EN 61784-5-14-2013 en Industrial communication networks - Profiles - Part 5-14 Installation of fieldbuses - Installation profiles for CPF 14.pdf

1、BSI Standards PublicationIndustrial communication networks ProfilesPart 5-14: Installation of fieldbuses Installation profiles for CPF 14BS EN 61784-5-14:2013National forewordThis British Standard is the UK implementation of EN 61784-5-14:2013. It isidentical to IEC 61784-5-14:2013. It supersedes BS

2、 EN 61784-5-14:2012which is withdrawn.The UK participation in its preparation was entrusted to Technical Com-mittee AMT/7, Industrial communications: process measurement andcontrol, including fieldbus.A list of organizations represented on this committee can be obtained onrequest to its secretary.Th

3、is publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 84200 9ICS 25.040.40; 35.100.40Compliance with a British Standard cann

4、ot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2014.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61784-5-14:2013EUROPEAN STANDARD EN 61784-5-14 NORME

5、 EUROPENNE EUROPISCHE NORM December 2013 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of ex

6、ploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61784-5-14:2013 E ICS 25.040.40; 35.100.40 Supersedes EN 61784-5-14:2012 English version Industrial communication networks - Profiles - Part 5-14: Installation of fieldbuses - Installation profiles for CPF 14

7、 (IEC 61784-5-14:2013) Rseaux de communication industriels - Profils - Partie 5-14: Installation des bus de terrain - Profils dinstallation pour CPF 14 (CEI 61784-5-14:2013) Industrielle Kommunikationsnetze - Profile - Teil 5-14: Feldbusinstallation - Installationsprofile fr die Kommunikationsprofil

8、familie 14 (IEC 61784-5-14:2013) This European Standard was approved by CENELEC on 2013-10-18. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-t

9、o-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by tra

10、nslation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

11、 Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN

12、 61784-5-14:2013EN 61784-5-14:2013 - 2 - Foreword The text of document 65C/738/FDIS, future edition 2 of IEC 61784-5-14, prepared by SC 65C “Industrial networks“ of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENEL

13、EC as EN 61784-5-14:2013. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-07-18 latest date by which the national standards conflicting with the document have to be

14、withdrawn (dow) 2016-10-18 This document supersedes EN 61784-5-14:2012. IEC 61784-5-14:2013 includes the following significant technical changes with respect to EN 61784-5-14:2012: - requirements for CP 14/3 have been added; - recommendations for the applications about the linear/ring topology netwo

15、rks have been added; - Table A.2 and Table A.6 have been updated. This standard is to be used in conjunction with EN 61918:2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for

16、identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61784-5-14:2013 was approved by CENELEC as a European Standard without any modification. BS EN 61784-5-14:2013- 3 - EN 61784-5-14:2013 Annex ZA (normative) Normative references to international p

17、ublications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the refe

18、renced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Annex ZA of EN 61918:2013 applies, except as follows: Publication Year Title EN/HD Year Addition to Annex ZA of EN 619

19、18:2013: IEC 61918 2013 Industrial communication networks - Installation of communication networks in industrial premises EN 61918 2013 BS EN 61784-5-14:2013 2 61784-5-14 IEC:2013 CONTENTS INTRODUCTION . 6 1 Scope . 7 2 Normative references . 7 3 Terms, definitions and abbreviated terms . 7 4 CPF 14

20、: Overview of installation profiles 7 5 Installation profile conventions . 7 6 Conformance to installation profiles 8 Annex A (Normative) CP 14/1, 14/2 and 14/3 (EPA) specific installation profile . 9 A.1 Installation profile scope . 9 A.2 Normative references . 9 A.3 Installation profile terms, def

21、initions, and abbreviated terms . 9 A.3.1 Terms and definitions 9 A.3.2 Abbreviated terms . 9 A.3.3 Conventions for installation profiles . 9 A.4 Installation planning . 9 A.4.1 General . 9 A.4.2 Planning requirements . 9 A.4.3 Network capabilities 12 A.4.4 Selection and use of cabling components 16

