EN 61800-9-1-2017 en Adjustable speed electrical power drive systems - Part 9-1 Ecodesign for power drive systems motor starters power electronics and their driven applications - G.pdf

1、Adjustable speed electrical power drive systemsPart 9-1: Ecodesign for power drive systems, motor starters, power electronics and their driven applications General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA) and semi analy

2、tic model (SAM)BS EN 61800-9-1:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61800-9-1 June 2017 ICS 29.130.01; 29.160.30; 29.200 Supersedes EN 50598-1:2014 English Version Adjustable speed electrical power d

3、rive systems - Part 9-1: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA) and semi analytic model (SAM) (IEC 61800-9-1

4、:2017) Entranements lectriques de puissance vitesse variable - Partie 9-1: coconception des entranements lectriques de puissance, des dmarreurs de moteurs, de llectronique de puissance et de leurs applications entranes - Exigences gnrales pour dfinir les normes defficacit nergtique dun quipement ent

5、ran via lapproche produit tendu (EPA) et le modle semi-analytique (SAM) (IEC 61800-9-1:2017) Drehzahlvernderbare elektrische Antriebe - Teil 9-1: Energieeffizienz fr Antriebssysteme, Motorstarter, Leistungselektronik und deren angetriebene Einrichtungen - Allgemeine Anforderungen fr die Erstellung v

6、on Normen zur Energieeffizienz von Ausrstungen mit Elektroantrieb nach dem erweiterten Produktansatz (EPA) und semi-analytischen Modellen (SAM) (IEC 61800-9-1:2017) This European Standard was approved by CENELEC on 2017-04-07. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulat

7、ions which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC mem

8、ber. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versio

9、ns. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the

10、Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC

11、Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61800-9-1:2017 E National forewordThis British Standard is the UK implementation of EN 61800-9-1:2017. It is identical to IEC

12、61800-9-1:2017. It supersedes BS EN 50598-1:2014, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee PEL/22, Power electronics.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purp

13、ort to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 88323 1ICS 29.160.30; 29.200; 29.130.01Compliance with a British Standard cannot confer immunity

14、from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61800-9-1:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 6

15、1800-9-1 June 2017 ICS 29.130.01; 29.160.30; 29.200 Supersedes EN 50598-1:2014 English Version Adjustable speed electrical power drive systems - Part 9-1: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - General requirements for setting energy effi

16、ciency standards for power driven equipment using the extended product approach (EPA) and semi analytic model (SAM) (IEC 61800-9-1:2017) Entranements lectriques de puissance vitesse variable - Partie 9-1: coconception des entranements lectriques de puissance, des dmarreurs de moteurs, de llectroniqu

17、e de puissance et de leurs applications entranes - Exigences gnrales pour dfinir les normes defficacit nergtique dun quipement entran via lapproche produit tendu (EPA) et le modle semi-analytique (SAM) (IEC 61800-9-1:2017) Drehzahlvernderbare elektrische Antriebe - Teil 9-1: Energieeffizienz fr Antr

18、iebssysteme, Motorstarter, Leistungselektronik und deren angetriebene Einrichtungen - Allgemeine Anforderungen fr die Erstellung von Normen zur Energieeffizienz von Ausrstungen mit Elektroantrieb nach dem erweiterten Produktansatz (EPA) und semi-analytischen Modellen (SAM) (IEC 61800-9-1:2017) This

19、European Standard was approved by CENELEC on 2017-04-07. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical refer

20、ences concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a

21、 CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yug

22、oslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechn

23、ical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No.

24、 EN 61800-9-1:2017 E BS EN 61800-9-1:2017EN 61800-9-1:2017 2 European foreword The text of document 22G/348/FDIS, future edition 1 of IEC 61800-9-1, prepared by SC 22G “Adjustable speed electric drive systems incorporating semiconductor power converters“, of IEC/TC 22 “Power electronic systems and e

25、quipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61800-9-1:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-01-07 latest d

26、ate by which the national standards conflicting with the document have to be withdrawn (dow) 2020-04-07 This document supersedes EN 50598-1:2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsibl

27、e for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61800-9-1:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards ind

28、icated: IEC 60034-1 NOTE Harmonized as EN 60034-1. IEC 60034-2-2 NOTE Harmonized as EN 60034-2-2. IEC 60034-30-1 NOTE Harmonized as EN 60034-30-1. IEC 60947-4-1 NOTE Harmonized as EN 60947-4-1. IEC 60947-4-2 NOTE Harmonized as EN 60947-4-2. BS EN 61800-9-1:2017EN 61800-9-1:2017 2 European foreword T

29、he text of document 22G/348/FDIS, future edition 1 of IEC 61800-9-1, prepared by SC 22G “Adjustable speed electric drive systems incorporating semiconductor power converters“, of IEC/TC 22 “Power electronic systems and equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC

