EN 61784-5-13-2013 en Industrial communication networks - Profiles - Part 5-13 Installation of fieldbuses - Installation profiles for CPF 13.pdf

1、BSI Standards PublicationIndustrial communication networks ProfilesPart 5-13: Installation of fieldbuses Installation profiles for CPF 13BS EN 61784-5-13:2013National forewordThis British Standard is the UK implementation of EN 61784-5-13:2013. It isidentical to IEC 61784-5-13:2013.The UK participat

2、ion in its preparation was entrusted to Technical Com-mittee AMT/7, Industrial communications: process measurement andcontrol, including fieldbus.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the nece

3、ssary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 84199 6ICS 25.040.40; 35.100.40Compliance with a British Standard cannot confer immunity fromlegal obligations.This British S

4、tandard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2014.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61784-5-13:2013EUROPEAN STANDARD EN 61784-5-13 NORME EUROPENNE EUROPISCHE NORM December 2013 CENELEC Europe

5、an Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldw

6、ide for CENELEC members. Ref. No. EN 61784-5-13:2013 E ICS 25.040.40; 35.100.40 English version Industrial communication networks - Profiles - Part 5-13: Installation of fieldbuses - Installation profiles for CPF 13 (IEC 61784-5-13:2013) Rseaux de communication industriels - Profils - Partie 5-13: I

7、nstallation des bus de terrain - Profils dinstallation pour CPF 13 (CEI 61784-5-13:2013) Industrielle Kommunikationsnetze - Profile - Teil 5-13: Feldbusinstallation - Installationsprofile fr die Kommunikationsprofilfamilie 13 (IEC 61784-5-13:2013) This European Standard was approved by CENELEC on 20

8、13-10-22. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be

9、 obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notif

10、ied to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, G

11、reece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 61784-5-13:2013EN 61784-5-13:2013 - 2 - Foreword The text of document 65C/738/FDIS,

12、future edition 1 of IEC 61784-5-13, prepared by SC 65C “Industrial networks“ of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61784-5-13:2013. The following dates are fixed: latest date by which the doc

13、ument has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-07-22 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-10-22 This standard is to be used in conjunction with EN 61918:2

14、013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61784-5-13:2013 was

15、 approved by CENELEC as a European Standard without any modification. BS EN 61784-5-13:2013- 3 - EN 61784-5-13:2013 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively ref

16、erenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modif

17、ications, indicated by (mod), the relevant EN/HD applies. Annex ZA of EN 61918:2013 applies, except as follows: Publication Year Title EN/HD Year Addition to Annex ZA of EN 61918:2013: IEC 61918 2013 Industrial communication networks - Installation of communication networks in industrial premises EN

18、 61918 2013 BS EN 61784-5-13:2013 2 61784-5-13 IEC:2013 CONTENTS INTRODUCTION . 6 1 Scope . 7 2 Normative references . 7 3 Terms, definitions and abbreviated terms . 7 4 CPF 13: Overview of installation profiles 7 5 Installation profile conventions . 7 6 Conformance to installation profiles 8 Annex

19、A (normative) CP 13/1 (Ethernet POWERLINK) specific installation profile 9 A.1 Installation profile scope . 9 A.2 Normative references . 9 A.3 Installation profile terms, definitions, and abbreviated terms . 9 A.3.1 Terms and definitions 9 A.3.2 Abbreviated terms . 9 A.3.3 Conventions for installati

20、on profiles . 9 A.4 Installation planning . 9 A.4.1 General . 9 A.4.2 Planning requirements . 9 A.4.2.1 Safety . 9 A.4.2.2 Security 9 A.4.2.3 Environmental considerations and EMC 9 A.4.2.4 Specific requirements for generic cabling in accordance with ISO/IEC 24702 10 A.4.3 Network capabilities 10 A.4

21、.3.1 Network topology 10 A.4.3.2 Network characteristics . 10 A.4.4 Selection and use of cabling components 12 A.4.4.1 Cable selection . 12 A.4.4.2 Connecting hardware selection . 14 A.4.4.3 Connections within a channel/permanent link 15 A.4.4.4 Terminators 15 A.4.4.5 Device location and connection

22、. 15 A.4.4.6 Coding and labelling . 15 A.4.4.7 Earthing and bonding of equipment and devices and shielded cabling 16 A.4.4.8 Storage and transportation of cables . 16 A.4.4.9 Routing of cables 16 A.4.4.10 Separation of circuit 16 A.4.4.11 Mechanical protection of cabling components . 16 A.4.4.12 Ins

