EN 61757-1-2012 en Fibre optic sensors - Part 1 Generic specification.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationFibre optic sensors Part 1: Generic specificationBS EN 61757-1:2012National forewordThis British Standard is the UK implementation of EN 61757-1:2012. It isidentical to IEC 61757

2、-1:2012. It supersedes BS EN 61757-1:1999 which iswithdrawn.The UK participation in its preparation was entrusted by Technical CommitteeGEL/86, Fibre optics, to Subcommittee GEL/86/3, Fibre optic systems andactive devices.A list of organizations represented on this committee can be obtained onreques

3、t to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. The British Standards Institution 2012Published by BSI Standards Limited 2012ISBN 978 0 580 74338 2ICS 33.180.20Compliance with a British Stan

4、dard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 August 2012.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 61757-1:2012EUROPEAN STANDARD EN 61757-1 NORME

5、 EUROPENNE EUROPISCHE NORM July 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2012 CENELEC - All rights of exploitation in an

6、y form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61757-1:2012 E ICS 33.180.99 Supersedes EN 61757-1:1999English version Fibre optic sensors - Part 1: Generic specification (IEC 61757-1:2012) Capteurs a fibres optiques - Partie 1: Spcification gnrique (CEI 61757-1:2012) LWL

7、-Sensoren - Teil 1: Fachgrundspezifikation (IEC 61757-1:2012) This European Standard was approved by CENELEC on 2012-06-19. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard

8、 without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in a

9、ny other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia

10、, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey

11、and the United Kingdom. BS EN 61757-1:2012EN 61757-1:2012 - 2 - Foreword The text of document 86C/1059/FDIS, future edition 2 of IEC 61757-1, prepared by SC 86C, “Fibre optic systems and active devices“, of IEC TC 86, “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENE

12、LEC as EN 61757-1:2012. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-03-19 latest date by which the national standards conflicting with the document have to be wi

13、thdrawn (dow) 2015-06-19 This document supersedes EN 61757-1:1999. EN 61757-1:2012 includes a substantial technical update of all clauses, definitions, and cited references with respect to EN 61757-1:1999. Attention is drawn to the possibility that some of the elements of this document may be the su

14、bject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61757-1:2012 was approved by CENELEC as a European Standard without any modification. In the official version, for Bib

15、liography, the following notes have to be added for the standards indicated: IEC 60654-4 NOTE Harmonized as EN 60654-4. IEC 60721-1 NOTE Harmonized as EN 60721-1. BS EN 61757-1:2012- 3 - EN 61757-1:2012 Annex ZA (normative) Normative references to international publications with their corresponding

16、European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendm

17、ents) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60050 - International Electrotechnical Vocabulary (IEV) - - IEC 60060-1 - High-voltage test techniques - Part 1: Gene

18、ral definitions and test requirements EN 60060-1 - IEC 60068-1 - Environmental testing - Part 1: General and guidance EN 60068-1 - IEC 60068-2-1 - Environmental testing - Part 2-1: Tests - Test A: Cold EN 60068-2-1 - IEC 60068-2-2 - Environmental testing - Part 2-2: Tests - Test B: Dry heat EN 60068

19、-2-2 - IEC 60068-2-5 - Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing EN 60068-2-5 - IEC 60068-2-6 - Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) EN 60068-2-6 - IEC 60068-2-10 - Enviro

20、nmental testing - Part 2-10: Tests - Test J and guidance: Mould growth EN 60068-2-10 - IEC 60068-2-11 - Basic Environmental testing procedures - Part 2: Tests - Test Ka: Salt mist EN 60068-2-11 - IEC 60068-2-13 - Basic Environmental testing procedures - Part 2: Tests - Test M: Low air pressure EN 60

21、068-2-13 - IEC 60068-2-14 - Environmental testing - Part 2-14: Tests - Test N: Change of temperature EN 60068-2-14 - IEC 60068-2-27 - Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock EN 60068-2-27 - IEC 60068-2-30 - Environmental testing - Part 2-30: Tests - Test Db: Damp heat,

