EN 62007-1-2015 en Semiconductor optoelectronic devices for fibre optic system applications - Part 1 Specification template for essential ratings and characteristics.pdf

1、BSI Standards PublicationSemiconductor optoelectronicdevices for fibre optic systemapplicationsPart 1: Specification template for essential ratings and characteristicsBS EN 62007-1:2015National forewordThis British Standard is the UK implementation of EN 62007-1:2015. It isidentical to IEC 62007-1:2

2、015. It supersedes BS EN 62007-1:2009 which iswithdrawn.The UK participation in its preparation was entrusted by TechnicalCommittee GEL/86, Fibre optics, to Subcommittee GEL/86/3, Fibre optic systems and active devices.A list of organizations represented on this committee can be obtained onrequest t

3、o its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 81906 3ICS 31.080.01; 31.260; 33.180.01Compliance wi

4、th a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2015.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62007-1:2015EUROPEAN STANDARD

5、 NORME EUROPENNE EUROPISCHE NORM EN 62007-1 June 2015 ICS 31.080.01; 31.260; 33.180.01 Supersedes EN 62007-1:2009 English Version Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential ratings and characteristics (IEC 62007-1:2015) Dis

6、positifs optolectroniques semiconducteurs pour application dans les systmes fibres optiques - Partie 1: Modle de spcification relatif aux valeurs et caractristiques essentielles (IEC 62007-1:2015) Optoelektronische Halbleiterbauelemente fr Anwendungen in Lichtwellenleitersystemen - Teil 1: Vorlage f

7、r Leistungsspezifikationen fr wesentliche Grenz- und Kennwerte (IEC 62007-1:2015) This European Standard was approved by CENELEC on 2015-05-04. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of

8、 a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, Ger

9、man). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgiu

10、m, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,

11、Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitatio

12、n in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62007-1:2015 E BS EN 62007-1:2015EN 62007-1:2015 2 Foreword The text of document 86C/1256/CDV, future edition 3 of IEC 62007-1, prepared by SC 86C “Fibre optic systems and active devices“ of IEC/TC 86 “Fibre optics“ w

13、as submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62007-1:2015. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-02-04 latest date by which

14、the national standards conflicting with the document have to be withdrawn (dow) 2018-05-04 This document supersedes EN 62007-1:2009. EN 62007-1:2015 includes the following significant technical changes with respect to EN 62007-1:2009: 1) The definitions of some symbols and terms are revised in order

15、 to harmonize them with those in other SR 86C documents; 2) A clause on APD-TIA has been added. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such paten

16、t rights. Endorsement notice The text of the International Standard IEC 62007-1:2015 was approved by CENELEC as a European Standard without any modification. BS EN 62007-1:2015EN 62007-1:2015 3 Annex ZA (normative) Normative references to international publications with their corresponding European

17、publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) app

18、lies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu Publication Year Title EN/HD

19、 Year IEC 60825 Series Safety of laser products EN 60825 Series IEC 60747-5-1 - Discrete semiconductor devices and integrated circuits - Part 5-1: Optoelectronic devices - General EN 60747-5-1 - BS EN 62007-1:2015 2 IEC 62007-1:2015 IEC 2015 CONTENTS FOREWORD . 5 1 Scope 7 2 Normative references. 7

20、3 Terms, definitions and abbreviations 7 3.1 Terms and definitions 7 3.2 Abbreviations 9 4 LEDs for fibre optic systems or subsystems 9 4.1 Type . 9 4.2 Semiconductor materials . 9 4.3 Details of outline and encapsulation 9 4.4 Limiting values (absolute maximum ratings) over the operating temperatur

21、e range, unless otherwise stated 10 4.5 Electrical and optical characteristics 10 4.6 Supplementary information 11 5 Laser module with pigtails 12 5.1 Type . 12 5.2 Semiconductor 12 5.2.1 Materials 12 5.2.2 Structure 12 5.3 Details of outline and encapsulation 12 5.4 Limiting values (absolute maximu

22、m ratings) over the operating temperature range, unless otherwise stated 13 5.4.1 General conditions . 13 5.4.2 Laser diode 13 5.4.3 Photodiode 13 5.4.4 Thermal sensor (where appropriate) . 13 5.4.5 Thermoelectric cooler (where appropriate) 14 5.5 Electric and optical characteristics . 14 5.6 Supple

23、mentary information 15 5.7 Hazards 16 6 PIN photodiodes for fibre optic systems or subsystems . 16 6.1 Type . 16 6.2 Semiconductor materials . 16 6.3 Details of outline and encapsulation 16 6.4 Limiting values (absolute maximum ratings) over the operating temperature range, unless otherwise stated 1

