EN 61753-2-3-2001 en Fibre Optic Interconnecting Devices and Passive Components Performance Standard - Part 2-3 Non-Connectorised Single Mode 1xN and 2xN Non-Wavelength-Selective B.pdf

1、BRITISH STANDARD Fibre optic interconnecting i o i o devices and passive components performance standard Part 2-3 : Non-connectorised single mode 1xN and 2xN non-wavelength-selective branching devices for Category U - Uncontrolled environment The European Standard EN 61753-2-3:2001 has the status of

2、 a British Standard ICs 33.180.20 BS EN IEC 61753-2-312001 61753-2-312001 Wk present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in

3、the UK. - A list of organizations represented on this subcommittee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For instance, IEC 27-1 has been renumbered as IEC 60027-1. For a period oftime during the change ov

4、er from one numbering system to the other, publications may contain identifiers from both systems. Cr oss-r e fer enc e s The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “

5、International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance wi

6、th a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 18, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when th

7、e document was last issued. O BSI 28 November 200 1 ISBN O 580 38709 7 EUROPEAN STANDARD EN 61753-2-3 NORME EUROPENNE EUROPISCHE NORM November 2001 ICs 33.180.20 English version Fibre optic interconnecting devices and passive components performance standard Part 2-3: Non-connectorised single mode Ix

8、N and 2xN non-wavelength-selective branching devices for Category U - Uncontrolled environment (IEC 61 753-2-312001) Norme de qualit de fonctionnement des dispositifs dinterconnexion et composants passifs fibres optiques Partie 2-3: Dispositifs de couplage non-connectoriss monomodes IxN et 2xN ne dp

9、endant pas de la longueur donde pour catgorie U - Environnement non contrl (CE1 61 753-2-312001) Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten Teil 2-3: Nicht steckbare we1 len lngen u nab hngige E in moden- 1 xN- und -2xN-Verzweiger fr die Kategorie U - U n kon tr

10、ol I ierte U mge bu ng (IEC 61753-2-312001) This European Standard was approved by CENELEC on 2001-10-01. CENELEC members are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any altera

11、tion. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by tra

12、nslation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greec

13、e, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secret

14、ariat: rue de Stassart 35, B - 1050 Brussels O 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61753-2-3:2001 E Page 2 EN 61753-2-32001 Foreword The text of document 86B/1509/FDIS, future edition 1 of IEC 61753-2-3, prepared

15、by SC 86B, Fibre optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61753-2-3 on 2001-10-01. The following dates were fixed: - latest date by which the EN has to be implemented at national

16、 level by publication of an identical national standard or by endorsement (dop) 2002-07-01 - latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2004-1 0-01 Annexes designated “normative“ are part of the body of the standard. Annexes designated “informative

17、“ are given for information only. In this standard, annexes B and ZA are normative and annex A is informative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard IEC 61753-2-3:2001 was approved by CENELEC as a European Standard without any modification. O B

18、SI 28 November 2001 Page 3 EN 61753-2-32001 CONTENTS Scope 4 Normative references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Test . 5 Test repo

19、rt . 6 Performance requirements 6 5.1 Sample size, sequencing and grouping 6 5.2 Test details and requirements 6 Annex A (informative) Examples of attenuation requirements of 1 xN and 2xN branching devices . 14 Annex B (normative) Sample size, sequencing and grouping 16 Annex ZA (normative) Normativ

20、e references to international publications with their corresponding European publications 17 Table A.l - Attenuation requirements common port configurations for Class 1 application 14 Table A.2 - Attenuation requirements of 1 x2 and 2x2 unbalanced branching devices having the most common port config

21、urations for Class 1 application. . 14 Table A.3 - Attenuation requirements of balanced branching devices having the most common port configurations for Class 2 application . 15 Table A.4 - Attenuation requirements of balanced branching devices having the most common port configurations for Class 3

22、application . 15 Table B.l - Sample size and sequencing and grouping of tests 16 O BSI 28 November 2001 Page 4 EN 61753-2-32001 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - Part 2-3: Non-connectorised single-mode 1 xN and 2xN non-wavelength- selective branching d

23、evices for Category U - Uncontrolled environment 1 Scope This part of IEC 61753 contains the minimum initialisation test and measurement require- ments and severities which a branching device shall satisfy in order to be categorised as meeting the IEC standard. The requirements cover balanced non-co