22、 cyclic (12 h + 12 h cycle) EN 60068-2-30 - IEC 60068-2-42 - Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections EN 60068-2-42 - IEC 60068-2-43 - Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections

23、EN 60068-2-43 - BS EN 61757-1:2012EN 61757-1:2012 - 4 - Publication Year Title EN/HD Year IEC 60068-2-78 - Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state EN 60068-2-78 - IEC 60079-28 - Explosive atmospheres - Part 28: Protection of equipment and transmission systems usi

24、ng optical radiation EN 60079-28 - IEC 60529 - Degrees of protection provided by enclosures (IP Code) EN 60529 - IEC 60695-11-5 - Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance EN 60695-11-5 - IEC 60793-1-1 - Optical fi

25、bres - Part 1-1: Measurement methods and test procedures - General and guidance EN 60793-1-1 - IEC 60793-1-54 - Optical fibres - Part 1-54: Measurement methods and test procedures - Gamma irradiation EN 60793-1-54 - IEC 60793-2 - Optical fibres - Part 2: Product specifications - General EN 60793-2 -

26、 IEC 60794-1-1 - Optical fibre cables - Part 1-1: Generic specification - General EN 60794-1-1 - IEC 60794-1-2 - Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures EN 60794-1-2 - IEC 60825-1 - Safety of laser products - Part 1: Equipment classification and r

27、equirements EN 60825-1 - IEC 60874-1 - Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification EN 60874-1 - IEC 61000-4-2 - Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic

28、 discharge immunity test EN 61000-4-2 - IEC 61000-4-3 - Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test EN 61000-4-3 - IEC 61000-4-4 - Electromagnetic compatibility (EMC) - Part 4-4: Testing and measu

29、rement techniques - Electrical fast transient/burst immunity test EN 61000-4-4 - IEC 61000-4-5 - Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test EN 61000-4-5 - IEC 61300 Series Fibre optic interconnecting devices and passive components - Basic

30、 test and measurement procedures EN 61300 Series BS EN 61757-1:2012- 5 - EN 61757-1:2012 Publication Year Title EN/HD Year IEC 61300-2-18 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance EN

31、 61300-2-18 - IEC 61300-2-22 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature EN 61300-2-22 - IEC 61300-2-34 - Fibre optic interconnecting devices and passive components - Basic test and measurement proced

32、ures - Part 2-34: Tests - Resistance to solvents and contaminating fluids of interconnecting components and closures EN 61300-2-34 - IEC 61300-2-46 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-46: Tests - Damp heat cyclic EN 61300-2-46

33、 - IEC 61300-3-35 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Fibre optic connector endface visual and automated inspection EN 61300-3-35 - IEC 61753 Series Fibre optic interconnecting devices and p

34、assive components performance standard EN 61753 Series IEC/TR 61931 - Fibre optic - Terminology - - IEC/TR 62222 - Fire performance of communication cables installed in buildings - - IEC/TR 62283 - Optical fibres - Guidance for nuclear radiation tests - - IEC/TR 62362 - Selection of optical fibre ca

35、ble specifications relative to mechanical, ingress, climatic or electromagnetic characteristics - Guidance - - IEC/TR 62627-01 - Fibre optic interconnecting devices and passive components - Part 01: Fibre optic connector cleaning methods - - ISO/IEC Guide 98-3 - Uncertainty of measurement - Part 3:

36、Guide to the expression of uncertainty in measurement (GUM:1995) - - ISO/IEC Guide 99 - International vocabulary of metrology - Basic and general concepts and associated terms (VIM) - - BS EN 61757-1:2012 2 61757-1 IEC:2012 CONTENTS 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 8

37、4 Quality assurance . 15 5 Test and measurement procedures . 15 5.1 General . 15 5.2 Standard conditions for testing 16 5.3 Test and measurement equipment requirements . 16 5.4 Visual inspection . 16 5.5 Dimensions . 16 5.6 Metrological properties 16 5.6.1 General . 16 5.6.2 Metrological parameters

