EN 61850-9-2-2011 en Communication networks and systems for power utility automation - Part 9-2 Specific communication service mapping (SCSM) - Sampled values over ISO IEC 8802-3《公.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationCommunication networks and systems for power utilityautomationPart 9-2 Specific communication service mapping (SCSM) Sampled values over ISO/IEC 8802-3BS EN 61850-9-2:2011Nationa

2、l forewordThis British Standard is the UK implementation of EN 61850-9-2:2011. It isidentical to IEC 61850-9-2:2011. It supersedes BS EN 61850-9-2:2004 whichis withdrawn.The UK participation in its preparation was entrusted to Technical CommitteePEL/57, Power systems management and associated inform

3、ation exchange.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. The British Standards Institution 2012Published b

4、y BSI Standards Limited 2012ISBN 978 0 580 56433 8ICS 33.200 Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 29 February 2012.Amendments issued since publicationAm

5、d. No. Date Text affectedBRITISH STANDARDBS EN 61850-9-2:2011EUROPEAN STANDARD EN 61850-9-2 NORME EUROPENNE EUROPISCHE NORM December 2011 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung M

6、anagement Centre: Avenue Marnix 17, B - 1000 Brussels 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61850-9-2:2011 E ICS 33.200 Supersedes EN 61850-9-2:2004English version Communication networks and systems for power utilit

7、y automation - Part 9-2: Specific communication service mapping (SCSM) - Sampled values over ISO/IEC 8802-3 (IEC 61850-9-2:2011) Rseaux et systmes de communication pour lautomatisation des systmes lectriques - Partie 9-2: Mise en correspondance des services de communication spcifiques (SCSM) - Valeu

8、rs chantillonnes sur lISO/CEI 8802-3 (CEI 61850-9-2:2011) Kommunikationsnetze und -systeme fr die Automatisierung in der elektrischen Energieversorgung - Teil 9-2: Spezifische Abbildung von Kommunikationsdiensten (SCSM) - Abgetastete Werte ber ISO/IEC 8802-3 (IEC 61850-9-2:2011) This European Standa

9、rd was approved by CENELEC on 2011-10-27. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concernin

10、g such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member

11、 into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,

12、Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 61850-9-2:2011EN 61850-9-2:2011 - 2 - Foreword The text of document 57/1133/FDIS, future edition 2

13、of IEC 61850-9-2, prepared by IEC/TC 57 “Power systems management and associated information exchange“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61850-9-2:2011. The following dates are fixed: latest date by which the document has to be implemented at national level

14、 by publication of an identical national standard or by endorsement (dop) 2012-07-27 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2014-10-27 This document supersedes EN 61850-9-2:2004. EN 61850-9-2:2011 includes the following significant techni

15、cal changes with respect to EN 61850-9-2:2004: addition of an optional Link redundancy layer (Tables 3 to 6); redefinition of “reserved” fields in link layer (5.3.3.4); evolution of USVCB and MSVCB components (Tables 9, 10, 12); evolution of encoding for the transmission of the sampled value buffer

16、(Table 14). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61850-9-2:20

17、11 was approved by CENELEC as a European Standard without any modification. BS EN 61850-9-2:2011- 3 - EN 61850-9-2:2011 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the

18、application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the rele

19、vant EN/HD applies. Publication Year Title EN/HD Year IEC 60874-10-1 - Connectors for optical fibres and cables - Part 10-1: Detail specification for fibre optic connector type BFOC/2,5 terminated to multimode fibre type A1 - - IEC 60874-10-2 - Connectors for optical fibres and cables - Part 10-2: D

20、etail specification for fibre optic connector type BFOC/2,5 terminated to single-mode fibre type B1 - - IEC 60874-10-3 - Connectors for optical fibres and cables - Part 10-3: Detail specification for fibre optic adaptor type BFOC/2,5 for single and multimode fibre - - IEC/TR 61850-1 - Communication

21、networks and systems in substations - Part 1: Introduction and overview - - IEC/TS 61850-2 - Communication networks and systems in substations - Part 2: Glossary - - IEC 61850-6 - Communication networks and systems for power utility automation - Part 6: Configuration description language for communi

22、cation in electrical substations related to IEDs EN 61850-6 - IEC 61850-7-1 - Communication networks and systems for power utility automation - Part 7-1: Basic communication structure - Principles and models EN 61850-7-1 - IEC 61850-7-2 - Communication networks and systems for power utility automati

