1、Electricity metering data exchange - The DLMS/COSEM suitePart 6-2: COSEM interface classesBS EN 62056-6-2:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implementation of EN 62056-6-2:2016. It isidentical to IEC 6
2、2056-6-2:2016. It supersedes BS EN 62056-6-2:2013 whichis withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee PEL/13, Electricity Meters.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purpor
3、t to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 86671 5ICS 17.220.01; 35.110; 91.140.50Compliance with a British Standard cannot confer immunity fro
4、mlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62056-6-2:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62056-6
5、-2 December 2016 ICS 17.220; 35.110; 91.140.50 Supersedes EN 62056-6-2:2013 English Version Electricity metering data exchange - The DLMS/COSEM suite - Part 6-2: COSEM interface classes (IEC 62056-6-2:2016) change des donnes de comptage de llectricit - La suite DLMS/COSEM - Partie 6-2: Classes dinte
6、rfaces COSEM (IEC 62056-6-2:2016) Datenkommunikation der elektrischen Energiemessung - DLMS/COSEM - Teil 6-2: COSEM Interface-Klassen (IEC 62056-6-2:2016) This European Standard was approved by CENELEC on 2016-03-29. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
7、 stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This
8、European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELE
9、C members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherland
10、s, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre:
11、 Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62056-6-2:2016 E BS EN 62056-6-2:2016EN 62056-6-2:2016 2 European foreword The text of document 13/1651A/FDIS, future edition 2 of IEC 62056-6-2
12、, prepared by IEC/TC 13 “Electrical energy measurement and control“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62056-6-2:2016. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical nat
13、ional standard or by endorsement (dop) 2017-06-09 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-12-09 This document supersedes EN 62056-6-2:2013. Attention is drawn to the possibility that some of the elements of this document may be the su
14、bject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association. Endorsement notice The text of the Internationa
15、l Standard IEC 62056-6-2:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 62056-4-7:2015 NOTE Harmonized as EN 62056-4-7:2015 (not modified). IEC 62056-7-6:20
16、13 NOTE Harmonized as EN 62056-7-6:2013 (not modified). IEC 62056-8-3:2013 NOTE Harmonized as EN 62056-8-3:2013 (not modified). IEC 62056-9-7:2013 NOTE Harmonized as EN 62056-9-7:2013 (not modified). BS EN 62056-6-2:2016EN 62056-6-2:2016 3 Annex ZA (normative) Normative references to international p
17、ublications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the refe
18、renced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available her
19、e: www.cenelec.eu Publication Year Title EN/HD Year - - Communication systems for meters and remote reading of meters - Part 2: Physical and link layer EN 13757-2 2004 - - Communication systems for meters and remote reading of meters - Part 3: Dedicated application layer EN 13757-3 2004 1)- - Commun
20、ication systems for meters and remote reading of meters - Part 3: Dedicated application layer EN 13757-3 2013 - - Communication systems for meters - Part 5: Wireless M-Bus relaying EN 13757-5 2015 IEC 61334-4-32 1996 Distribution automation using distribution line carrier systems - Part 4: Data comm
21、unication protocols - Section 32: Data link layer - Logical link control (LLC) EN 61334-4-32 1996 IEC 61334-4-41 1996 Distribution automation using distribution line carrier systems - Part 4: Data communication protocols - Section 41: Application protocols - Distribution line message specification E
22、N 61334-4-41 1996 IEC 61334-4-511 2000 Distribution automation using distribution line carrier systems - Part 4-511: Data communication protocols - Systems management - CIASE protocol EN 61334-4-511 2000 IEC 61334-4-512 2001 Distribution automation using distribution line carrier systems - Part 4-51
23、2: Data communication protocols - System management using profile 61334-5-1 - Management Information Base (MIB) EN 61334-4-512 2002 IEC 61334-5-1 2001 Distribution automation using distribution line carrier systems - Part 5-1: Lower layer profiles - The spread frequency shift keying (S-FSK) profile