23、tallation in special areas . 16 A.4.5 Cabling planning documentation 16 A.4.6 Verification of cabling planning specification . 16 A.5 Installation implementation . 16 A.5.1 General requirements 16 A.5.2 Cable installation . 16 BS EN 61784-5-13:201361784-5-13 IEC:2013 3 A.5.3 Connector installation 1

24、6 A.5.4 Terminator installation . 16 A.5.5 Device installation . 17 A.5.5.1 Common description . 17 A.5.5.2 Specific requirements for CPs . 17 A.5.6 Coding and labelling 17 A.5.6.1 Common description . 17 A.5.6.2 Specific requirements for CPs . 17 A.5.7 Earthing and bonding of equipment and devices

25、and shield cabling . 17 A.5.8 As-implemented cabling documentation . 17 A.6 Installation verification and installation acceptance test 17 A.6.1 General . 17 A.6.2 Installation verification . 17 A.6.2.1 General . 17 A.6.2.2 Verification according to cabling planning documentation 17 A.6.2.3 Verificat

26、ion of earthing and bonding 17 A.6.2.4 Verification of shield earthing 17 A.6.2.5 Verification of cabling system 17 A.6.2.6 Cable selection verification . 17 A.6.2.7 Connector verification . 17 A.6.2.8 Connection verification 18 A.6.2.9 Terminators verification . 18 A.6.2.10 Coding and labelling ver

27、ification . 18 A.6.2.11 Verification report . 18 A.6.3 Installation acceptance test . 18 A.6.3.1 General . 18 A.6.3.2 Acceptance test of Ethernet-based cabling . 18 A.6.3.3 Acceptance test of nonEthernet-based cabling 18 A.6.3.4 Specific requirements for wireless installation . 18 A.6.3.5 Acceptance

28、 test report 18 A.7 Installation administration . 19 A.8 Installation maintenance and installation troubleshooting . 19 Figure 1 Standards relationships 6 Table A.1 Network characteristics for balanced cabling based on Ethernet 11 Table A.2 Network characteristics for optical fibre cabling 11 Table

29、A.3 Information relevant to copper cable: fixed cables 12 Table A.4 Information relevant to copper cable: cords 13 Table A.5 Information relevant to optical fibre cables . 13 Table A.6 Connectors for balanced cabling CPs based on Ethernet . 14 Table A.7 Optical fibre connecting hardware 14 Table A.8

30、 Relationship between FOC and fibre types (CP 13/1) . 15 BS EN 61784-5-13:2013 6 61784-5-13 IEC:2013 INTRODUCTION This International Standard is one of a series produced to facilitate the use of communication networks in industrial control systems. IEC 61918:2013 provides the common requirements for

31、 the installation of communication networks in industrial control systems. This installation profile standard provides the installation profiles of the communication profiles (CP) of a specific communication profile family (CPF) by stating which requirements of IEC 61918 fully apply and, where neces

32、sary, by supplementing, modifying, or replacing the other requirements (see Figure 1). For general background on fieldbuses, their profiles, and relationship between the installation profiles specified in this standard, see IEC 61158-1. Each CP installation profile is specified in a separate annex o

33、f this standard. Each annex is structured exactly as the reference standard IEC 61918 for the benefit of the persons representing the roles in the fieldbus installation process as defined in IEC 61918 (planner, installer, verification personnel, validation personnel, maintenance personnel, administr

34、ation personnel). By reading the installation profile in conjunction with IEC 61918, these persons immediately know which requirements are common for the installation of all CPs and which are modified or replaced. The conventions used to draft this standard are defined in Clause 5. The provision of

35、the installation profiles in one standard for each CPF (for example IEC 61784-5-13 for CPF 13), allows readers to work with standards of a convenient size. INDUSTRIAL PREMISESISO/IEC 24702OFFICE PREMISES ISO/IEC 11801ISO/IEC14763-2IEC 61918(Common requirements)IEC 61158 seriesandIEC 61784-1, -2GENER

36、IC CABLINGBETWEENAUTOMATIONISLANDSAPPLICATION-SPECIFICCABLINGWITHINAUTOMATIONISLANDSBETWEENAUTOMATIONISLANDSDESIGNPLANNING AND INSTALLATIONInstallation ProfilesIEC 61784-5 series(Selection +Add/Repl/Mod)Common structureData centre AnnexHomeAnnexOfficesAnnexIndustrialAnnexISO/IEC 15018ISO/IEC 24764HO

