EN 62028-2004 en General methods of measurement for digital television receivers《数字电视接收机测量的通用方法 IEC 62028 2002》.pdf

1、BRITISH STANDARD BS EN 62028:2004 General methods of measurement for digital television receivers The European Standard EN 62028:2004 has the status of a British Standard ICS 33.160.20 BS EN 62028:2004 This British Standard was published under the authority of the Standards Policy and Strategy Commi

2、ttee on 25 January 2005 BSI 25 January 2005 ISBN 0 580 45325 1 National foreword This British Standard is the official English language version of EN 62028:2004. It is identical with IEC 62028:2002. The UK participation in its preparation was entrusted to Technical Committee EPL/100, Audio, video an

3、d multimedia systems, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI

4、 Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for i

5、ts correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK intere

6、sts informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 49 and a back cover. The BSI copyright notice displayed in this document indicates when th

7、e document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 62028 NORME EUROPENNE EUROPISCHE NORM January 2004 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektro

8、technische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62028:2004 E ICS 33.160.20 English version General methods of measurement for digital television re

9、ceivers (IEC 62028:2002) Mthodes de mesures gnrales pour les rcepteurs de tlvision numriques (CEI 62028:2002) Allgemeine Messverfahren fr digitale Fernsehempfnger (IEC 62028:2002) This European Standard was approved by CENELEC on 2003-12-01. CENELEC members are bound to comply with the CEN/CENELEC I

10、nternal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELE

11、C member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. C

12、ENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switz

13、erland and United Kingdom. EN 62022:8400 - - 2 Foreword The text of the International Standard IEC 62028:2002, prepared by IEC TC 100, Audio, video and multimedia systems and equipment, was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 62028 on 2003-12-01 without any

14、 modification. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2004-12-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2006-1

15、2-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62028:2002 was approved by CENELEC as a European Standard without any modification. _ Page2 EN62028:2004 2 62028 IE2:C200(E) CONTENTS 1 Scope.7 2 Normative references.7 3 Terms, definitions and a

16、bbreviations 8 3.1 Terms and definitions 8 3.2 Abbreviations8 4 Conceptual block diagram of digital television receivers .11 4.1 General.11 4.1.1 Types of receivers.11 4.1.2 Peripheral connectors11 4.2 Basic common block diagram 11 4.2.1 General.11 4.2.2 Satellite broadcasting system 11 4.2.3 Terres

17、trial broadcasting system.11 4.2.4 CATV system.12 5 General notes on measurements 12 5.1 General conditions12 5.2 Test signals.12 5.2.1 Video test signals12 5.2.2 Audio test signals12 5.2.3 Data test signals12 5.3 RF (radio frequency) television signal13 5.3.1 General.13 5.3.2 Reference modulation13

18、 5.3.3 Signal level13 5.4 Measuring systems and test instruments .13 5.4.1 Measuring system.13 5.4.2 Base band test signal generators.13 5.4.3 Service data generator 13 5.4.4 Encoders.13 5.4.5 Modulator 14 5.4.6 BER analyzer14 5.5 Standard measuring conditions .14 5.5.1 Standard input signal levels.

19、14 5.5.2 Standard output signal levels.14 5.5.3 Standard receiver settings.14 5.5.4 General conditions14 5.6 Standard viewing conditions14 6 Assessment of received picture and sound quality16 6.1 Subjective tests of basic received quality 15 6.1.1 Objectives.15 6.1.2 Methodology15 7 Methods of measu

20、rement of RF signals17 7.1 General.17 7.2 Method of measurement of RF signal level20 Page3 EN62028:200462028 IEC:0202(E) 3 7.2.1 Introduction.20 7.2.2 Equipment required.20 7.2.3 Connection of the equipment .20 7.2.4 Measurement procedure20 7.2.5 Presentation of the results.21 7.3 Method of measurem

21、ent of carrier to noise ratio (C/N) 21 7.3.1 Introduction.21 7.3.2 Equipment required.21 7.3.3 Connection of the equipment .22 7.3.4 Measurement procedure21 7.3.5 Presentation of the results.22 7.4 Method of measurement of Bit Error Rate (BER) .22 7.4.1 Introduction.22 7.4.2 Equipment required.22 7.

