EN 61970-552-2016 en Energy management system application program interface (EMS-API) - Part 552 CIMXML Model exchange format.pdf

1、Energy management system application program interface(EMS-API)Part 552: CIMXML Model exchange formatBS EN 61970-552:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implementation of EN 61970-552:2016. It isidentic

2、al to IEC 61970-552:2016. It supersedes BS EN 61970-552:2014 whichis withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee PEL/57, Power systems management and associated information exchange.A list of organizations represented on this committee can be obtained onrequ

3、est to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 89913 3ICS 33.200Compliance with a British Stan

4、dard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61970-552:2016EUROPEAN STANDARD NORME EUROP

5、ENNE EUROPISCHE NORM EN 61970-552 December 2016 ICS 33.200 Supersedes EN 61970-552:2014 English Version Energy management system application program interface (EMS-API) - Part 552: CIMXML Model exchange format (IEC 61970-552:2016) Interface de programmation dapplication pour systme de gestion dnergi

6、e (EMS-API) - Partie 552: Format dchange de modle CIMXML (IEC 61970-552:2016) Schnittstelle fr Anwendungsprogramme fr Netzfhrungssysteme (EMS-API) - Teil 552: CIM-XML-Modell Austauschformat (IEC 61970-552:2016) This European Standard was approved by CENELEC on 2016-11-01. CENELEC members are bound t

7、o comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-C

8、ENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Cen

9、tre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Ita

10、ly, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr

11、Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61970-552:2016 E BS EN 61970-552:2016EN 61970-552:2016 2 European foreword The text of d

12、ocument 57/1752/FDIS, future edition 2 of IEC 61970-552, prepared by IEC/TC 57 “Power systems management and associated information exchange“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61970-552:2016. The following dates are fixed: latest date by which the document

13、has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-08-01 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-11-01 This document supersedes EN 61970-552:2014. Attention is drawn t

14、o the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the Europe

15、an Free Trade Association. Endorsement notice The text of the International Standard IEC 61970-552:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61968-11 N

16、OTE Harmonized as EN 61968-11. IEC 61970-1 NOTE Harmonized as EN 61970-1. BS EN 61970-552:2016EN 61970-552:2016 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively refer

17、enced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modif

18、ications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu Publication Year Title EN/HD Year IEC 60050 Series International Electrotechnical Vocabulary - - IEC/TS 6197

19、0-2 - Energy management system application program interface (EMS-API) - Part 2: Glossary CLC/TS 61970-2 - IEC 61970-501 2006 Energy management system application program interface (EMS-API) - Part 501: Common Information Model Resource Description Framework (CIM RDF) schema EN 61970-501 2006 W3C -

20、RDF/XML Syntax Specification - - W3C - XSL Transformations (XSLT) - - W3C - Document Object Model (DOM) - - BS EN 61970-552:2016 2 IEC 61970-552:2016 IEC 2016 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references. 6 3 Terms and definitions 7 4 CIMXML version 9 5 Model exchange 9 5.

21、1 General . 9 5.2 Rules for CIMXML documents and headers 9 5.3 Model and header data description 10 5.4 Work flow 13 6 Object identification . 14 6.1 URIs as identifiers . 14 6.2 About rdf:ID and rdf:about . 15 6.3 CIMXML element identification 16 6.4 Older ID formats 17 6.5 Object type . 17 6.5.1 G

22、eneral . 17 6.5.2 References to a more generic type than the actual 17 7 CIMXML format rules and conventions . 19 7.1 General . 19 7.2 Simplified RDF syntax . 19 7.2.1 General . 19 7.2.2 Notation . 20 7.2.3 Syntax definition (normative) 20 7.2.4 Syntax extension for difference model 26 7.3 CIMXML fo

23、rmat style guide 31 7.4 Representing new, deleted and changed objects as CIMXML elements 32 7.5 CIM RDF schema generation with CIM profile 32 7.6 CIM extensions . 33 7.7 RDF simplified syntax design rationale 33 Bibliography . 35 Figure 1 Model with header 10 Figure 2 Example work flow events 13 Fig