22、 A.4.5 Cabling planning documentation 23 A.4.6 Verification of cabling planning specification . 23 A.5 Installation implementation . 23 A.5.1 General requirements 23 A.5.2 Cable installation . 23 A.5.3 Connector installation 25 A.5.4 Terminator installation . 30 A.5.5 Device installation . 30 A.5.6

23、Coding and labelling 30 A.5.7 Earthing and bonding of equipment and devices and shield cabling . 30 A.5.8 As-implemented cabling documentation . 30 A.6 Installation verification and installation acceptance test 30 A.6.1 General . 30 A.6.2 Installation verification . 30 A.6.3 Installation acceptance

24、test . 31 A.7 Installation administration . 32 A.8 Installation maintenance and installation troubleshooting . 32 Figure 1 Standards relationships 6 Figure A.1 Example of EPA explosion-proof system . 10 Figure A.2 Earth of zener safety barrier . 11 Figure A.3 Earth of isolated safety barrier 11 Figu

25、re A.4 Three stars coupled to a ring topology 12 Figure A.5 Five daisy chain lines coupled to a ring topology 12 BS EN 61784-5-14:201361784-5-14 IEC:2013 3 Figure A.6 Five sub-rings coupled to a ring topology 13 Figure A.7 Example of power with Ethernet 15 Figure A.8 Example of power supply over 0,2

26、 A . 16 Figure A.9 Example of power with Ethernet in linear/ring topology network 16 Figure A.10 Examples of earthing method for the linear/ring topologies network 22 Figure A.11 Pin assignment of sub-D connector . 25 Figure A.12 Example of a 4-pin open style connector . 27 Figure A.13 Example of a

27、6-pin open style connector . 28 Figure A.14 Example of an 8-pin open style connector . 29 Table A.1 Network characteristics for balanced cabling based on Ethernet 14 Table A.2 Network characteristics for optical fibre cabling 14 Table A.3 Information relevant to copper cable 16 Table A.4 Information

28、 relevant to copper cable: fixed cables 17 Table A.5 Information relevant to copper cable: cords 17 Table A.6 Information relevant to optical fibre cables . 18 Table A.7 Connectors for balanced cabling CPs based on Ethernet . 19 Table A.8 Optical fibre connecting hardware 19 Table A.9 Relationship b

29、etween FOC and fibre type (CP 14/1, CP 14/2 and CP 14/3) 20 Table A.10 Specific connectors for balanced cabling based on Ethernet 20 Table A.11 Requirements of sub-D and open style connector 21 Table A.12 Parameters for balanced cables . 23 Table A.13 Parameters for silica optical fibre cables 24 Ta

30、ble A.14 Parameters for POF optical fibre cables . 24 Table A.15 Parameters for hard cladded silica optical fibre cables . 24 Table A.16 Signal lines assignment of sub-D connector . 26 Table A.17 Signal lines assignment of sub-D connector for 1 000 Base Ethernet . 26 Table A.18 Signal lines assignme

31、nt for a 4-pin open style connector . 27 Table A.19 Signal lines assignment for a 6-pin open style connector . 28 Table A.20 Signal lines assignment for an 8-pin open style connector(10/100 Mbps) . 29 Table A.21 Signal lines assignment for an 8-pin open style connector(1 000 Mbit/s) 30 BS EN 61784-5

32、-14:2013 6 61784-5-14 IEC:2013 INTRODUCTION This International Standard is one of a series produced to facilitate the use of communication networks in industrial control systems. IEC 61918:2013 provides the common requirements for the installation of communication networks in industrial control syst

33、ems. This installation profile standard provides the installation profiles of the communication profiles (CP) of a specific communication profile family (CPF) by stating which requirements of IEC 61918 fully apply and, where necessary, by supplementing, modifying, or replacing the other requirements

34、 (see Figure 1). For general background on fieldbuses, their profiles, and relationship between the installation profiles specified in this standard, see IEC 61158-1. Each CP installation profile is specified in a separate annex of this standard. Each annex is structured exactly as the reference sta