24、nnectorised single-mode IxN and 2xN non-wavelength-selective branching devices for use in an IEC Category U environment (N is the number of output ports). The specifications of unbalanced branching devices are limited to 1 x2 and 2x2 devices because they are the most commonly used. 2 Normative refer

25、ences The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of IEC 61753. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this par

26、t of IEC 61753 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of IS0 and IEC maintain registers of currently valid Interna

27、tional Standards. IEC 60793-1 -1 : 1995, Opfical fibres - Parf 1: Generic specificafion - Secfion 1: General IEC 61 300 (all parts), Fibre opfic inferconnecfing devices and passive componenfs - Basic fesf and measuremenf procedures IEC 61300-2-1 :I 995, Fibre opfic inferconnecfing devices and passiv

28、e componenfs - Basic fesf and measuremenf procedures - Parf 2-1: Tesfs - Vibrafion (sinusoidal) IEC 61 300-2-4:1995, Fibre opfic inferconnecfing devices and passive componenfs - Basic fesf and measuremenf procedures - Parf 2-4: Tesfs - Fibrelcable refenfion IEC 61 300-2-5:1995, Fibre opfic inferconn

29、ecfing devices and passive componenfs - Basic fesf and measuremenf procedures - Parf 2-5: Tesfs - Torsionlfwisf IEC 61 300-2-1 2:1995, Fibre opfic inferconnecfing devices and passive componenfs - Basic fesf and measuremenf procedures - Parf 2-12: Tesfs - Impacf IEC 61 300-2-14:1997, Fibre opfic infe

30、rconnecfing devices and passive componenfs - Basic fesf and measuremenf procedures - Parf 2-14: Tesfs - Maximum inpuf power IEC 61 300-2-1 7:1995, Fibre opfic inferconnecfing devices and passive componenfs - Basic fesf and measuremenf procedures - Parf 2-17: Tesfs - Cold IEC 61 300-2-1 8:1995, Fibre

31、 opfic inferconnecfing devices and passive componenfs - Basic fesf and measuremenf procedures - Parf 2-18: Tesfs - Dry heaf - High femperafure endurance IEC 61 300-2-1 9:1995, Fibre opfic inferconnecfing devices and passive componenfs - Basic fesf and measuremenf procedures - Parf 2-19: Tesfs - Damp

32、 heaf (sfeady sfafe) O BSI 28 November 2001 Page 5 EN 61753-2-32001 IEC 61 300-2-22:1995, Fibre opfic inferconnecfing devices and passive componenfs - Basic fesf and measuremenf procedures - Parf 2-22: Tesfs - Change of femperafure IEC 61 300-2-26:1995, Fibre opfic inferconnecfing devices and passiv

33、e componenfs - Basic fesf and measuremenf procedures - Parf 2-26: Tesfs - Salf misf IEC 61 300-2-27:1995, Fibre opfic inferconnecfing devices and passive componenfs - Basic fesf and measuremenf procedures - Parf 2-27: Tesfs - Dusf - Laminar flow IEC 61 300-2-28:1995, Fibre opfic inferconnecfing devi

34、ces and passive componenfs - Basic fesf and measuremenf procedures - Parf 2-28: Tesfs - Indusfrial afmosphere (sulphur dioxide) IEC 61 300-2-45:1999, Fibre opfic inferconnecfing devices and passive componenfs - Basic fesf and measuremenf procedures - Parf 2-45: Tesfs - Durabilify fesf by wafer immer

35、sion IEC 61 300-3-2:1999, Fibre opfic inferconnecfing devices and passive componenfs - Basic fesf and measuremenf procedures - Parf 3-2: Examinafions and measuremenfs - Polarizafion dependence of affenuafion in a single-mode fibre opfic device IEC 61 300-3-3:1997, Fibre opfic inferconnecfing devices

36、 and passive componenfs - Basic fesf and measuremenf procedures - Parf 3-3: Examinafions and measuremenfs - Moniforing change in affenuafion and in refurn loss (mulfiple pafhs) IEC 61 300-3-5:2001, Fibre opfic inferconnecfing devices and passive componenfs - Basic fesf and measuremenf procedures - P

37、arf 3-5: Examinafions and measuremenfs - Wavelengfh dependence of affenuafion IEC 61 300-3-6:1997, Fibre opfic inferconnecfing devices and passive componenfs - Basic fesf and measuremenf procedures - Parf 3-6: Examinafions and measuremenfs - Refurn loss IEC 61 300-3-20:2001, Fibre opfic inferconnecf

