EN 61970-452-2015 en Energy management system application program interface (EMS-API) - Part 452 CIM model exchange specification.pdf

1、BSI Standards PublicationEnergy management system application program interface(EMS-API)Part 452: CIM model exchange specificationBS EN 61970-452:2015National forewordThis British Standard is the UK implementation of EN 61970-452:2015. It is identical to IEC 61970-452:2015. It supersedes BS EN 61970

2、-452:2013 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee PEL/57, Power systems management and associated information exchange.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not pur

3、port to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 87383 6ICS 33.200Compliance with a British Standard cannot confer immunity fromlegal obligations.

4、This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 June 2015.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61970-452:2015EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 61970-452 May 2015 ICS 33.200 Su

5、persedes EN 61970-452:2013 English Version Energy management system application program interface (EMS-API) - Part 452: CIM model exchange specification (IEC 61970-452:2015) Interface de programmation dapplication pour systme degestion dnergie (EMS-API) - Partie 452 : spcificationdchange de modle CI

6、M (IEC 61970-452:2015) Schnittstelle fr Anwendungsprogramme frNetzfhrungssysteme (EMS-API) - Teil 452: CIMAustauschformat Spezifikation (IEC 61970-452:2015) This European Standard was approved by CENELEC on 2015-05-14. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations whi

7、ch stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This

8、 European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.CENELE

9、C members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherland

10、s, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation ElectrotechniqueEuropisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre:

11、Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61970-452:2015 E EN 61970-452:2015 2 Foreword The text of document 57/1451/CDV, future edition 2 of IEC 61970-452, prepared by IEC/TC 57 “Power s

12、ystems management and associated information exchange“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61970-452:2015. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standar

13、d or by endorsement (dop) 2016-02-14 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-05-14 This document supersedes EN 61970-452:2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of pate

14、nt rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61970-452:2015 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography,

15、the following notes have to be added for the standards indicated: IEC 61970-1 NOTE Harmonized as EN 61970-1. IEC TS 61970-2 NOTE Harmonized as CLC/TS 61970-2. IEC 61970-552 NOTE Harmonized as EN 61970-552. BS EN 61970-452:2015EN 61970-452:2015 3 Annex ZA (normative) Normative references to internati

16、onal publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of th

17、e referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is availab

18、le here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61970-301 2013 Energy management system application program interface (EMS-API) - Part 301: Common information model (CIM) base EN 61970-301 2014 IEC 61970-501 - Energy management system application program interface (EMS-API) - Part 501

19、: Common Information Model Resource Description Framework (CIM RDF) schema EN 61970-501 - BS EN 61970-452:2015 2 IEC 61970-452:2015 IEC 2015 CONTENTS FOREWORD . 6 INTRODUCTION . 9 1 Scope 10 2 Normative references 11 3 Overview of data requirements 11 3.1 Overview. 11 3.2 General requirements . 11 3

20、.3 Transformer modeling . 12 3.4 Modeling authorities 13 3.5 Use of measurement classes 14 3.5.1 General . 14 3.5.2 ICCP data exchange 15 3.6 Voltage or active power regulation 15 3.7 Use of curves 15 3.7.1 General . 15 3.7.2 Generating unit reactive power limits . 15 3.8 Definition of schedules 16

21、4 CIM Equipment Profile . 16 4.1 CIM Equipment Profile General . 16 4.2 Concrete Classes 16 4.2.1 Accumulator 16 4.2.2 AccumulatorValue 17 4.2.3 ACLineSegment . 17 4.2.4 ActivePowerLimit . 19 4.2.5 Analog . 19 4.2.6 AnalogValue 20 4.2.7 ApparentPowerLimit 20 4.2.8 BaseVoltage 20 4.2.9 Bay 21 4.2.10

22、Breaker 21 4.2.11 BusbarSection . 21 4.2.12 ConformLoad . 22 4.2.13 ConformLoadGroup . 22 4.2.14 ConformLoadSchedule 23 4.2.15 ConnectivityNode 23 4.2.16 ControlArea . 24 4.2.17 ControlAreaGeneratingUnit 24 4.2.18 CurrentLimit . 25 4.2.19 CurveData . 25 4.2.20 DayType 26 4.2.21 Disconnector . 26 4.2

23、.22 Discrete . 26 4.2.23 DiscreteValue 27 4.2.24 EnergyConsumer . 27 4.2.25 EquivalentBranch 28 4.2.26 EquivalentInjection 29 BS EN 61970-452:2015IEC 61970-452:2015 IEC 2015 3 4.2.27 EquivalentNetwork . 30 4.2.28 EquivalentShunt 30 4.2.29 FossilFuel 30 4.2.30 GeneratingUnit 31 4.2.31 GeographicalReg

24、ion 33 4.2.32 GrossToNetActivePowerCurve . 33 4.2.33 HydroGeneratingUnit . 34 4.2.34 HydroPump 34 4.2.35 IEC61970CIMVersion 35 4.2.36 Line . 35 4.2.37 LoadArea . 35 4.2.38 LoadBreakSwitch . 36 4.2.39 LoadResponseCharacteristic . 36 4.2.40 MeasurementValueSource . 38 4.2.41 MutualCoupling 38 4.2.42 N

25、ame . 39 4.2.43 NameType . 40 4.2.44 NonConformLoad. 40 4.2.45 NonConformLoadGroup . 41 4.2.46 NonConformLoadSchedule 41 4.2.47 NuclearGeneratingUnit 42 4.2.48 OperationalLimitSet . 42 4.2.49 OperationalLimitType . 43 4.2.50 PhaseTapChangerAsymetrical . 43 4.2.51 PhaseTapChangerLinear . 44 4.2.52 Ph