24、7 6.5 Electrical and optical characteristics 18 6.6 Supplementary information 18 7 Avalanche photodiodes (APDs) with or without pigtails . 19 7.1 Type . 19 7.2 Semiconductor 19 7.3 Details of outline and encapsulation 19 7.4 Limiting values (absolute maximum ratings) over the operating temperature r

25、ange, unless otherwise stated 19 7.5 Electrical and optical characteristics 19 7.6 Supplementary information 20 8 PIN-TIA modules for fibre optic systems or subsystems 21 BS EN 62007-1:2015IEC 62007-1:2015 IEC 2015 3 8.1 Type . 21 8.2 Semiconductor materials . 21 8.3 Structure . 21 8.4 Details of ou

26、tline and encapsulation 21 8.5 Limiting values (absolute maximum ratings) over the operating temperature range, unless otherwise stated 22 8.6 Operating conditions at Tamb= 25 C, unless otherwise stated . 22 8.7 Electrical and optical characteristics 23 8.8 Supplementary information 23 9 APD-TIA mod

27、ules for fibre optic systems or subsystems . 24 9.1 Type . 24 9.2 Semiconductor materials . 24 9.3 Structure . 24 9.4 Details of outline and encapsulation 24 9.5 Limiting values (absolute maximum ratings) over the operating temperature range, unless otherwise stated 24 9.6 Electrical and optical cha

28、racteristics 25 10 Laser diode modules for pumping an optical fibre amplifier . 26 10.1 Type . 26 10.2 Semiconductor materials . 26 10.3 Structure . 26 10.4 Details of outline and encapsulation 26 10.5 Limiting values (absolute maximum ratings) over the operating temperature range, unless otherwise

29、stated 27 10.6 Electrical and optical characteristics 27 10.7 Supplementary information 29 10.8 Hazards 29 11 Optical modulators for digital fibre optic applications 29 11.1 Type . 29 11.2 Materials . 29 11.3 Structure . 29 11.4 Details of outline and encapsulation 30 11.5 Limiting values (absolute

30、maximum ratings) . 30 11.6 Electrical and optical characteristics 31 11.7 Supplementary information 32 11.8 Hazards 32 Bibliography . 33 Table 1 Limiting values for LEDs 10 Table 2 Electrical and optical characteristics for LEDs 11 Table 3 Electric and optical characteristics for laser modules with

31、pigtails . 14 Table 4 Limiting values for PIN photodiodes . 17 Table 5 Electrical and optical characteristics for PIN photodiodes . 18 Table 6 Electrical and optical characteristics for avalanche photodiodes (APDs) with or without pigtails 20 Table 7 Limiting values for PIN-TIA modules 22 Table 8 Op

32、erating conditions for PIN-TIA modules 22 Table 9 Electrical and optical characteristics for PIN-TIA modules . 23 BS EN 62007-1:2015 4 IEC 62007-1:2015 IEC 2015 Table 10 Limiting values for APD-TIA modules . 25 Table 11 Electrical and optical characteristics for APD-TIA modules . 25 Table 12 Limitin

33、g values for laser diode modules for pumping an optical fibre amplifier . 27 Table 13 Electrical and optical characteristics for laser diode modules for pumping an optical fibre amplifier 28 Table 14 Limiting values for optical modulators for digital fibre optic applications 30 Table 15 Electrical a

34、nd optical characteristics for optical modulators for digital fibre optic applications 31 BS EN 62007-1:2015IEC 62007-1:2015 IEC 2015 5 COMMISSION LECTROTECHNIQUE INTERNATIONALE _ SEMICONDUCTOR OPTOELECTRONIC DEVICES FOR FIBRE OPTIC SYSTEM APPLICATIONS Part 1: Specification template for essential ra

35、tings and characteristics FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concern

36、ing standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their

37、preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates clos

38、ely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the releva

39、nt subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the te

40、chnical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum e

41、xtent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provi

42、de conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or i

43、ts directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses

44、 arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attentio

45、n is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62007-1 has been prepared by subcommittee 86C: Fibre optic systems and acti

46、ve devices, of IEC technical committee 86: Fibre optics. This third edition cancels and replaces the second edition published in 2008. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition. 1) The definit

47、ions of some symbols and terms are revised in order to harmonize them with those in other SC 86C documents. 2) A clause on APD-TIA has been added. BS EN 62007-1:2015 6 IEC 62007-1:2015 IEC 2015 The text of this standard is based on the following documents: CDV Report on voting 86C/1256/CDV 86C/1283/

48、RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 62007 series, published under the general title

49、Semiconductor optoelectronic devices for fibre optic system applications, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. BS EN 62007-1:2015IEC 62007-1:2015 IEC 201