38、ing devices and passive componenfs - Basic fesf and measuremenf procedures - Parf 3-20: Examinafions and measuremenfs - Direcfivify of fibre opfic branching devices IEC 61 753-2-1 :2000, Fibre opfic inferconnecfing devices and passive componenfs performance sfandard - Parf 2-1: Fibre opfic connecfor

39、s ferminafed on single-mode fibre for cafegory U - Unconfrolled environmenf 3 Test All test methods are in accordance with the IEC 61300 series of standards. The samples shall be terminated onto single-mode fibres according to Type B1.l of IEC 60793-1-1 in either coated fibres (primary and secondary

40、) or reinforced cable format. Each test defines the number of samples to be evaluated. All tests shall be carried out to validate performance over the optical passbands of 1 260 nm to 1 360 nm and 1 480 nm to 1 580 nm. This is the minimum requirement for devices corres- ponding to Class 1 as describ

41、ed in 5.2. Extensions to these windows are covered by classes 2 and 3. Class 2 specifies additional attenuation limits for 1 450 nm to 1 480 nm and 1 580 nm to 1 600 nm. Class 3 devices shall meet Class 2 requirements and additionally have defined attenuation limits for 1 600 nm to 1 650 nm. O BSI 2

42、8 November 2001 Page 6 EN 61753-2-32001 4 Test report Fully documented test reports and supporting evidence shall be prepared and be available for inspection as evidence that the tests have been carried out and complied with. 5 Performan ce require men ts 5.1 Sample size, sequencing and grouping Sam

43、ple sizes for the tests are defined in annex B of this document. Test groups and test sequences shall be performed individually or in sequential order as shown in annex B. When testing in sequential order, the test sequence shown in annex B shall be followed 5.2 Test details and requirements Attenua

44、tion and return loss performances are given only for non-connectorised branching devices. For connectorised components the connector performances shall be in compliance with IEC 61753-2-1. During the environmental tests where monitoring of the branching device is needed, all ports of the device shal

45、l be controlled. O BSI 28 November 2001 Page 7 EN 61753-2-32001 Tests Attenuation Three classes of requirements have been identified for attenuation requirements: 1) Class 1 for standard and obligatory requirements for telecom operation in 1 260 nm - 1 360 nm and 1 480 nm - 1 580 nm bands (attenuati

46、on requirements in Eq. 1 for balanced devices and in Eq. 1 for unbalanced devices) 2) Class 2 for extended wavelength operation over a pass-band of 150 nm around the 1 550 nm optical window (attenuation requirements in Eq. 1 and Eq. 2 si m u I ta n eo u s I y) 3) Class 3 for further extended band-pa

47、ss between 1 600 nm and 1 650 nm for maintenance operati on (attenuation requirements in Eq. 1, Eq. 2 and Eq. 3 si m u I ta n eo u s I y) Directivity Requirements The attenuation requirements of IxN and 2xN balanced branching devices are given for each Class in Eq. 1, 2 and 3, while the attenuation

48、requirements of 1 x2 and 2x2 unbalanced branching devices are expressed in Eq I, only for Class 1. Eq. 1 (pass-band 1 260 nm to 1 360 nm and 1 480 nm to 1 580 nm) 1 xN 2xN A max. (dB) 0,6 + 3,6 x logzN 0,9 + 3,6 x logzN A min. (dB) 2,7 x logzN 2,7 x IogzN - 0,l (See also table A.l of annex A) Eq. 1

49、where P % is the nominal percentage of the power associated with one port (See also table A.2 of annex A) A max. (dB) = 25,5 - 12,5 loglo (P %) Eq. 2 (pass-band 1 450 nm to 1 480 nm and 1 580 nm to 1 600 nm) 1 xN 2xN A max. (dB) 0,6 + 3,7 x logzN A min. (dB) 2,5 x logzN + 0,l (See also table A.3 of annex A) 0,9 + 3,7 x logzN 2,5 x logzN Eq. 3 (pass-band 1 600 nm to 1 650 nm) 1 xN 2xN A max. (dB) 0,6 + 3,9 x logzN 0,9 + 3,9 x logzN A min. (dB) 2,4 x logzN- 0,l 2,4 x logzN- 0,2 (See also table A.4 of annex A) 235 dB Class T 245 dB Class U 255 dB Class V over the op