EN 61754-4-100-2016 en Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4-100 Type SC connector family - Simplified receptacle S.pdf

1、BSI Standards PublicationFibre optic interconnecting devices and passive components Fibre optic connector interfacesPart 4-100: Type SC connector family Simplified receptacle SC-PC connector interfacesBS EN 61754-4-100:2016National forewordThis British Standard is the UK implementation of EN 61754-4

2、-100:2016.It is identical to IEC 61754-4-100:2015. It supersedes BS EN61754-4-1:2003 which is withdrawn.The UK participation in its preparation was entrusted by TechnicalCommittee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre opticinterconnecting devices and passive components.A list of orga

3、nizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016

4、ISBN 978 0 580 85898 7ICS 33.180.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 29 February 2016.Amendments/corrigenda issued since publicationDate Text affecte

5、dBRITISH STANDARDBS EN 61754-4-100:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61754-4-100 February 2016 ICS 33.180.20 Supersedes EN 61754-4-1:2003 English Version Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4-100: Type SC connect

6、or family - Simplified receptacle SC-PC connector interfaces(IEC 61754-4-100:2015) Dispositifs dinterconnexion et composants passifs fibres optiques - Interfaces de connecteurs fibres optiques - Partie 4-100: Famille de connecteurs de type SC - Interfaces de connecteur SC-PC embase simplifie (IEC 61

7、754-4-100:2015) Lichtwellenleiter - Verbindungselemente und passive Bauteile - Steckgesichter von Lichtwellenleiter-Steckverbindern - Teil 4-100: Steckverbinderfamilie der Bauart SC - Steckgesichter von vereinfachten SC-PC-Anschlussbuchsen (IEC 61754-4-100:2015) This European Standard was approved b

8、y CENELEC on 2015-12-10. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national s

9、tandards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own lan

10、guage and notified to the CEN-CENELEC Management Centre has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, Fran

11、ce, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Nor

12、malisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61754-4-100:2016 E BS EN 61754-4-100:

13、2016EN 61754-4-100:2016 2 European foreword The text of document 86B/3938/FDIS, future edition 1 of IEC 61754-4-100, prepared by SC 86B “Fibre optic interconnecting devices and passive components“ of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as E

14、N 61754-4-100:2016. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-09-10 latest date by which the national standards conflicting with the document have to be withdr

15、awn (dow) 2016-12-10 This document supersedes EN 61754-4-1:2003. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice Th

16、e text of the International Standard IEC 61754-4-100:2015 was approved by CENELEC as a European Standard without any modification. BS EN 61754-4-100:2016EN 61754-4-100:2016 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The fo

17、llowing documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When a

18、n International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61300-3-

19、22 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-22: Examinations and measurements - Ferrule compression force EN 61300-3-22 - IEC 61754-4 2013 Fibre optic interconnecting devices and passive components - Fibre optic connector interface

20、s - Part 4: Type SC connector family EN 61754-4 2013 IEC 61755-3-1 - Fibre optic connector optical interfaces - Part 3-1: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule, single mode fibre EN 61755-3-1 - BS EN 61754-4-100:2016 2 IEC 61754-4-100:2015 IEC 2015 CONTE

21、NTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Description 5 4 Interfaces 6 4.1 General . 6 4.2 Intermateability . 6 4.3 Interfaces and dimensions 6 Annex A (informative) Example of an intermateable set including a simplified receptacle . 12 Bibliography 13 Figure 1 Simplified receptacle hous

22、ing interface 7 Figure 2 Pin gauge for adaptor . 9 Figure 3 Simplified plug interface . 10 Figure A.1 Example of an intermateable set including a simplified receptacle 12 Table 1 Intermateability of the interface . 6 Table 2 Dimensions of the simplified receptacles housings interface 8 Table 3 Grade

23、 of the simplified receptacles housings interface 8 Table 4 Pin gauge dimensions . 9 Table 5 Dimensions of the simplified plug interface 11 Table 6 Grade of the simplified plug interface 11 BS EN 61754-4-100:2016IEC 61754-4-100:2015 IEC 2015 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OPTIC

24、INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC CONNECTOR INTERFACES Part 4-100: Type SC connector family Simplified receptacle SC-PC connector interfaces FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all nationa

25、l electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical S

26、pecifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. Inte

27、rnational, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The fo

28、rmal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations

29、for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user.

