EN 61753-381-6-2016 en Fibre optic interconnecting devices and passive components - Performance standard - Part 381-6 Cyclic arrayed waveguide grating - Category O (uncontrolled en.pdf

1、BSI Standards PublicationFibre optic interconnecting devices and passive components Performance standardPart 381-6: Cyclic arrayed waveguide grating Category O (uncontrolled environment)BS EN 61753-381-6:2016National forewordThis British Standard is the UK implementation of EN 61753-381-6:2016. The

2、UK participation in its preparation was entrusted by TechnicalCommittee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre opticinterconnecting devices and passive components.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not

3、 purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 83423 3ICS 33.180.20Compliance with a British Standard cannot confer immunity fromlegal oblig

4、ations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 May 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61753-381-6:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61753-381-6 April 201

5、6 ICS 33.180.20 English Version Fibre optic interconnecting devices and passive components - Performance standard - Part 381-6: Cyclic arrayed waveguide grating - Category O (uncontrolled environment) (IEC 61753-381-6:2016) Dispositifs dinterconnexion et composants passifs fibres optiques - Norme de

6、 performance - Partie 381-6: Rseau slectif planaire cyclique - Catgorie O (environnement non contrl) (IEC 61753-381-6:2016) Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 381-6: Zyklisches Array-Wellenleitergitter fr die Kategorie O - Unkontrollierte Umgebung

7、 (IEC 61753-381-6:2016) This European Standard was approved by CENELEC on 2016-02-09. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date li

8、sts and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

9、under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark,

10、 Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Commi

11、ttee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENE

12、LEC Members. Ref. No. EN 61753-381-6:2016 E BS EN 61753-381-6:2016EN 61753-381-6:2016 2 European foreword The text of document 86B/3955/FDIS, future edition 1 of IEC 61753-381-6, prepared by SC 86B “Fibre optic interconnecting devices and passive components” of IEC/TC 86 “Fibre optics“ was submitted

13、 to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-381-6:2016. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-11-09 latest date by which the nati

14、onal standards conflicting with the document have to be withdrawn (dow) 2019-02-09 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. End

15、orsement notice The text of the International Standard IEC 61753-381-6:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61300 Series NOTE Harmonized as EN 613

16、00 Series. IEC 61300-2-17 NOTE Harmonized as EN 61300-2-17. IEC 61300-2-18 NOTE Harmonized as EN 61300-2-18. IEC 61753-081-2 NOTE Harmonized as EN 61753-081-2. IEC 61753-1 NOTE Harmonized as EN 61753-1. BS EN 61753-381-6:2016EN 61753-381-6:2016 3 Annex ZA (normative) Normative references to internat

17、ional publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of t

18、he referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is availa

19、ble here: www.cenelec.eu Publication Year Title EN/HD Year IEC 61300-2-1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-1 - IEC 61300-2-4 - Fibre optic interconnecting devices and passive comp

20、onents - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention - - IEC 61300-2-5 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion EN 61300-2-5 - IEC 61300-2-9 - Fibre optic interconnecting devic

21、es and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock EN 61300-2-9 - IEC 61300-2-14 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - High optical power EN 61300-2-14 - IEC 61300-2-19 - Fibr

22、e optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state) EN 61300-2-19 - IEC 61300-2-22 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change

23、 of temperature EN 61300-2-22 - IEC 61300-2-42 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for strain relief EN 61300-2-42 - BS EN 61753-381-6:2016EN 61753-381-6:2016 4 Publication Year Title EN/HD Year IE

24、C 61300-2-44 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices EN 61300-2-44 - IEC 61300-2-48 - Fibre optic interconnecting devices and passive components - Basic test and meas

25、urement procedures - Part 2-48: Tests - Temperature-humidity cycling EN 61300-2-48 - IEC 61300-3-2 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examination and measurements - Polarization dependent loss in a single-mode fibre optic

26、device EN 61300-3-2 - IEC 61300-3-6 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss EN 61300-3-6 - IEC 61300-3-20 - Fibre optic interconnecting devices and passive components - Basic test and

