EN 61850-7-410-2013 en Communication networks and systems for power utility automation - Part 7-410 Basic communication structure - Hydroelectric power plants - Communication for m.pdf

1、BSI Standards PublicationCommunication networks and systems for power utility automationPart 7-410: Basic communication structure Hydroelectric power plants Communication for monitoring and controlBS EN 61850-7-410:2013BS EN 61850-7-410:2013+A1:2016EUROPEAN STANDARDEN 61850-7-410NORME EUROPENNEEUROP

2、ISCHE NORMJanuary 2013CENELECEuropean Committee for Electrotechnical StandardizationComit Europen de Normalisation ElectrotechniqueEuropisches Komitee fr Elektrotechnische NormungManagement Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitation in any form and by any m

3、eans reserved worldwide for CENELEC members.Ref. No. EN 61850-7-410:2013 EICS 33.200 Supersedes EN 61850-7-410:2007English versionCommunication networks and systems for power utility automation -Part 7-410: Basic communication structure -Hydroelectric power plants - Communication for monitoring and

4、control(IEC 61850-7-410:2012)Rseaux et systmes de communicationpour lautomatisationdes systmes lectriques - Partie 7-410: Structurede communication de base - Centrales hydrolectriques - Communication pour le contrle-commande(CEI 61850-7-410:2012)Kommunikationsnetze und -systeme frdie Automatisierung

5、 in der elektrischenEnergieversorgung - Teil 7-410: Wasserkraftwerke - Kommunikation fr berwachung,Regelung und Steuerung(IEC 61850-7-410:2012)This European Standard was approved by CENELEC on 2012-12-04. CENELEC members are bound to complywith the CEN/CENELEC Internal Regulations which stipulate th

6、e conditions for giving this European Standardthe status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained onapplication to the CEN-CENELEC Management Centre or to any CENELEC member.This European Standard

7、 exists in three official versions (English, French, German). A version in any otherlanguage made by translation under the responsibility of a CENELEC member into its own language and notifiedto the CEN-CENELEC Management Centre has the same status as the official versions.CENELEC members are the na

8、tional electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,Port

9、ugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.BS EN 61850-7-410:2013BS EN 61850-7-410:2013+A1:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 61850-7-410:2013+A1:2016. It is identical to IEC 61850-7-410:2012, i

10、ncorporating amendment 1:2015. It supersedes BS EN 61850-7-410:2013, which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text altered by IEC amendm

11、ent 1 is indicated by .The UK participation in its preparation was entrusted to Technical Committee PEL/57, Power systems management and associated information exchange.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport

12、 to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016ISBN 978 0 580 84068 5ICS 33.200Compliance with a British Standard cannot confer immunity from legal obligations.T

13、his British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2013.Amendments/corrigenda issued since publicationDate Text affected31 March 2016 Implementation of IEC amendment 1:2015 with CENELEC endorsement A1:2016EUROPEAN STANDARD EN 61850-7-410

14、 NORME EUROPENNE EUROPISCHE NORM January 2013CENELEC European Committee for Electrotechnical StandardizationComit Europen de Normalisation ElectrotechniqueEuropisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitation

15、 in any form and by any means reserved worldwide for CENELEC members.Ref. No. EN 61850-7-410:2013 E ICS 33.200 Supersedes EN 61850-7-410:2007 English version Communication networks and systems for power utility automation - Part 7-410: Basic communication structure - Hydroelectric power plants - Com

16、munication for monitoring and control(IEC 61850-7-410:2012) Rseaux et systmes de communicationpour lautomatisation des systmes lectriques - Partie 7-410: Structure de communication de base - Centrales hydrolectriques - Communication pour le contrle-commande (CEI 61850-7-410:2012) Kommunikationsnetze

17、 und -systeme frdie Automatisierung in der elektrischenEnergieversorgung - Teil 7-410: Wasserkraftwerke - Kommunikation fr berwachung,Regelung und Steuerung (IEC 61850-7-410:2012) This European Standard was approved by CENELEC on 2012-12-04. CENELEC members are bound to complywith the CEN/CENELEC In

18、ternal Regulations which stipulate the conditions for giving this European Standardthe status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained onapplication to the CEN-CENELEC Management Centre or to any