35、ndard IEC 61918 for the benefit of the persons representing the roles in the fieldbus installation process as defined in IEC 61918 (planner, installer, verification personnel, validation personnel, maintenance personnel, administration personnel). By reading the installation profile in conjunction w

36、ith IEC 61918, these persons immediately know which requirements are common for the installation of all CPs and which are modified or replaced. The conventions used to draft this standard are defined in Clause 5. The provision of the installation profiles in one standard for each CPF (for example IE

37、C 61784-5-14 for CPF 14), allows readers to work with standards of a convenient size. Figure 1 Standards relationships BS EN 61784-5-14:201361784-5-14 IEC:2013 7 INDUSTRIAL COMMUNICATION NETWORKS PROFILES Part 5-14: Installation of fieldbuses Installation profiles for CPF 14 1 Scope This part of IEC

38、 61784-5 specifies the installation profiles for CPF 14 (EPA1). The installation profiles are specified in the annex. This annex is read in conjunction with IEC 61918:2013. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indisp

39、ensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61918:2013, Industrial communication networks Installation of communication networks in industrial premises

40、 The normative references of IEC 61918:2013, Clause 2, apply. 3 Terms, definitions and abbreviated terms For the purposes of this document, the terms, definitions and abbreviated terms of IEC 61918 :2013 Clause 3, apply. 4 CPF 14: Overview of installation profiles CPF 14 consists of three communicat

41、ion profiles as specified in IEC 61784-2. The installation requirements for CP 14/1, CP 14/2 and CP 14/3 (EPA) are specified in Annex A. 5 Installation profile conventions The numbering of the clauses and subclauses in the annexes of this standard corresponds to the numbering of IEC 61918 main claus

42、es and subclauses. The annex clauses and subclauses of this standard supplement, modify, or replace the respective clauses and subclauses in IEC 61918. _ 1 EPA is the technology name of the CPF14. EPA is the trade name of Zhejiang SUPCON Technology Group Co. Ltd, China. This information is given for

43、 the convenience of users of this document and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance to this profile does not require use of the trade name. Use of the trade name requires permission of the trade name holder. BS EN 61784-5-14:2013 8 6178

44、4-5-14 IEC:2013 Where there is no corresponding subclause of IEC 61918:2013 in the normative annexes in this standard, the subclause of IEC 61918 applies without modification. The annex heading letter represents the installation profile assigned in Clause 4. The annex heading number shall represent

45、the corresponding numbering of IEC 61918. EXAMPLE “Subclause A.4.4” in IEC 61784-5-14 means that CP 14/2 specifies the subclause 4.4 of IEC 61918. All main clauses of IEC 61918 are cited and apply in full unless otherwise stated in each normative installation profile annex. If all subclauses of a (s

46、ub)clause are omitted, then the corresponding IEC 61918 (sub)clause applies. If in a (sub)clause it is written “Not applicable.”, then the corresponding IEC 61918 (sub)clause does not apply. If in a (sub)clause it is written “Addition:”, then the corresponding IEC 61918 (sub)clause applies with the

47、additions written in the profile. If in a (sub)clause it is written “Replacement:”, then the text provided in the profile replaces the text of the corresponding IEC 61918 (sub)clause. NOTE A replacement can also comprise additions. If in a (sub)clause it is written “Modification:”, then the correspo

48、nding IEC 61918 (sub)clause applies with the modifications written in the profile. If all (sub)clauses of a (sub)clause are omitted but in this (sub)clause it is written “(Sub)clause has addition:” (or “replacement:”) or “(Sub)clause x is not applicable.”, then (sub)clause x becomes valid as declare

49、d and all the other corresponding IEC 61918 (sub)clauses apply. 6 Conformance to installation profiles Each installation profile within this standard includes part of IEC 61918:2013. It may also include defined additional specifications. A statement of compliance to an installation profile of this standard shall be stated2as either Compliance to IEC 61784-5-14:2013 3for CP 14/m or Compliance to IEC 61784-5-14 (Ed.2.0) for CP 14/m where the na