30、 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication sh

31、all be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent cert

32、ification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal in

33、jury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references

34、 cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for ident

35、ifying any or all such patent rights. International Standard IEC 61754-4-100 has been prepared by subcommittee SC86B: Fibre optic interconnecting devices and passive components, of IEC technical committee 86: Fibre optics. This first edition of IEC 61754-4-100 cancels and replaces the first edition

36、of IEC 61754-4-1 published in 2003. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) change in the standard number; b) change in the interface number; c) addition of an intermateability table; BS

37、 EN 61754-4-100:2016 4 IEC 61754-4-100:2015 IEC 2015 d) change in the pin gauge specification; e) change in the specification of the ferrule outside diameter; f) addition of multimode to the ferrule grade. The text of this standard is based on the following documents: FDIS Report on voting 86B/3938/

38、FDIS 86B/3959/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 61754 series, published under the

39、general title Fibre optic interconnecting devices and passive components Fibre optic connector interfaces, can be found on the IEC website. Future standards in this series will carry the new general title as cited above. Titles of existing standards in this series will be updated at the time of the

40、next edition. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, repla

41、ced by a revised edition, or amended. BS EN 61754-4-100:2016IEC 61754-4-100:2015 IEC 2015 5 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC CONNECTOR INTERFACES Part 4-100: Type SC connector family Simplified receptacle SC-PC connector interfaces 1 Scope This part of IEC 61754

42、 specifies the standard simplified receptacle interface dimensions for the type SC connector family. The receptacle assembly consists of a simplified receptacle housing and a simplified plug. 2 Normative references The following documents, in whole or in part, are normatively referenced in this docu

43、ment and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61300-3-22, Fibre optic interconnecting devices and passive components Basic test and me

44、asurement procedures Part 3-22: Examinations and measurements Ferrule compression force IEC 61754-4:2013, Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 4:Type SC connector family IEC 61755-3-1, Fibre optic connector optical interfaces Part 3-1: Opti

45、cal interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule, single mode fibre 3 Description The parent connector for the type SC connector family is a single-position plug which is characterized by a cylindrical, spring-loaded butting ferrule of 2,5 mm typical diameter, and a pu

46、sh-pull coupling mechanism. a) The simplified receptacles are made up of simplified receptacle housings and simplified plugs. b) The simplified receptacle housings are used to retain the connector plug and mechanically maintain the optical datum target of the plugs at a defined position within the s

47、implified receptacle housings. c) A spring is not included in the simplified plug. d) The simplified plug is removed with the aid of a tool. e) The optical alignment mechanism of the connector is of a resilient sleeve style. f) The simplified receptacle housings are to be mated with the plug specifi

48、ed in IEC 61754-4:2013, Figure 1 which is the mating part of the simplified plug. BS EN 61754-4-100:2016 6 IEC 61754-4-100:2015 IEC 2015 4 Interfaces 4.1 General This standard contains the following standard interfaces. Interface IEC 61754-4-100-1: simplified receptacles housings interface Interface

49、 IEC 61754-4-100-2: simplified plugs interface The simplified plug has a ferrule with a spherical polished ferrule endface, and realizes physical contact (PC). 4.2 Intermateability Table 1 shows the intermateability of the interface. The mating plugs shall employ the ferrule with the same polished endface shape. An example of an intermateable set is shown in Figure A.1. Table 1 Intermateability of the interface Simplified receptacle housing interface Pl