24、ure 3 Example work flow events with more dependencies . 14 Figure 4 CIM PSR Location data model . 17 Figure 5 CIMXML-based power system model exchange mechanism . 19 Figure 6 Relations between UML, profile and CIMXML tools . 33 Table 1 CIMXML version 9 Table 2 Header attributes . 11 BS EN 61970-552:

25、2016IEC 61970-552:2016 IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ENERGY MANAGEMENT SYSTEM APPLICATION PROGRAM INTERFACE (EMS-API) Part 552: CIMXML Model exchange format FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization compri

26、sing all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standa

27、rds, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this prepar

28、atory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organiza

29、tions. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of

30、recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation

31、by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regiona

32、l publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by

33、independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for

34、 any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Norm

35、ative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held respo

36、nsible for identifying any or all such patent rights. International Standard IEC 61970-552 has been prepared by IEC technical committee 57, Power systems management and associated information exchange. This second edition cancels and replaces the first edition published in 2013. This edition constit

37、utes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) New Clause 4 that defines the versioning of CIMXML format described in this document. b) Subclause 5.1, the statement on work flow support is removed. c) Subclause 5.

38、2, Statement about mandatory header added. Rules how to use the header added. The discussion on management of multiple CIMXML documents and archives is removed. BS EN 61970-552:2016 4 IEC 61970-552:2016 IEC 2016 d) Subclause 5.3, FullModelDocumentElement removed, minor version added to profile URI a

39、nd the meaning of the header is elaborated in Table 2. e) Subclause 6.2 the description of rdf:ID and rdf:about has been updated. f) Subclause 6.3 introduce the new urn:uuid form and discuss the backwards compatibility. g) New Subclause 6.4 added on support of older UUID formats. h) New Subclause 6.

40、5 discussing object types added. i) Subclause 7.2.3.3, Position of header described and duplicate rows removed. j) Document identification and references between documents updated in Table 2 and Subclauses 7.2.3.4 and 7.2.4.6. k) Subclause 7.2.3.7, A compound element can never be a root element. l)

41、Subclause 7.2.3.9, description of compound containment added. m) Subclauses 7.2.3.4 and 7.2.4.7.3, More clarification of cascading delete. The text of this standard is based on the following documents: FDIS Report on voting 57/1752/FDIS 57/1773/RVD Full information on the voting for the approval of

42、this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 61970 series, published under the general title Energy management system application program interface

43、(EMS-API), can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be

44、 reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document us

45、ing a colour printer. BS EN 61970-552:2016IEC 61970-552:2016 IEC 2016 5 INTRODUCTION This part of IEC 61970 is part of the series of standards that define an Application Program Interface (API) for an Energy Management System (EMS). IEC 61970-301 specifies a Common Information Model (CIM): a logical

46、 view of the physical aspects of an electric utility operations. The CIM is described using the Unified Modelling Language (UML), a language used to specify, visualize, and document systems in an object-oriented manner. UML is an analysis and design language; it is not a programming language. In ord

47、er for software programs to use the CIM, it must be transformed into a schema form that supports a programmable interface. IEC 61970-501 describes the translation of the CIM in UML form into a machine readable format as expressed in the Extensible Markup Language (XML) representation of that schema

48、using the Resource Description Framework (RDF) Schema specification language. This part of IEC 61970 specifies how the CIM RDF schema specified in IEC 61970-501 is used to exchange power system models using XML (referred to as CIMXML) defined in the 61970-45x series of profile standards, such as the

49、 CIM Transmission Network Model Exchange Profile described in IEC 61970-452. BS EN 61970-552:2016 6 IEC 61970-552:2016 IEC 2016 ENERGY MANAGEMENT SYSTEM APPLICATION PROGRAM INTERFACE (EMS-API) Part 552: CIMXML Model exchange format 1 Scope This part of IEC 61970 specifies the format and rules for exchanging modelling information based upon the CIM. It uses the CIM RDF Schema presented in IEC 61970-501 as the meta-model framework for constructing XML documents of power syste