30、 as EN 61800-9-1:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-01-07 latest date by which the national standards conflicting with the document have to be wit

31、hdrawn (dow) 2020-04-07 This document supersedes EN 50598-1:2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of

32、the International Standard IEC 61800-9-1:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60034-1 NOTE Harmonized as EN 60034-1. IEC 60034-2-2 NOTE Harmonized

33、 as EN 60034-2-2. IEC 60034-30-1 NOTE Harmonized as EN 60034-30-1. IEC 60947-4-1 NOTE Harmonized as EN 60947-4-1. IEC 60947-4-2 NOTE Harmonized as EN 60947-4-2. EN 61800-9-1:2017 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications

34、The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1

35、When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60

36、050-161 - International Electrotechnical Vocabulary (IEV) - Chapter 161: Electromagnetic compatibility - - IEC 60034-2-1 2014 Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) EN 60034-2-1 2014 IEC/TS

37、 60034-2-3 - Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC induction motors - - IEC 61800-9-2 2017 Adjustable speed electrical power drive systems - Part 9-2: Ecodesign for power drive systems, motor starters, power electroni

38、cs and their driven applications - Energy efficiency indicators for power drive systems and motor starters EN 61800-9-2 2017 BS EN 61800-9-1:2017This page deliberately left blank 2 IEC 61800-9-1:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 8 2 Normative references 8 3 Terms, definiti

39、ons and symbols 9 3.1 Terms and definitions 9 3.2 Symbols 10 4 Requirements for the development of energy efficiency standards for extended products 12 4.1 General . 12 4.2 Responsibility of the extended product standard or technical committee . 13 4.3 Elements to achieve the extended product approa

40、ch 14 5 Requirements for the semi analytic model (SAM) of the extended product . 15 6 Requirements for the semi analytic model (SAM) of the motor system . 16 6.1 General . 16 6.2 Operating points of the PDS 16 6.3 Requirements if the motor system contains no CDM . 17 7 Merging the semi analytic mode

41、ls (SAMs) to the extended product approach 17 7.1 General . 17 7.2 Speed versus torque loss points of a motor system . 18 7.3 How to determine intermediate speed versus torque loss points of a motor system 19 7.3.1 General . 19 7.3.2 Loss determination by maximum losses of neighboured loss points .

42、20 7.3.3 Loss determination by two-dimensional interpolation of losses of neighboured loss points . 20 Annex A (informative) Example how to apply the SAM in the EPA for pump systems with a required speed versus torque loss points using the PDS . 22 Annex B (informative) Calculation of the energy con

43、sumption based on the duty profile . 24 Annex C (informative) Basic torque and power vs. speed profiles, operating points over time 25 C.1 General . 25 C.2 Basic torque and power vs. speed profiles 25 C.3 Operating points over time 26 C.4 Definition of the operating points over time . 26 C.4.1 Gener

44、al . 26 C.4.2 Calculation of the energy consumption based on the operating points over time . 27 C.4.3 Example of loss calculation for different operating points over time . 28 Bibliography 31 Figure 1 Illustration of core requirements of energy efficiency standardization 6 Figure 2 Illustration of

45、the extended product with embedded motor system 9 Figure 3 Stakeholders and responsibilities for determination of the energy efficiency indicator for an extended product 13 Figure 4 Illustration of the operating points (shaft speed, torque) for the determination of relative losses of the power drive

46、 system (PDS) . 17 2 IEC 61800-9-1:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 8 2 Normative references 8 3 Terms, definitions and symbols 9 3.1 Terms and definitions 9 3.2 Symbols 10 4 Requirements for the development of energy efficiency standards for extended products 12 4.1 Gene

47、ral . 12 4.2 Responsibility of the extended product standard or technical committee . 13 4.3 Elements to achieve the extended product approach 14 5 Requirements for the semi analytic model (SAM) of the extended product . 15 6 Requirements for the semi analytic model (SAM) of the motor system . 16 6.

48、1 General . 16 6.2 Operating points of the PDS 16 6.3 Requirements if the motor system contains no CDM . 17 7 Merging the semi analytic models (SAMs) to the extended product approach 17 7.1 General . 17 7.2 Speed versus torque loss points of a motor system . 18 7.3 How to determine intermediate spee

49、d versus torque loss points of a motor system 19 7.3.1 General . 19 7.3.2 Loss determination by maximum losses of neighboured loss points . 20 7.3.3 Loss determination by two-dimensional interpolation of losses of neighboured loss points . 20 Annex A (informative) Example how to apply the SAM in the EPA for pump systems with a required speed versus torque loss points using the PDS . 22 Annex B (informative) Calculation of the energy consumption based on the duty profile . 24