-3-4 - Fibre optic interconnecting devices and passive co

27、mponents - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation EN 61300-3-4 - IEC 61300-3-7 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence

28、 of attenuation and return loss of single mode components EN 61300-3-7 - IEC 61300-3-32 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-32: Examinations and measurements - Polarisation mode dispersion measurement for passive optical compo

29、nents EN 61300-3-32 - IEC 61300-3-38 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-38:Examinations and measurements - Group delay, chromatic dispersion and phase ripple EN 61300-3-38 - IEC 61753-1 - Fibre optic interconnecting devices a

30、nd passive components performance standard - Part 1: General and guidance for performance standards EN 61753-1 - IEC 62074-1 - Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification EN 62074-1 - BS EN 61753-143-2:2013 2 61753-143-2 IEC:20

31、12 CONTENTS INTRODUCTION . 5 1 Scope . 6 2 Normative references . 6 3 Terms, definitions and abbreviations 7 4 Test 8 5 Test report 8 6 Performance requirements . 8 6.1 Reference components 8 6.2 Dimensions . 9 6.3 Sample size 9 6.4 Test details and requirements . 9 Annex A (normative) Sample size .

32、 17 Annex B (informative) Virtually imaged phased array (VIPA) Technology 18 Bibliography 20 Figure B.1 Structure of virtually imaged phased array (VIPA) . 18 Figure B.2 Detailed light path and mechanism of generating chromatic dispersion . 19 Table 1 Test and requirements for C-band and L-band WDM

33、application . 10 Table 2 Test and requirements for C-band WDM application . 11 Table 3 Test and requirements for L-band WDM application 12 Table 4 Common test and requirements . 13 Table A.1 Sample size . 17 BS EN 61753-143-2:201361753-143-2 IEC:2012 5 INTRODUCTION The International Electrotechnical

34、 Commission (IEC) draws attention to the fact that it is claimed that compliance with this document may involve the use of a patent concerning the optical dispersion compensator given in Clauses 1 to 6. IEC takes no position concerning the evidence, validity and scope of this patent right. The holde

35、r of this patent right has assured the IEC that he/she is willing to negotiate licences either free of charge or under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with IEC

36、. Information may be obtained from: Fujitsu Limited Standards Center, Intellectual property unit 1-1, Kamikodanaka 4-chome, Nakahara-ku, Kawasaki-shi, Kanagawa 211-8588 Japan Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other th

37、an those identified above. IEC shall not be held responsible for identifying any or all such patent rights. IEC (http:/patents.iec.ch) maintains on-line databases of patents relevant to their standards. Users are encouraged to consult the databases for the most up to date information concerning pate

38、nts. BS EN 61753-143-2:2013 6 61753-143-2 IEC:2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD Part 143-2: Optical passive VIPA-based dispersion compensator of single-mode fibre transmission for category C Controlled environment 1 Scope This part of IEC 61753 cont

39、ains the minimum test and measurement requirements and severity levels that a passive chromatic dispersion compensator (PCDC) using virtually imaged phased array (VIPA) must satisfy in order to be categorized as meeting the IEC standard, category C-controlled environments. Generally, PCDCs are used

40、to reduce the magnitude of chromatic dispersion (CD) between regenerators by adding CD to the span that has a sign opposite to the total CD of the fibre cable and components. The requirements cover non-connectorized PCDCs used in single-channel transmission and wavelength division multiplexing (WDM)

41、 transmission in single-mode fibres (IEC 60793-2-50 B1/B2/B4). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the

42、 latest edition of the referenced document (including any amendments) applies. IEC 60793-1 (all parts), Optical fibres Measurement methods and test procedures IEC 60793-2-50, Optical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres IEC 61300 (all parts)

43、, Fibre optic interconnecting devices and passive components Basic test and measurement procedures IEC 61300-2-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-1: Tests Vibration (sinusoidal) IEC 61300-2-4, Fibre optic interconnecting devices

44、 and passive components Basic test and measurement procedures Part 2-4: Tests Fibre/cable retention IEC 61300-2-9, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-9: Tests Shock IEC 61300-2-17, Fibre optic interconnecting devices and passive co

45、mponents Basic test and measurement procedures Part 2-17: Tests Cold IEC 61300-2-18, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-18: Tests Dry heat High temperature endurance BS EN 61753-143-2:201361753-143-2 IEC:2012 7 IEC 61300-2-19, Fibr

46、e optic interconnecting devices and passive components Basic test and measurement procedures Part 2-19: Tests Damp heat (steady state) IEC 61300-2-22, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-22: Tests Change of temperature IEC 61300-2-4

47、2, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-42: Tests Static side load for connectors IEC 61300-2-44, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-44: Tests Flexing of the strain

48、 relief of fibre optic devices IEC 61300-3-2, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-2: Examination and measurements Polarization dependent loss in a single-mode fibre optic device IEC 61300-3-4, Fibre optic interconnecting devices and

49、 passive components Basic test and measurement procedures Part 3-4: Examinations and measurements Attenuation IEC 61300-3-7, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-7: Examinations and measurements Wavelength dependence of attenuation and return loss of single mode components IEC 61300-3-32, Fibre optic interconnecting devices and passive components Basic