26、aseTapChangerSymetrical . 45 4.2.53 PhaseTapChangerTabular . 46 4.2.54 PhaseTapChangerTabularPoint . 46 4.2.55 PowerTransformer . 48 4.2.56 PowerTransformerEnd . 48 4.2.57 RatioTapChanger 50 4.2.58 RatioTapChangerTabular . 51 4.2.59 RatioTapChangerTabularPoint . 51 4.2.60 ReactiveCapabilityCurve 52

27、4.2.61 RegularTimePoint 53 4.2.62 RegulatingControl 54 4.2.63 RegulationSchedule . 55 4.2.64 Season 56 4.2.65 SeriesCompensator . 56 4.2.66 ShuntCompensator 56 4.2.67 StaticVarCompensator . 57 4.2.68 StationSupply 58 4.2.69 SubGeographicalRegion 59 4.2.70 SubLoadArea . 59 4.2.71 Substation . 59 4.2.

28、72 Switch . 60 4.2.73 SwitchSchedule . 60 4.2.74 SynchronousMachine. 61 4.2.75 TapChangerControl . 63 BS EN 61970-452:2015 4 IEC 61970-452:2015 IEC 2015 4.2.76 TapSchedule . 63 4.2.77 Terminal 64 4.2.78 ThermalGeneratingUnit 64 4.2.79 TieFlow 65 4.2.80 VoltageLevel 65 4.2.81 VoltageLimit 66 4.2.82 W

29、indGeneratingUnit 66 4.3 Abstract Classes . 67 4.3.1 BasicIntervalSchedule . 67 4.3.2 ConductingEquipment 67 4.3.3 Conductor 68 4.3.4 ConnectivityNodeContainer . 68 4.3.5 Curve 68 4.3.6 EnergyArea . 69 4.3.7 Equipment . 69 4.3.8 EquipmentContainer 70 4.3.9 EquivalentEquipment . 70 4.3.10 IdentifiedO

30、bject . 70 4.3.11 LoadGroup 71 4.3.12 Measurement . 71 4.3.13 MeasurementValue 72 4.3.14 OperationalLimit 73 4.3.15 PhaseTapChanger . 73 4.3.16 PhaseTapChangerNonLinear . 73 4.3.17 PowerSystemResource 74 4.3.18 RegularIntervalSchedule 74 4.3.19 RegulatingCondEq . 75 4.3.20 RotatingMachine 75 4.3.21

31、SeasonDayTypeSchedule 76 4.3.22 TapChanger. 76 4.3.23 TransformerEnd . 77 4.4 Enumerations 78 4.4.1 ControlAreaTypeKind . 78 4.4.2 CurveStyle . 78 4.4.3 FuelType . 79 4.4.4 GeneratorControlSource 79 4.4.5 OperationalLimitDirectionKind 79 4.4.6 RegulatingControlModeKind 80 4.4.7 SeasonName . 80 4.4.8

32、 SVCControlMode . 80 4.4.9 SynchronousMachineOperatingMode . 80 4.4.10 SynchronousMachineType . 81 4.4.11 TapChangerKind 81 4.4.12 TransformerControlMode . 81 4.4.13 UnitSymbol 81 4.4.14 WindingConnection 82 4.5 Datatypes . 82 4.5.1 ActivePower 82 4.5.2 AngleDegrees 82 BS EN 61970-452:2015IEC 61970-

33、452:2015 IEC 2015 5 4.5.3 ApparentPower 82 4.5.4 Conductance . 83 4.5.5 CurrentFlow . 83 4.5.6 Length . 83 4.5.7 Money . 83 4.5.8 PerCent . 83 4.5.9 Reactance . 84 4.5.10 ReactivePower 84 4.5.11 Resistance 84 4.5.12 Seconds 84 4.5.13 Susceptance 84 4.5.14 Voltage 84 4.5.15 VoltagePerReactivePower .

34、85 5 Amplifications and conventions 85 5.1 Overview. 85 5.2 XML file validity 85 5.3 Normative string tables . 85 5.4 Roles and multiplicity 86 Annex A (informative) Model exchange use cases . 87 Annex B (informative) Modeling authorities 91 Annex C (informative) Common power system model (CPSM) min

35、imum data requirements . 93 Bibliography 99 Figure 1 Two winding transformer impedance 12 Figure 2 Three winding transformer impedance 13 Figure A.1 Security coordinators 87 Figure A.2 CIM model exchange 88 Figure A.3 Revised CIM model exchange . 89 Figure A.4 Hierarchical modeling . 90 Table 1 Vali

36、d measurementTypes 14 Table 2 Profiles defined in this document . 16 Table 3 Valid attribute values . 85 BS EN 61970-452:2015 6 IEC 61970-452:2015 IEC 2015 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ENERGY MANAGEMENT SYSTEM APPLICATION PROGRAM INTERFACE (EMS-API) Part 452: CIM model exchange specif

37、ication FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardizatio

38、n in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is ent

39、rusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the Inter

40、national Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since

41、each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of

42、 IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in

43、their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity asse

44、ssment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, empl

45、oyees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of th

46、e publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the

47、possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. The present part of International Standard IEC 61970 has been prepared by IEC technical committee 57: Power systems mana

48、gement and associated information exchange. This second edition cancels and replaces the first edition published in 2013. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) subclause 3.3, Transform

49、er modeling Updated description of transformer modelling to reflect changes in the modelling of transformers to work for both transmission and distribution systems; b) subclause 3.5.1, Use of measurement classes General Updated to reflect changes to the measurement model; BS EN 61970-452:2015IEC 61970-452:2015 IEC 2015 7 c) subclause 3.5.2, ICCP data exchange Updated to reflect changes to the use of identification in the model (IdentifiedObject, Name, and NameType); d) the followin