EN 61754-27-2013 en Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 27 Type M12-FO connector family.pdf

1、BSI Standards PublicationFibre optic interconnecting devices and passive components Fibre optic connector interfacesPart 27: Type M12-FO connector familyBS EN 61754-27:2013National forewordThis British Standard is the UK implementation of EN 61754-27:2013. It isidentical to IEC 61754-27:2013.The UK

2、participation in its preparation was entrusted by TechnicalCommittee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre opticinterconnecting devices and passive components.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not pu

3、rport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2013.Published by BSI Standards Limited 2013ISBN 978 0 580 70313 3ICS 33.180.20Compliance with a British Standard cannot confer immunity fromlegal obligati

4、ons.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 August 2013.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61754-27:2013EUROPEAN STANDARD EN 61754-27 NORME EUROPENNE EUROPISCHE NORM July 2013 CENEL

5、EC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide

6、 for CENELEC members. Ref. No. EN 61754-27:2013 E ICS 33.180.20 English version Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 27: Type M12-FO connector family (IEC 61754-27:2013) Dispositifs dinterconnexion et composants passifs fibres optiques

7、- Interfaces de connecteurs pour fibres optiques - Partie 27: Famille de connecteurs de type M12-FO (CEI 61754-27:2013) Lichtwellenleiter - Verbindungselemente und passive Bauteile - Steckgesichter von Lichtwellenleiter-Steckverbindern - Teil 27: Steckverbinderfamilie der Bauart M12-FO (IEC 61754-27

8、:2013) This European Standard was approved by CENELEC on 2013-06-20. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliogra

9、phical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the respons

10、ibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland

11、, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 61754-27:2013EN 61754-27:

12、2013 - 2 - Foreword The text of document 86B/3597/FDIS, future edition 1 of IEC 61754-27, prepared by IEC/TC 86B “Fibre optic interconnecting devices and passive components” of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61754-27:2013. The fo

13、llowing dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-03-20 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-06-20 Atten

14、tion is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61754-27:2013 was approved by

15、 CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60793-2 NOTE Harmonised as EN 60793-2. IEC 61754-1 NOTE Harmonised as EN 61754-1. IEC 61755 Series NOTE Harmonised as EN 61755 Se

16、ries (partly modified). IEC 61755-1 NOTE Harmonised as EN 61755-1. BS EN 61754-27:2013- 3 - EN 61754-27:2013 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced

17、 in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modification

18、s, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60529 - Degrees of protection provided by enclosures (IP Code) EN 60529 - IEC 60793-2-30 - Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres EN 60793-2

19、-30 - IEC 60793-2-40 - Optical fibres - Part 40: Product specifications - Sectional specification for category A4 multimode fibres EN 60793-2-40 - IEC 60793-2-50 - Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres EN 60793-2-50 - IEC 61076-2-

20、101 - Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking EN 61076-2-101 - IEC 61755-3 Series Fibre optic connector optical interfaces - Part 3: Optical interface EN 61755-3 Series ISO/IEC/TR 29106

21、- Information technology - Generic cabling - Introduction to the MICE environmental classification - - BS EN 61754-27:2013 2 61754-27 IEC:2013 CONTENTS 1 Scope . 5 2 Normative references . 5 3 Description . 5 4 Interfaces . 6 4.1 General . 6 4.2 Part 27-1 plug connector interface for category B1.1 o

22、r B1.3 fibres . 6 4.3 Part 27-2 plug connector interface for category A3c or A3d fibres . 8 4.4 Part 27-3 plug connector interface for category A4a or A4d fibres . 10 4.5 Part 27-4 adaptor connector interface 12 4.6 Part 27-5 active device interface . 13 Bibliography 15 Figure 1 Plug connector inter

23、face PC . 7 Figure 2 Detail of spherically polished ferrule PC endface 8 Figure 3 Plug connector interface for category A3c or A3d fibres 9 Figure 4 Detail of polished ferrule endface for category A3c or A3d fibres 10 Figure 5 Plug connector interface for category A4a or A4d fibres . 11 Figure 6 Det