19、 CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any otherlanguage made by translation under the responsibility of a CENELEC member into its own language and notifiedto the CEN-CENELEC Management Centre has the same status as the offic

20、ial versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Mal

21、ta, the Netherlands, Norway, Poland,Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 61850-7-410:2013EN 61850-7-410:2013+A1February 2016- 2 - Foreword The text of document 57/1274/FDIS, future edition 2 of IEC 61850-7-410, prepared by IEC TC 57

22、“Power systems management and associated information exchange“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61850-7-410:2013. The following dates are fixed: latest date by which the document hasto be implemented at national level bypublication of an identical national

23、standard or by endorsement(dop) 2013-09-04 latest date by which the nationalstandards conflicting with thedocument have to be withdrawn(dow) 2015-12-04 This document supersedes EN 61850-7-410:2007. EN 61850-7-410:2013 includes the following significant technical changes with respect to EN 61850-7-41

24、0:2007: a) The logical nodes in EN 61850-7-410:2007 that were not specific to hydropower plants have beentransferred to EN 61850-7-4:2010 and have been removed from this edition of EN 61850-7-410. b) The definitions of logical nodes in this edition of EN 61850-7-410 have been updated using the forma

25、tintroduced in EN 61850-7-4:2010. c) Most of the modelling examples and background information that was included in EN 61850-7-410:2007 has been transferred to IEC/TR 61850-7-510. d) However, this edition of EN 61850-7-410 includes additional general-purpose logical nodes that werenot included in EN

26、 61850-7-4:2010, but are required in order to represent the complete control and monitoring system of a hydropower plant. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identif

27、ying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61850-7-410:2012 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC

28、 61362 NOTE Harmonized as EN 61362. IEC 61850-10 NOTE Harmonized as EN 61850-10. IEC 61970-301 NOTE Harmonized as EN 61970-301. IEC 62270 NOTE Harmonized as EN 62270. BS EN 61850-7-410:2013+A1:2016EN 61850-7-410:2013+A1:2016- 3 - Annex ZA (normative) Normative references to international publication

29、s with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced doc

30、ument (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC/TS 61850-2 - Communication networks and systems in substations - Part 2: Glossary - - IEC

31、61850-7-1 - Communication networks and systems for power utility automation - Part 7-1: Basic communication structure - Principles and models EN 61850-7-1 - IEC 61850-7-2 2010 Communication networks and systems for power utility automation - Part 7-2: Basic information and communication structure -

32、Abstract communication service interface (ACSI) EN 61850-7-22010 IEC 61850-7-3 2010 Communication networks and systems for power utility automation - Part 7-3: Basic communication structure - Common data classes EN 61850-7-32011 IEC 61850-7-4 2010 Communication networks and systems for power utility

33、 automation - Part 7-4: Basic communication structure - Compatible logical node classes and data object classes EN 61850-7-42010 BS EN 61850-7-410:2013+A1:201661850-7-410 IEC:2012+A1:2015 4 BS EN 61850-7-410:2013+A1:2016EN 61850-7-410:2013+A1:2016Foreword to amendment A1EN 61850-7-410:2013/A1:20162E

34、uropean forewordThe text of document 57/1607/FDIS, future IEC 61850-7-410:2012/A1, prepared by IEC/TC 57 “Power systems management and associated information exchange“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61850-7-410:2013/A1:2016. The following dates are fixed

35、: latest date by which the document has to be implemented atnational level by publication of an identical nationalstandard or by endorsement(dop) 2016-09-17 latest date by which the national standards conflicting withthe document have to be withdrawn(dow) 2018-12-17 Attention is drawn to the possibi

36、lity that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade

37、 Association. Endorsement notice The text of the International Standard IEC 61850-7-410:2012/A1:2015 was approved by CENELEC as a European Standard without any modification. 2 IEC 61850-7-410:2012+AMD1:2015 CSV IEC 2015CONTENTS FOREWORD . 5 1 Scope . 7 2 Normative references . 7 3 Terms and definiti

38、ons . 7 4 Abbreviated terms 7 5 Logical node classes 9 5.1 Logical node groups 9 5.2 Interpretation of logical node tables . 9 5.3 Summary of logical nodes groups to be used in power plants 11 5.3.1 General . 11 5.3.2 Group A Automatic functions 11 5.3.3 Group F Functional blocks 11 5.3.4 Group H Hy

