EN 61753-382-2-2016 en Fibre optic interconnecting devices and passive components - Performance standard - Part 382-2 Non-connectorized singlemode bidirectional G-PON-NGA WWDM devi.pdf

1、BSI Standards PublicationFibre optic interconnecting devices and passive components Performance standardPart 382-2: Non-connectorized single-mode bidirectional G-PON-NGA WWDM devices for category C Controlled environmentBS EN 61753-382-2:2016National forewordThis British Standard is the UK implement

2、ation of EN 61753-382-2:2016.It is identical to IEC 61753-382-2:2015.The UK participation in its preparation was entrusted by TechnicalCommittee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre opticinterconnecting devices and passive components.A list of organizations represented on this commi

3、ttee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 85387 6ICS 33.180.20

4、Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 March 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61753-382-2:201

5、6EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61753-382-2 February 2016 ICS 33.180.20 English Version Fibre optic interconnecting devices and passive components - Performance standard - Part 382-2: Non-connectorized single-mode bidirectional G-PON-NGA WWDM devices for category C - Controlled

6、 environment (IEC 61753-382-2:2015) Dispositifs dinterconnexion et composants passifs fibres optiques - Norme de performance - Partie 382-2: Dispositifs WWDM G-PON-NGA bidirectionnels unimodaux non connectoriss pour la catgorie C - Environnement contrl (IEC 61753-382-2:2015) Lichtwellenleiter - Verb

7、indungselemente und passive Bauteile - Betriebsverhalten - Teil 382-2: Nicht mit Steckern versehene Einmoden-bidirektionale G-PON-NGA WWDM-Bauteile fr die Kategorie C - Kontrollierte Umgebung (IEC 61753-382-2:2015) This European Standard was approved by CENELEC on 2015-12-10. CENELEC members are bou

8、nd to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the C

9、EN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management

10、 Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland,

11、 Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee

12、 fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61753-382-2:2016 E BS EN 61753-382-2:2016EN 61753-382-2:2016 2 European foreword The

13、 text of document 86B/3942/FDIS, future edition 1 of IEC 61753-382-2, prepared by SC 86B “Fibre optic interconnecting devices and passive components“ of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-382-2:2016. The following dates are fix

14、ed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-09-10 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-09-10 Attention is drawn to the

15、possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61753-382-2:2015 was approved by CENELEC as a Euro

16、pean Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61300-3-6 NOTE Harmonized as EN 61300-3-6. IEC 61753-1:2007 NOTE Harmonized as EN 61753-1:2007 (not modified). BS EN 61753-382-2:2016EN 61753-382-2

17、:2016 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition c

18、ited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest vers

19、ions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60793-2-50 - Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres EN 60793-2-50 - IEC 61300 series Fibre optic interconn

20、ecting devices and passive components - Basic test and measurement procedures EN 61300 series IEC 61300-1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance EN 61300-1 - IEC 61300-2-1 - Fibre optic interconnecting devic

21、es and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-1 - IEC 61300-2-4 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention EN 61300-2-4 - IEC

22、61300-2-9 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock EN 61300-2-9 - IEC 61300-2-14 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - High optica

23、l power EN 61300-2-14 - IEC 61300-2-17 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold EN 61300-2-17 - BS EN 61753-382-2:2016EN 61753-382-2:2016 4 Publication Year Title EN/HD Year IEC 61300-2-18 - Fibre optic interconnec

24、ting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance EN 61300-2-18 - IEC 61300-2-19 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (s

25、teady state) EN 61300-2-19 - IEC 61300-2-22 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature EN 61300-2-22 - IEC 61300-2-42 - Fibre optic interconnecting devices and passive components - Basic test and mea

26、surement procedures - Part 2-42: Tests - Static side load for strain relief EN 61300-2-42 - IEC 61300-2-44 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices EN 61300-2-44 - IEC

27、 61300-3-2 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examinations and measurements - Polarization dependent loss in a single-mode fibre optic device EN 61300-3-2 - IEC 61300-3-7 - Fibre optic interconnecting devices and passive c

28、omponents - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components EN 61300-3-7 - IEC 61300-3-20 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedu

29、res - Part 3-20: Examinations and measurements - Directivity of fibre optic branching devices EN 61300-3-20 - IEC 62074-1 - Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification EN 62074-1 - ITU-T Recommendation G.984.2 - Gigabit-capable

30、 Passive Optical Networks (G-PON): Physical Media Dependent (PMD) layer specification - - ITU-T Recommendation G.984.5 - Gigabit-capable passive optical networks (G-PON): Enhancement band - - BS EN 61753-382-2:2016 2 IEC 61753-382-2:2015 IEC 2015 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative reference

31、s 5 3 Terms, definitions and abbreviations . 6 3.1 Terms and definitions 6 3.2 Abbreviations 7 4 Test . 8 5 Test report . 8 6 Performance requirements. 8 6.1 Reference components . 8 6.2 Dimensions . 8 6.3 Sample size 8 6.4 Test details and requirements . 9 Annex A (normative) Sample size 14 Annex B

32、 (informative) General information for G-PON-NGA WDM device 15 Annex C (informative) General information for definition of wavelength ranges for G-PON-NGA WDM devices . 18 Bibliography 20 Figure B.1 Sample of the wavelength dependence of insertion loss of a G-PON-NGA WDM device . 15 Figure B.2 Refer

33、ence diagram of WDM1r from ITU-T Recommendation G.984.5 . 15 Figure B.3 Structure of WDM1r from ITU-T Recommendation G.984.5 . 16 Figure B.4 Reference diagram of a dual-fibre WDM1r with video support from ITU-T Recommendation G.984.5 . 16 Figure B.5 Structure of a dual-fibre WDM1r with video support

34、 from ITU-T Recommendation G.984.5 . 16 Figure B.6 Reference diagram of WDM1r with video and OTDR support from ITU-T Recommendation G.984.5 . 17 Figure B.7 Structure of WDM1r with video and OTDR support from ITU-T Recommendation G.984.5 . 17 Figure C.1 Overview about standardized wavelength ranges 1

35、9 Table 1 Test details and requirements (1 of 5) . 9 Table A.1 Sample size . 14 Table C.1 Operating wavelength range of G-PON NGA (source: ITU-T G.984.5) 18 Table C.2 WWDM device wavelength range for G-PON and NGA (source ITU-T G.984.5) . 18 BS EN 61753-382-2:2016IEC 61753-382-2:2015 IEC 2015 3 INTE

36、RNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD Part 382-2: Non-connectorized single-mode bidirectional G-PON-NGA WWDM devices for category C Controlled environment FOREWORD 1) The International Electrotechnical Commission (IEC)

37、 is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition

38、to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested i

39、n the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with cond

40、itions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC Nat

41、ional Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the w

42、ay in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IE

43、C Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity.

44、IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of i

45、ts technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any ot

46、her IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be th

47、e subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61753-382-2 has been prepared by subcommittee 86B: Fibre optic interconnecting devices and passive components of IEC technical committee 86: Fibre optics. The text

48、of this standard is based on the following documents: FDIS Report on voting 86B/3942FDIS 86B/3962/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. BS EN 61753-382-2:2016 4 IEC 61753-382-2:2015 IEC 2015 This public

49、ation has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 61753 series, published under the general title Fibre optic interconnecting devices and passive components Performance standard, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the s