24、ail of polished ferrule endface for category A4a or A4d fibres . 12 Figure 7 Adaptor connector interface . 13 Figure 8 Active device interface . 14 Table 1 Interfaces 6 Table 2 Intermatability . 6 Table 3 Dimensions for the details in Figure 1 7 Table 4 Dimensions for the details in Figure 2 8 Table

25、 5 Ferrule grades . 8 Table 6 Dimensions of plug connector interface for category A3c or A3d fibres 9 Table 7 Dimensions for the details in Figure 4 10 Table 8 Ferrule grades . 10 Table 9 Dimensions of plug connector interface for category A4a or A4d fibres . 11 Table 10 Dimensions for the details i

26、n Figure 6 12 Table 11 Ferrule grades . 12 Table 12 Dimensions of adaptor connector interface 13 Table 13 Dimensions of active device interface 14 BS EN 61754-27:201361754-27 IEC:2013 5 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC CONNECTOR INTERFACES Part 27: Type M12-FO c

27、onnector family 1 Scope This part of IEC 61754 defines the standard interface dimensions for the type M12-FO family of connectors. This connector is of duplex plug/adaptor/plug configuration and designed for industrial environment as described in ISO/IEC TR 29106, severity class M3and I3. Multiple d

28、esigns for machines and equipment require solutions with different fibre types. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undate

29、d references, the latest edition of the referenced document (including any amendments) applies. IEC 60529, Degrees of protection provided by enclosures (IP Code) IEC 60793-2-30, Optical fibres Part 2-30: Product specifications Sectional specification for category A3 multimode fibres IEC 60793-2-40,

30、Optical fibres Part 2-40: Product specifications Sectional specification for category A4 multimode fibres IEC 60793-2-50, Optical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres IEC 61076-2-101, Connectors for electronic equipment Product requirements

31、Part 2-101: Circular connectors Detail specification for M12 connectors with screw-locking IEC 61755-3 (all parts 3), Fibre optic connector optical interfaces Part 3: Optical interface ISO/IEC TR 29106, Information technology Generic cabling Introduction to the MICE environmental classification 3 De

32、scription The M12-FO connector family is a duplex plug connector set of plug/adaptor configuration which is characterized by a 2,5 mm nominal ferrule diameter and can be used for fibres as described in Table 1. This circular connector includes a housing with a M12-thread screw locking mechanism and

33、a protection according to IEC 60529, IP 65 and IP 67. Electrical M12-connectors are typically used for industrial process, measurement and control. They are described and dimensioned in IEC 61076-2-101 and additional information for the optical connector is given in this standard. BS EN 61754-27:201

34、3 6 61754-27 IEC:2013 The coupling mechanism is spring loaded relative to the ferrules in the direction of the optical axes. The ferrules stand back from the front face in the unmated condition due to a shroud to shelter them from mechanical impact during handling and the mating process. The plug an

35、d adaptor are equipped with four keys to define the mating orientation of the duplex connector. The optical alignment mechanism of the adaptor is from a resilient sleeve style. The alignment mechanism for the active device interface can be a rigid bore or a resilient sleeve. 4 Interfaces 4.1 General

36、 This standard contains the interfaces for the type M12-FO connector family as described in Table 1. The interfaces are intermatable according to Table 2. Table 1 Interfaces Interface Title 27-1 Plug connector interface with spherical polished endface (PC) for IEC 60793-2-50 category B1.1 or B1.3 fi

37、bres. 27-2 Plug connector interface for IEC 60793-2-30 category A3c or A3d fibres. 27-3 Plug connector interface for IEC 60793-2-40 category A4a or A4d fibres. 27-4 Adaptor connector interface 27-5 Active device interface NOTE A plug connector interface with angled polished endface (APC) 8 is not de

38、scribed. Table 2 Intermatability M12-FO connector family IEC 61754-27 interface Adaptor 27-4 Active device 27-5 Plug 27-1 Mate Mate 27-2 Mate Mate 27-3 Mate Mate 4.2 Part 27-1 plug connector interface for category B1.1 or B1.3 fibres The M12-FO plug connector interface with spherical polished endfac

39、e (PC 0, SM fibre) is described in Figures 1 and 2 and Tables 3 to 5. All dimensions are under mated conditions. BS EN 61754-27:201361754-27 IEC:2013 7 OOptical reference planeFigure 1 Plug connector interface PC Table 3 Dimensions for the details in Figure 1 Reference Dimensions mm Remarks Minimum