27、 measurement procedures - Part 3-20: Examinations and measurements - Directivity of fibre optic branching devices EN 61300-3-20 - IEC 61300-3-29 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Spectral

28、transfer characteristics of DWDM devices EN 61300-3-29 - IEC 61300-3-32 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-32: Examinations and measurements - Polarisation mode dispersion measurement for passive optical components EN 61300-3

29、-32 - IEC 61300-3-38 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-38:Examinations and measurements - Group delay, chromatic dispersion and phase ripple EN 61300-3-38 - IEC 61753-021-6 - Fibre optic interconnecting devices and passive c

30、omponents performance standard - Part 021-6: Grade B/2 single-mode fibre optic connectors for category O - Uncontrolled environment EN 61753-021-6 - BS EN 61753-381-6:2016EN 61753-381-6:2016 5 Publication Year Title EN/HD Year IEC 62074-1 - Fibre optic interconnecting devices and passive components

31、- Fibre optic WDM devices - Part 1: Generic specification EN 62074-1 - ITU-T Recommendation G.692 - Optical interfaces for multichannel systems with optical amplifiers - - ITU-T Recommendation G.694.1 - Spectral grids for WDM applications: DWDM frequency grid - - ITU-T Recommendation G.698.3 - Multi

32、channel seeded DWDM applications with single-channel optical interfaces - - BS EN 61753-381-6:2016 2 IEC 61753-381-6:2016 IEC 2016 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Terms and definitions 6 4 Test conditions 7 5 Test report . 8 6 Reference components 8 7 Performance requireme

33、nts. 8 7.1 Dimensions . 8 7.2 Test details and requirements . 8 Annex A (normative) Sequencing and grouping of tests . 15 Annex B (informative) General information on cyclic AWGs . 16 Annex C (informative) Channel frequency range and free spectral range . 18 Annex D (informative) Summary of differen

34、ces between IEC 61753-081-2 and IEC 61753-381-6 19 Bibliography 20 Figure 1 Illustration of cyclic AWGs 7 Figure B.1 Single bidirectional transmission with cyclic AWGs . 16 Figure B.2 Reference diagram of ITU-T G.698.3 17 Figure C.1 Description of channel frequency range and free spectral range . 18

35、 Table 1 Tests and requirements of optical performance parameters . 9 Table 2 Environmental tests any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also partic

36、ipate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an

37、international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all r

38、easonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply

39、 IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of co

40、nformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publi

41、cation. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect,

42、or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the corr

43、ect application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61753-381-6 has been prepar

44、ed by subcommittee 86B: Fibre optic interconnecting devices and passive components, of IEC technical committee 86: Fibre optics. The text of this standard is based on the following documents: FDIS Report on voting 86B/3955/FDIS 86B/3970/RVD Full information on the voting for the approval of this sta

45、ndard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. BS EN 61753-381-6:2016 4 IEC 61753-381-6:2016 IEC 2016 A list of all parts in the IEC 61753 series, published under the general title Fibre op

46、tic interconnecting devices and passive components Performance standard, can be found on the IEC website. Future standards in this series will carry the new general title as cited above. Titles of existing standards in this series will be updated at the time of the next edition. The committee has de

47、cided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amend

48、ed. BS EN 61753-381-6:2016IEC 61753-381-6:2016 IEC 2016 5 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD Part 381-6: Cyclic arrayed waveguide grating Category O (uncontrolled environment) 1 Scope This part of IEC 61753 contains the minimum initial test and measuremen

49、t requirements and severities which a Gaussian-passband-profile cyclic arrayed waveguide grating (AWG) for single bidirectional transmission systems satisfies in order to be categorised as meeting the requirements of IEC 61753-1 for category O (uncontrolled environment). This standard pertains to wavelength division multiplexing (WDM) network with multiple spectral-band usage. This standard covers the requirements of cyclic AWG devices with free spectral range (FSR) cha