22、4.3 Connection of the equipment .23 7.4.4 Measurement procedure23 7.4.5 Presentation of the results.23 7.5 Method of measurement of BER versus E b /N o 24 7.5.1 Introduction.24 7.5.2 Equipment required.24 7.5.3 Connection of the equipment .24 7.5.4 Measurement procedure24 7.5.5 Presentation of the r

23、esults.25 7.6 Method of measurement of noise margin .26 7.6.1 Introduction.26 7.6.2 Equipment required.26 7.6.3 Connection of the equipment .26 7.6.4 Measurement procedure27 7.6.5 Presentation of the results.27 7.7 Method of measurement of Modulation Error Ratio (MER) .27 7.7.1 Introduction.27 7.7.2

24、 Equipment required.28 7.7.3 Connection of the equipment .28 7.7.4 Measurement procedure28 7.7.5 Presentation of the results.29 7.8 Method of measurement of phase jitter29 7.8.1 Introduction.29 7.8.2 Equipment required.29 7.8.3 Connection of the equipment .30 7.8.4 Measurement procedure30 7.8.5 Pres

25、entation of the results.31 7.9 Method of measurement of phase noise of a RF carrier.31 7.9.1 Introduction.31 7.9.2 Equipment required.32 7.9.3 Connection of the equipment .32 7.9.4 Measurement procedure32 7.9.5 Presentation of the results.33 8 Measurements of the MPEG-2 transport stream .33 8.1 Intr

26、oduction.33 Page4 EN62028:2004 4 62028 IE2:C200(E) 8.2 Method of measurement34 8.2.1 Introduction.34 8.2.2 Equipment required.34 8.2.3 Connection of the equipment .34 8.2.4 Measurement procedure34 8.2.5 Presentation of the results.37 Annex A (normative) Digital signal level and bandwidth .40 A.1 RF/

27、IF power (“carrier“) .40 A.2 Bandwidth of a digital signal.40 A.3 Examples .42 Annex B (normative) Correction factor for spectrum analyser.44 Annex C (normative) Correction factors for noise.45 C.1 Signal level measurement.45 C.2 Noise level measurement .45 Annex ZA (normative) Normative references

28、to international publications with their corresponding European publications .47 Bibliography49 Figure 1 Conceptual configuration of a digital broadcasting system12 Figure 2 Measuring set-up .15 Figure 3 Layout of a basic received quality assessment trial 16 Figure 4 Rating scales used in the basic

29、received quality test17 Figure 5 Reference RF signal source I/Q signal source and RF modulator 18 Figure 6 Reference receiver.19 Figure 7 Test set-up for BER measurement .23 Figure 8 Test set-up for BER measurement versus E b /N o 25 Figure 9 Example of BER measurement versus E b /N o 26 Figure 10 T

30、est set-up for noise margin measurement.27 Figure 11 Test set-up for MER measurement .28 Figure 12 Example of constellation diagram for a 64QAM modulation format where the i thpoint has been enlarged to show the co-ordinates of the symbol error vector29 Figure 13 Test set-up for phase jitter measure

31、ment .30 Figure 14 Example of constellation diagram for a 64QAM modulation format where are shown the “corner decision boundary boxes“ for the phase jitter.30 Figure 15 Test set-up for phase noise measurement32 Figure 16 Possible mask for CPE measurements the points A, B and C to be defined .33 Figu

32、re 17 Measurement set-up for the evaluation of the MPEG-2 transport stream parameters for a communication link using a coaxial cable and synchronous serial transmission (SSI type).37 Figure 18 Measurement set-up for the evaluation of the MPEG-2 transport stream parameters for a communication link us

33、ing a fibre-optic cable and synchronous serial transmission (SSI type).37 Page5 EN62028:200462028 IEC:0202(E) 5 Figure 19 Measurement set-up for the evaluation of the MPEG-2 transport stream parameters for a communication link using a coaxial cable and asynchronous serial transmission (ASI type).38