39、dropower specific logical nodes 12 5.3.5 Group I Interface and archiving . 13 5.3.6 Group K Mechanical and non-electrical primary equipment . 13 5.3.7 Group P Protection functions 13 5.3.8 Group R Protection related functions 14 5.3.9 Group S Supervision and monitoring . 14 5.3.10 Group X Switchgear

40、 14 5.3.11 Group E Thermal power plant specific logical nodes (“Enthalpy”) 11 5.3.12 Group G Logical nodes for general purposes 12 5.3.13 Group T Transducers and instrument transformers . 14 5.4 Automatic control logical nodes LN group A . 14 5.4.1 Modelling remarks . 14 5.4.2 LN: Control mode selec

41、tion Name: ACTM 14 5.4.3 LN: Joint control Name: AJCL 15 5.4.4 LN: PSS 4B filter function Name: APSF . 15 5.4.5 LN: PSS control, common information Name: APSS . 17 5.4.6 LN: PSS 2A/B filter function Name: APST . 18 5.13 Logical nodes for thermal power LN group E . 18 5.13.1 LN: Block coordination fu

42、nction Name: EBCF . 18 5.13.2 LN: Fuel Control Valve Name: EFCV . 19 5.13.3 LN Gas turbine unit Name: EGTU . 19 5.13.4 LN: Steam Control Valve Name: ESCV 20 5.13.5 LN: Speed monitoring Name: ESPD 21 5.13.6 LN Steam turbine unit Name: ESTU 21 5.5 Logical nodes for functional blocks LN Group F 22 5.5.

43、1 Modelling remarks . 22 5.5.2 LN: Functional heartbeat Name: FHBT . 24 5.5.3 LN: Scheduler Name: FSCH 24 5.5.4 LN: Functional priority status Name: FXPS 24 5.5.5 LN: Deadband filter Name: FDBF 22 5.5.6 LN: Trip Matrix Name: FMTX . 23 5.6 Hydropower specific logical nodes LN group H . 25 5.6.1 Model

44、ling remarks . 25 5.6.2 LN: Turbine generator shaft bearing Name: HBRG 25 BS EN 61850-7-410:2013+A1:201661850-7-410 IEC:2012+A1:2015 5 EN 61850-7-410:2013/A1:20162European forewordThe text of document 57/1607/FDIS, future IEC 61850-7-410:2012/A1, prepared by IEC/TC 57 “Powersystems management and as

45、sociated information exchange“ was submitted to the IEC-CENELECparallel vote and approved by CENELEC as EN 61850-7-410:2013/A1:2016.The following dates are fixed: latest date by which the document has to be implemented atnational level by publication of an identical nationalstandard or by endorsemen

46、t(dop) 2016-09-17 latest date by which the national standards conflicting with the document have to be withdrawn(dow) 2018-12-17Attention is drawn to the possibility that some of the elements of this document may be the subject ofpatent rights. CENELEC and/or CEN shall not be held responsible for id

47、entifying any or all such patent rights.This document has been prepared under a mandate given to CENELEC by the European Commissionand the European Free Trade Association.Endorsement noticeThe text of the International Standard IEC 61850-7-410:2012/A1:2015 was approved by CENELEC asa European Standa

48、rd without any modification.299991111111313131314151515151616131416161617171719202020212222232424242425272727262626IEC 61850-7-410:2012+AMD1:2015 CSV 3 IEC 2015 5.6.3 LN: Combinator Name: HCOM . 26 5.6.4 LN: Hydropower dam Name: HDAM 26 5.6.5 LN: Deflector control Name: HDFL . 26 5.6.6 LN: Dam leaka

49、ge supervision Name: HDLS . 27 5.6.7 LN: Electrical brake Name: HEBR 27 5.6.8 LN: Governor control mode Name: HGOV 27 5.6.9 LN: Gate position indicator Name: HGPI 28 5.6.10 LN: Dam gate Name: HGTE . 28 5.6.11 LN: Intake gate Name: HITG . 29 5.6.12 LN: Joint control Name: HJCL . 29 5.6.13 LN: Leakage supervision Name: HLKG . 30 5.6.14 LN: Water level indicator Name: HLVL 30 5.6.15 LN: Mechanical brake Name: HMBR . 31 5.6.