40、Nominal Maximum Aa1,0 1,3 Dimensions in unmated condition B 7,0 7,5 C 8,0 8,2 D 4,95 5,05 E 8,8 9,0 F 60 G 90 H R0,4 R0,5 I 2,497 2,4 995 K 9,6 9,8 L 10,3 10,8 M 0,8 1,0 N M12 O 10 aFerrule compression force shall be from 7,8 N to 11,8 N when the ferrule is compressed to a point where A is 0,50 mm 0

41、,10 mm. IEC 1196/13 BS EN 61754-27:2013 8 61754-27 IEC:2013 Figure 2 Detail of spherically polished ferrule PC endface Table 4 Dimensions for the details in Figure 2 Reference Dimensions mm Remarks Minimum Maximum Ja0,8 N/A Diameter KbN/A 1,8 Lc5 30 Radius aMaximum value for J is not defined in the

42、IEC 61755-3 series. bMinimum value for K is not defined in the IEC 61755-3 series. cDome eccentricity of the spherical polished endface shall be less than 70 m. N/A = not applicable. Table 5 Ferrule grades Precision grade level Dimensions outer diameter mm Remarks Minimum Maximum 1 2,4 985 2,4 995 2

43、 2,4 980 2,4 995 3 2,4 970 2,4 995 4.3 Part 27-2 plug connector interface for category A3c or A3d fibres The M12-FO plug connector interface for category A3c or A3d fibres are described in Figures 3 and 4 and Tables 6 to 8. All dimensions are under mated conditions. LIEC 1197/13 BS EN 61754-27:20136

44、1754-27 IEC:2013 9 OOptical reference planeFigure 3 Plug connector interface for category A3c or A3d fibres Table 6 Dimensions of plug connector interface for category A3c or A3d fibres Reference Dimensions mm Remarks Minimum Nominal Maximum Aa1,0 1,3 Dimensions in unmated condition B 7,0 7,5 C 8,0

45、8,2 D 4,95 5,05 E 8,8 9,0 F 60 G 90 H R0,4 R0,5 I 2,497 2,4 995 K 9,6 9,8 L 10,3 10,8 M 0,8 1,0 N M12 O 10 aFerrule compression force shall be from 7,8 N to 11,8 N when the ferrule is compressed to a point where A is 0,50 mm 0,10 mm. IEC 1198/13 BS EN 61754-27:2013 10 61754-27 IEC:2013 Figure 4 Deta

46、il of polished ferrule endface for category A3c or A3d fibres Table 7 Dimensions for the details in Figure 4 Reference Dimensions mm Remarks Minimum Maximum Ja0,8 N/AeDiameter KbN/Ae1,8 Lc5 30Radius aMaximum value for J is not defined in the IEC 61755-3 series. bMinimum value for K is not defined in

47、 the IEC 61755-3 series. cDome eccentricity of the spherical polished endface shall be less than 70 m. dN/A: not applicable. Table 8 Ferrule grades Precision grade level Dimensions outer diameter mm Remarks Minimum Maximum 2,470 0 2,499 5 Note NOTE An OI for category A3c or A3d fibres is not yet def

48、ined in the IEC 61755 series. 4.4 Part 27-3 plug connector interface for category A4a or A4d fibres The M12-FO plug connector interface for category A4a or A4d fibres is described in Figure 5 and 6 and Table 9 to 11. All dimensions are under mated conditions. IEC 1197/13 BS EN 61754-27:201361754-27

49、IEC:2013 11 OOptical reference planeFigure 5 Plug connector interface for category A4a or A4d fibres Table 9 Dimensions of plug connector interface for category A4a or A4d fibres Reference Dimensions mm Remarks Minimum Nominal Maximum Aa1,0 1,3 Dimensions in unmated condition B 7,0 7,5 C 8,0 8,2 D 4,95 5,05 E 8,8 9,0 F 60 G 90 H R0,4 R0,5 I 2,48 2,4 995 K 9,6 9,8 L 10,3 10,8 M 0,8 1,0 N M12 M12