38、17 5.7 Optical tests 17 5.7.1 General . 17 5.7.2 Optical power 17 5.7.3 Nominal wavelength and appropriate spectral characteristics 17 5.7.4 State of polarization 17 5.7.5 Fibre connector performance . 17 5.8 Electrical tests . 18 5.8.1 General . 18 5.8.2 Parameters and test procedures 18 5.8.3 Volt

39、age stress . 18 5.9 Mechanical tests . 18 5.9.1 General . 18 5.9.2 Parameters and test procedures 19 5.10 Climatic and environmental tests . 19 5.10.1 General . 19 5.10.2 Parameters and test procedures 19 5.11 Susceptibility to ambient light 20 5.12 Resistance to solvents and contaminating fluids 20

40、 6 Classification 20 6.1 General . 20 6.2 Measurand 20 6.2.1 Presence/absence of objects or features . 20 6.2.2 Position . 21 6.2.3 Rate of positional change 21 6.2.4 Flow 21 6.2.5 Temperature 21 6.2.6 Force x directional vector 21 6.2.7 Force per area . 22 6.2.8 Strain 22 6.2.9 Electromagnetic quan

41、tities . 22 BS EN 61757-1:201261757-1 IEC:2012 3 6.2.10 Ionizing and nuclear radiation 22 6.2.11 Other physical properties of materials 22 6.2.12 Composition and specific chemical quantities 23 6.2.13 Particulates . 23 6.2.14 Imaging . 23 6.3 Transduction principle . 23 6.3.1 Active generation of li

42、ght . 23 6.3.2 Atom-field interaction . 23 6.3.3 Coherence modulation . 23 6.3.4 Intensity modulation 23 6.3.5 Optical spectrum modulation . 23 6.3.6 Phase modulation 24 6.3.7 Polarization modulation . 24 6.4 Spatial distribution . 24 6.5 Interface level . 24 7 Marking, labelling, packaging . 24 7.1

43、 Marking of component . 24 7.2 Marking of sealed package 24 8 IEC type designation 24 9 Safety aspects 25 9.1 General . 25 9.2 Personal safety . 25 9.3 Safety in explosive environment 25 10 Ordering information . 25 11 Drawings included in the sectional, family and detail specifications 25 Annex A (

44、informative) Examples of fibre optic sensors . 26 Bibliography 34 Figure 1 Fibre optic sensor configuration with a passive sensing element and separate fibre leads for optical input and output 14 Figure 2 Fibre optic sensor configuration with an active sensing 14 Figure 3 Fibre optic sensor configur

45、ation with a passive sensing element and one fibre lead for optical input and output; signal separation is realized by a Y-splitter 15 BS EN 61757-1:2012 6 61757-1 IEC:2012 FIBRE OPTIC SENSORS Part 1: Generic specification 1 Scope This part of IEC 61757 is a generic specification covering optical fi

46、bres, components and sub-assemblies as they pertain specifically to fibre optic sensing applications. It has been designed to be used as a common working and discussion tool by the vendor of components and subassemblies intended to be integrated in fibre optic sensors, as well as by designers, manuf

47、acturers and users of fibre optic sensors independent of any application or installation. The objective of this generic specification is to define, classify and provide the framework for specifying fibre optic sensors, and their specific components and subassemblies. The requirements of this standar

48、d apply to all related sectional, family, and detail specifications. Sectional specifications will contain requirements specific to sensors for particular quantities subject to measurement. Within each sectional specification, family and detail specifications contain requirements for a particular st

49、yle or variant of a fibre optic sensor of that sectional specification. A fibre optic sensor contains an optical or optically powered sensing element in which the information is created by reaction of light to a measurand. The sensing element can be the fibre itself or an optically powered element inserted along the optical path. In a fibre optic sensor, one or more light parameters are directly or indirectly modified by the measurand somewhere in the optical path, contrary to an optical data link where the information is merely t