EN 61987-11-2017 en Industrial-process measurement and control - Data structures and elements in -process equipment catalogues - Part 11 Lists of properties (LOPs) of measuring equ.pdf

1、Industrial-process measurement and control Data structures and elements in process equipment cataloguesPart 11: List of properties (LOPs) of measuring equipment for electronic data exchange Generic structuresBS EN 61987-11:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/20

2、13 15:06EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 61987-11April 2017ICS 25.040.40; 35.100.20 Supersedes EN 61987-11:2012 English VersionIndustrial-process measurement and control - Data structures and elements in -process equipment catalogues - Part 11: Listsof properties (LOPs) of measuring

3、 equipment for electronic dataexchange - Generic structures(IEC 61987-11:2016)Mesure et commande des processus industriels -Structures de donnes et lments dans les cataloguesdquipement de processus - Partie 11: Listes desproprits (LOP) dquipements de mesure pour lchange lectronique de donnes - Struc

4、tures gnriques(IEC 61987-11:2016)Industrielle Leittechnik - Datenstrukturen und -elemente in Katalogen der Prozessleittechnik - Teil 11: Merkmalleisten (ML) fr Messgerte fr den elektronischenDatenaustausch - Allgemeine Strukturen(IEC 61987-11:2016)This European Standard was approved by CENELEC on 20

5、17-01-19. CENELEC members are bound to comply with the CEN/CENELECInternal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be o

6、btained on application to the CEN-CENELEC Management Centre or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified

7、 to the CEN-CENELEC Management Centre has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece

8、, Hungary, Iceland, Ireland, Italy, Latvia,Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,Switzerland, Turkey and the United Kingdom.European Committee for Electrotechnical StandardizationComit Europen de Normalisation Elec

9、trotechniqueEuropisches Komitee fr Elektrotechnische NormungCEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.Ref. No. EN 61987-11:2017 ENational forewordThis British Standard i

10、s the UK implementation of EN 61987-11:2017. It is identical to IEC 61987-11:2016. It supersedes BS EN 61987-11:2012 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee AMT/7, Industrial communications: process measurement and control, including fieldbus.A

11、 list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standar

12、ds Limited 2017ISBN 978 0 580 90060 0ICS 25.040.40; 35.100.20Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2017.Amendments/corrigenda issued since pub

13、licationDate Text affectedBRITISH STANDARDBS EN 61987-11:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61987-11 April 2017 ICS 25.040.40; 35.100.20 Supersedes EN 61987-11:2012 English Version Industrial-process measurement and control - Data structures and elements in -process equipment c

14、atalogues - Part 11: Lists of properties (LOPs) of measuring equipment for electronic data exchange - Generic structures (IEC 61987-11:2016) Mesure et commande des processus industriels - Structures de donnes et lments dans les catalogues dquipement de processus - Partie 11: Listes des proprits (LOP

15、) dquipements de mesure pour lchange lectronique de donnes - Structures gnriques (IEC 61987-11:2016) Industrielle Leittechnik - Datenstrukturen und -elemente in Katalogen der Prozessleittechnik - Teil 11: Merkmalleisten (ML) fr Messgerte fr den elektronischen Datenaustausch - Allgemeine Strukturen (

16、IEC 61987-11:2016) This European Standard was approved by CENELEC on 2017-01-19. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists a

17、nd bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under

18、 the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Esto

19、nia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Co

20、mmittee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for C

21、ENELEC Members. Ref. No. EN 61987-11:2017 E BS EN 61987-11:2017EN 61987-11:2017 2 European foreword The text of document 65E/467/CDV, future edition 2 of IEC 61987-11, prepared by SC 65E “Devices and integration in enterprise systems” of IEC/TC 65 “Industrial process measurement, control and automat

22、ion“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61987-11:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-10-21 latest date by

23、 which the national standards conflicting with the document have to be withdrawn (dow) 2020-04-21 This document supersedes EN 61987-11:2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held resp

24、onsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61987-11:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standard

25、s indicated: IEC 60770-1:2010 NOTE Harmonized as EN 60770-1:2011 IEC 61360-1:2009 NOTE Harmonized as EN 61360-1:2010 IEC 61360-2 NOTE Harmonized as EN 61360-2 IEC 61987-12 NOTE Harmonized as EN 61987-12 IEC 81346-1:2009 NOTE Harmonized as EN 81346-1:2009 ISO 10303 (Series) NOTE Harmonized as ENV 103

26、03 (Series) BS EN 61987-11:2017EN 61987-11:2017 2 European foreword The text of document 65E/467/CDV, future edition 2 of IEC 61987-11, prepared by SC 65E “Devices and integration in enterprise systems” of IEC/TC 65 “Industrial process measurement, control and automation“ was submitted to the IEC-CE

27、NELEC parallel vote and approved by CENELEC as EN 61987-11:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-10-21 latest date by which the national standards co

28、nflicting with the document have to be withdrawn (dow) 2020-04-21 This document supersedes EN 61987-11:2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or a

29、ll such patent rights. Endorsement notice The text of the International Standard IEC 61987-11:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60770-1:2010 NO

30、TE Harmonized as EN 60770-1:2011 IEC 61360-1:2009 NOTE Harmonized as EN 61360-1:2010 IEC 61360-2 NOTE Harmonized as EN 61360-2 IEC 61987-12 NOTE Harmonized as EN 61987-12 IEC 81346-1:2009 NOTE Harmonized as EN 81346-1:2009 ISO 10303 (Series) NOTE Harmonized as ENV 10303 (Series) EN 61987-11:2017 3 A

31、nnex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited appl

32、ies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of t

33、he European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60947-5-6 - Low-voltage switchgear and controlgear - Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR) EN 6

34、0947-5-6 - IEC 61069-5 - Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability EN 61069-5 - IEC 61508-6 - Functional safety of electrical/electronic/programmable electronic safety-rel

35、ated systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 EN 61508-6 - IEC 61987-1 2006 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 1: Measuring equipment with analogue and digital output EN 61987-1 2007 I

36、EC 61987-10 2009 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 10: Lists of Properties (LOPs) for Industrial-Process Measurement and Control for Electronic Data Exchange - Fundamentals EN 61987-10 2009 - - + AC 2011 IEC 61987-92 - -

37、- IEC 62424 - Representation of process control engineering - Requests in P any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparat

38、ion. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensu

39、s of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are

40、made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications tran

41、sparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent

42、certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liabilit

43、y shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (includin

44、g legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of thi

45、s publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61987-11 has been prepared by subcommittee 65E: D

46、evices and integration in enterprise systems, of IEC technical committee 65: Industrial-process measurement, control and automation. This second edition cancels and replaces the first edition published in 2012. This edition constitutes a technical revision. This edition includes the following signif

47、icant technical changes with respect to the previous edition: a) The classification in Table A.1 has been amended to reflect the changes in the classification scheme of process measuring equipment in the CDD due to the development of IEC 61987-14, IEC 61987-15 and IEC 61987-16. b) Annex A has become

48、 “informative”. BS EN 61987-11:2017IEC 61987-11:2016 IEC 2016 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES Part 11: Lists of properties (LOPs) of measuring equipment for electronic data exchange

49、Generic structures FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, P