23、on - Part 7-2: Basic information and communication structure - Abstract communication service interface (ACSI) EN 61850-7-2 - IEC 61850-7-3 - Communication networks and systems for power utility automation - Part 7-3: Basic communication structure - Common data classes EN 61850-7-3 - IEC 61850-7-4 -

24、 Communication networks and systems for power utility automation - Part 7-4: Basic communication structure - Compatible logical node classes and data object classes EN 61850-7-4 - BS EN 61850-9-2:2011EN 61850-9-2:2011 - 4 - Publication Year Title EN/HD Year IEC 61850-8-1 - Communication networks and

25、 systems for power utility automation - Part 8-1: Specific Communication Service Mapping (SCSM) - Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3 EN 61850-8-1 - IEC/TS 62351-6 - Power systems management and associated information exchange - Data and communications security - Part 6

26、: Security for IEC 61850 - - IEC 62439-3 + A1 2010 201X1)Industrial communication networks - High availability automation networks - Part 3: Parallel Redundancy Protocol (PRP) and High availability Seamless Redundancy (HSR) EN 62439-3 + A1 2010 201X1)ISO/IEC 7498-1 1994 Information technology - Open

27、 Systems Interconnection - Basic Reference Model: The Basic Model - - ISO/IEC 8326 1996 Information technology - Open systems Interconnection - Session service definition - - ISO/IEC 8327-1 1996 Information technology - Open Systems Interconnection - Connection-oriented Session protocol: Protocol sp

28、ecification - - ISO/IEC 8649 1996 Information technology - Open systems interconnection - Service definition for the Association Control Service Element (ACSE) - - ISO/IEC 8650-1 1996 Information technology - Open systems interconnection - Connection-oriented protocol for the association control ser

29、vice element: Protocol specification - - ISO/IEC 8802-3 2000 Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method an

30、d physical layer specifications - - ISO/IEC 8822 1994 Information technology - Open Systems Interconnection - Presentation service definition - - ISO/IEC 8823-1 1994 Information technology - Open Systems Interconnection -Connec tion-orien ted presen ta tion pro tocol: Pro tocol speci fica tion - - I

31、SO/IEC 8824-1 2008 Information technology - Abstract Syntax Notation One (ASN.1): Specification of basic notation - - ISO/IEC 8825-1 - Information technology - ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER) - -

32、 1)To be published. BS EN 61850-9-2:2011- 5 - EN 61850-9-2:2011 Publication Year Title EN/HD Year ISO 9506-1 2003 Industrial automation systems - Manufacturing Message Specification - Part 1: Service definition - - ISO 9506-2 2003 Industrial automation systems - Manufacturing Message Specification -

33、 Part 2: Protocol specification - - IEEE 754 1985 Binary Floating-Point Arithmetic (R1990) - - IEEE 802.1Q 1998 IEEE Standard for Local and Metropolitan Area Networks: Virtual Bridged Local Area Networks - - IETF RFC 791 - Internet Protocol - DARPA Internet Program Protocol Specification - - IETF RF

34、C 792 - Internet Control Message Protocol - - IETF RFC 793 - Transmission Control Protocol - DARPA Internet Program Protocol Specification - - IETF RFC 826 - Ethernet Address Resolution Protocol - - IETF RFC 894 - Standard for the Transmission of IP Datagrams over Ethernet Networks - - IETC RFC 919

35、- Broadcasting Internet Datagrams - - IETF RFC 1006 - ISO transport services on top of TCP: Version 3 - - IETF RFC 1112 - Host Extensions for IP Multicasting - - BS EN 61850-9-2:2011 2 61850-9-2 IEC:2011 CONTENTS INTRODUCTION . 6 1 Scope . 7 2 Normative references 7 3 Terms and definitions . 9 4 Abb

36、reviations 9 5 Communication stack 10 5.1 Overview of the protocol usage 10 5.2 Client/server services and communication profiles . 11 5.2.1 Client/server services 11 5.2.2 A-Profile 12 5.2.3 TCP/IP T-Profile 13 5.3 SV service and communication profile 13 5.3.1 SV mapping overview . 13 5.3.2 A-Profi