34、Figure 20 Measurement set-up for the evaluation of the MPEG-2 transport stream parameters for a communication link using a fibre-optic cable and asynchronous serial transmission (ASI type).38 Figure 21 Measurement set-up for the evaluation of the MPEG-2 transport stream parameters for a communicatio

35、n link that feeds a CATV system using a satellite transponder and a down link in the 11/12 GHz band .39 Figure 22 Measurement set-up for the evaluation of the MPEG-2 transport stream parameters for a communication link that feeds a SMATV system using a satellite transponder and a down link in the 11

36、/12 GHz band .39 Figure A.1 VSB channel occupancy .41 Figure C.1 Noise correction factor CF (dB) versus measured level difference D (dB) .46 Table 1 Frequency offsets for 2k and 8k OFDM systems33 Table 2 First priority necessary for de-codability (basic monitoring) 35 Table 3 Second priority recomme

37、nded for continuous or periodic monitoring.35 Table 4 Third priority application dependant monitoring 36 Table A.1 Examples of bandwidth for digital modulation techniques.43 Table C.1 Noise correction factor.45 Page6 EN62028:2004 6 62028 IE2:C200(E) GENERAL METHODS OF MEASUREMENT FOR DIGITAL TELEVIS

38、ION RECEIVERS 1 Scope IEC 62028 deals with the standard conditions and methods of measurement on digital television receivers which receive digital television broadcast transmissions. IEC 62028 deals with the determination of performance and allows the comparison of equipment by listing the characte

39、ristics which are useful for specifications and by laying down uniform measuring methods of these characteristics. Performance requirements are not specified, since they are specified by other international, regional or domestic standards for the systems. It does not include the measurements specifi

40、c to the transmission system, such as; measurements on receivers for satellite transmission systems, measurements on receivers for terrestrial transmission systems, measurements on receivers for cable transmission systems, measurements specific to sound channels, and measurements specific to data ch

41、annels. IEC 62028 does not include methods of measurement on outdoor units and antennas for satellite reception, for which reference is required to other appropriate IEC standards. IEC 62028 does not deal with general safety matters, for which reference is required to IEC 60065, or other appropriate

42、 IEC safety standards, nor with radiation and immunity, which will be dealt with by CISPR. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest editio

43、n of the referenced document (including any amendments) applies. IEC 60107-1:1997, Methods of measurement on receivers for television broadcast transmissions Part 1: General considerations Measurements at radio and video frequencies ISO/IEC 13818-1:2000, Information technology Generic coding of movi

44、ng pictures and associated audio: Systems ISO/IEC 13818-4:1998, Information technology Generic coding of moving pictures and associated audio information Part 4: Conformance testing ISO/IEC 13818-9:1996, Information technology Generic coding of moving pictures and associated audio information Part 9

45、: Extension for real time interface for systems decoders ITU-R BT.500-10:2000, Methodology for the subjective assessment of quality of television pictures Page7 EN62028:200462028 IEC:0202(E) 7 EN 300 421 Digital video broadcasting (DVB) Framing structure, channel coding and modulation for 11/12 GHz

46、satellite services EN 300 429 Digital video broadcasting (DVB) Framing structure, channel coding and modulation for cable systems EN 300 744 Digital video broadcasting (DVB) Framing structure, channel coding and modulation for digital terrestrial television” ETR 211:1997, Digital video broadcasting

47、(DVB) Guidelines on implementation and usage of Service Information (SI) ETS 300 468:2000, Digital video broadcasting (DVB) Specification for Service Information (SI) in DVB systems 3 Terms, definitions and abbreviations 3.1 Terms and definitions For the purposes of this publication, the following t

48、erms and definitions apply: 3.1.1 MPEG-2 refers to the ISO/IEC 13818 series. System coding is defined in part 1, video coding is defined in part 2, audio coding is defined in part 3 3.1.2 multiplex stream of all the digital data carrying one or more services within a single physical channel 3.1.3 se

49、rvice information (SI) digital data describing the delivery system, content and scheduling/timing of broadcast data streams etc. It includes MPEG-2 program specific information (PSI) together with independently defined extensions. 3.1.4 transport stream (TS) a data structure defined in ISO/IEC 13818-1 3.2 Abbreviations AGC Automa