37、MES DATA CENTRESFigure 1 Standards relationships BS EN 61784-5-13:201361784-5-13 IEC:2013 7 INDUSTRIAL COMMUNICATION NETWORKS PROFILES Part 5-13: Installation of fieldbuses Installation profiles for CPF 13 1 Scope This part of IEC 61784-5 specifies the installation profiles for CPF 13 (Ethernet POWE

38、RLINK1). The installation profiles are specified in the annex. This annex is read in conjunction with IEC 61918:2013. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only

39、 the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61918:2013, Industrial communication networks Installation of communication networks in industrial premises The normative references of IEC 61918:2013, Clause 2,

40、apply. For profile specific normative references, see Clause A.2. 3 Terms, definitions and abbreviated terms For the purpose of this document, the terms, definitions and abbreviated terms given in IEC 61918:2013, Clause 3, apply. For profile specific terms, definitions and abbreviated terms see Clau

41、se A.3. 4 CPF 13: Overview of installation profiles CPF 13 consists of one Communication Profile as specified in IEC 61784-2. The installation requirements for CP 13/1 (Ethernet POWERLINK) are specified in Annex A. 5 Installation profile conventions The numbering of the clauses and subclauses in the

42、 annexes of this standard corresponds to the numbering of IEC 61918 main clauses and subclauses. The annex clauses and subclauses of this standard supplement, modify, or replace the respective clauses and subclauses in IEC 61918. _ 1Ethernet POWERLINK is a trade name of Bernecker Type B1 IEC 60793-2

43、-10; Type A1a IEC 60793-2-10; Type A1b IEC 60793-2-40; Type A4a IEC 60793-2-40; Type A3c Attenuation per km (650 nm) 160 dB/km 10 dB/km Attenuation per km (820 nm) Attenuation per km (1 310 nm) 0,5 dB/km 1,5 dB/km 1,5 dB/km Number of optical fibres 2 2 2 2 2 Jacket colour requirements Jacket materia

44、l Resistance to harsh environment (e.g. UV, oil resist, LS0H) Application dependent BS EN 61784-5-13:2013 14 61784-5-13 IEC:2013 A.4.4.1.5 Special purpose balanced and optical fibre cables A.4.4.1.6 Specific requirements for CPs Not applicable. A.4.4.1.7 Specific requirements for generic cabling in

45、accordance with ISO/IEC 24702 A.4.4.2 Connecting hardware selection A.4.4.2.1 Common description A.4.4.2.2 Connecting hardware for balanced cabling CPs based on Ethernet Replacement: Table A.6 provides values based on the template given in IEC 61918:2013, Table 7. Table A.6 Connectors for balanced c

46、abling CPs based on Ethernet IEC 60603-7 series a IEC 61076-3-106 b IEC 61076-3-117 b IEC 61076-101 IEC 61076-2-109 shielded unshielded Var. 1 Var. 6 Var. 14 M12-4 with D-coding M12-8 with X-coding CP 13/1 IEC 60603 -7-3 or IEC 60603-7-5 No No No No Yes No aFor IEC 60603-7 series, the connector sele

47、ction is based on the desired channel performance. bHousings to protect connectors. A.4.4.2.3 Connecting hardware for copper cabling CPs not based on Ethernet Not applicable. A.4.4.2.4 Connecting hardware for wireless installation A.4.4.2.5 Connecting hardware for optical fibre cabling Replacement:

48、Table A.7 provides values based on the template given in IEC 61918:2013, Table 9. Table A.7 Optical fibre connecting hardware IEC 61754-2 IEC 61754-4 IEC 61754-24 IEC 61754-20 IEC 61754-22 Others BFOC/2,5 SC SC-RJ LC F-SMA CP 13/1 No Yes Yes Yes No No NOTE IEC 61754 series defines the optical fibre

49、connector mechanical interfaces; performance specifications for optical fibre connectors terminated to specific fibre types are standardised in IEC 61753 series. Replacement: Table A.8 provides values based on the template given in IEC 61918:2013, Table 10. BS EN 61784-5-13:201361784-5-13 IEC:2013 15 Table A.8 Relationship between FOC and fibre types (CP 13/1) FOC Fibre type 910/125 m single mode silica 50/125 m multimode silica 62,5/125 m multimod