37、le 14 5.3.3 T-Profile 14 5.4 Restrictions . 17 6 Mapping of IEC 61850-7-2 and IEC 61850-7-3 data attributes . 17 7 Mapping of IEC 61850-7-2 classes and services . 17 7.1 Classes of SV data sets . 17 7.2 Definition of SV data sets . 17 8 Mapping of the model for the transmission of sampled values . 1

38、8 8.1 Overview . 18 8.2 Mapping of the multicast sampled value control block class and services . 18 8.2.1 Multicast sampled value control block definition . 18 8.2.2 MSV Services . 19 8.3 Mapping of the unicast sampled value control block class and services 20 8.3.1 Unicast sampled value control bl

39、ock definition 20 8.3.2 USV Services . 21 8.4 Mapping of the update of the sampled value buffer. 21 8.5 Additional definitions for the transmission of sampled values 21 8.5.1 Application layer functionality . 21 8.5.2 Presentation layer functionality . 22 8.6 Definitions for basic data types Present

40、ation layer functionality . 24 9 Conformance 24 9.1 Notation . 24 9.2 PICS 24 9.2.1 Profile conformance . 24 9.2.2 SV Services . 25 10 Substation configuration language (SCL) . 25 11 SCSM specific address element definitions . 26 Annex A (informative) ISO/IEC 8802-3 frame format and ASN.1 basic enco

41、ding rules 27 Annex B (informative) Multicast address selection 32 BS EN 61850-9-2:201161850-9-2 IEC:2011 3 Figure 1 OSI reference model and profiles 11 Figure 2 Structure of the tag header . 15 Figure 3 Reserved 1 . 16 Figure 4 Concatenation of several ASDUs into one frame 22 Figure A.1 ISO/IEC 880

42、2-3 frame format No link redundancy . 27 Figure A.2 ISO/IEC 8802-3 frame format Link redundancy: HSR 28 Figure A.3 ISO/IEC 8802-3 frame format Link redundancy: PRP 29 Figure A.4 Basic encoding rules format 30 Figure A.5 Format of the tag octets 30 Figure A.6 Example for an ASN.1 coded APDU frame str

43、ucture 31 Table 1 Service requiring client/server communication profile . 12 Table 2 Service and protocols for client/server communication A-Profile . 12 Table 3 Service and protocols for peer TCP/IP T-Profile . 13 Table 4 Service requiring SV communication profile 13 Table 5 Service and protocols f

44、or SV communication A-Profile 14 Table 6 SV T-Profile . 14 Table 7 Default Virtual LAN IDs and priorities 15 Table 8 Assigned Ethertype values . 16 Table 9 MMS TypeDescription definition for MSVCB MMS structure . 18 Table 10 DstAddress structure . 19 Table 11 Mapping of multicast sampled value servi

45、ces . 19 Table 12 MMS TypeDescription definition for USVCB MMS structure . 20 Table 13 Mapping of unicast sampled value services 21 Table 14 Encoding for the transmission of the sampled value buffer . 22 Table 15 Encoding for the basic data types . 24 Table 16 PICS for A-Profile support . 25 Table 1

46、7 PICS for T-Profile support . 25 Table 18 SV conformance statement . 25 Table 19 Definitions for SV SCL 26 Table B.1 Recommended multicast addressing example . 32 BS EN 61850-9-2:2011 6 61850-9-2 IEC:2011 INTRODUCTION This part of IEC 61850 defines the SCSM for sampled values over ISO/IEC 8802-3. T

47、he intent of this SCSM definition is to include the complete mapping of the sampled value model. This part of IEC 61850 applies to electronic current and voltage transformers (ECT and EVT having a digital output), merging units, and intelligent electronic devices, for example protection units, bay c

48、ontrollers and meters, or sensors. Process bus communication structures can be arranged in different ways as described in IEC/TR 61850-1. In addition to the transmission of sampled value data sets, which are directly connected to ISO/IEC 8802-3, a selection of IEC 61850-8-1 services is necessary to

49、support the access to the SV control block. References to the relevant IEC 61850-8-1 services are provided in this SCSM. For less complex devices (for example merging units), the sampled value control block can be pre-configured, in which case there is no need to implement IEC 61850-8-1 services based on the MMS-Stack. This document defines the mapping of sampled value class model (IEC 61850-7-2) to ISO/IEC 8802-3. This SCSM, in combination with IEC 61850-7 and I