24、EN 61334-5-1 2001 1)Superseded by EN 13757-3:2013. BS EN 62056-6-2:2016EN 62056-6-2:2016 4 Publication Year Title EN/HD Year IEC 61334-6 2000 Distribution automation using distribution line carrier systems - Part 6: A-XDR encoding rule EN 61334-6 2000 IEC 62056-21 2002 Electricity metering - Data ex
25、change for meter reading, tariff and load control - Part 21: Direct local data exchange EN 62056-21 2002 IEC 62056-31 1999 Electricity metering - Data exchange for meter reading, tariff and load control - Part 31: Use of local area networks on twisted pair with carrier signalling EN 62056-31 2000 2)
26、IEC 62056-3-1 2013 Electricity metering data exchange - The DLMS/COSEM suite - Part 3-1: Use of local area networks on twisted pair with carrier signalling EN 62056-3-1 2014 IEC 62056-46 + A1 2002 2006 Electricity metering - Data exchange for meter reading, tariff and load control - Part 46: Data li
27、nk layer using HDLC protocol EN 62056-46 + A1 2002 2007 IEC 62056-5-3 2016 Electricity metering data exchange - The DLMS/COSEM suite - Part 5-3: DLMS/COSEM application layer EN 62056-5-3 2016 IEC 62056-6-1 2015 Electricity metering data exchange - The DLMS/COSEM suite - Part 6-1: Object Identificati
28、on System (OBIS) EN 62056-6-1 2016 ISO/IEC 8802-2 1998 Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part-2: Logical link control - - ISO/IEC/IEEE 60559 2011 Information technology - Microprocesso
29、r Systems - Floating-Point arithmetic - - IEEE 802.15.4 2006 IEEE Standard for Information technology- Telecommunications and information exchange between systems- Local and metropolitan area networks- Specific requirements Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Spe
30、cifications for Low-Rate Wireless Personal Area Networks (WPANs) - - ITU-T G.9901 2014 SERIES G: TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS - Access Networks - In premises networks - Narrow-band orthogonal frequency division multiplexing power line communication transceivers - Powe
31、r spectral density specification - - 2)Superseded by EN 62056-3-1:2014 (IEC 62056-3-1:2013). BS EN 62056-6-2:2016EN 62056-6-2:2016 5 Publication Year Title EN/HD Year ITU-T G.9903:2012/A1 2013 SERIES G: TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS - Access networks - In premises netw
32、orks Narrow-band orthogonal frequency division multiplexing power line communication transceivers for G3-PLC networks - - ITU-T G.9903 2014 SERIES G: TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS - Access networks - In premises networks - Narrow-band orthogonal frequency division mult
33、iplexing power line communication transceivers for G3-PLC networks - - ITU-T G.9904 2012 SERIES G: TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS - Access networks - In premises networks - Narrow-band orthogonal frequency division multiplexing power line communication transceivers for
34、PRIME networks - - ETSI GSM 05.08 - Digital cellular telecommunications system (Phase 2+); Radio subsystem link control - - ANSI C12.19/ IEEE 1377 1997 1997 Utility Industry End Device Data Tables - - IETF STD 51 1994 The Point-to-Point Protocol (PPP) - - IETF RFC 791 1981 INTERNET PROTOCOL DARPA IN
35、TERNET PROGRAM PROTOCOL SPECIFICATION - - IETF RFC 1332 1992 The PPP Internet Protocol Control Protocol (IPCP) - - IETF RFC 1570 1994 PPP LCP Extensions - - IETF RFC 1661 1994 Point-to-Point Protocol (PPP) - - IETF RFC 1662 1994 PPP in HDLC-like Framing - - RFC 1994 1996 PPP Challenge Handshake Auth
36、entication Protocol (CHAP) - - RFC 2433 1998 PPP CHAP Extension - - IETF RFC 2474 1998 Definition of the Differentiated Services Field (DS Field) in the IPv4 and IPv6 Headers - - IETF RFC 2507 1999 IP Header Compression - - RFC 2759 2000 Microsoft PPP CHAP Extensions - - IETF RFC 3241 2002 Robust He
37、ader Compression (ROHC) over PPP - - RFC 3513 2003 Internet Protocol Version 6 (IPv6) Addressing Architecture - - RFC 3544 2003 IP Header Compression over PPP - - IETF RFC 4861 2007 Neighbor Discovery for IP version 6 (IPv6) - - Point-to-Point (PPP) Protocol Field Assignments. Online database. Avail
38、able from: http:/www.iana.org/assignments/ppp-numbers/ppp-numbers.xhtml BS EN 62056-6-2:2016EN 62056-6-2:2016 6 BS EN 62056-6-2:2016 2 IEC 62056-6-2:2016 IEC 2016 CONTENTS FOREWORD . 9 INTRODUCTION . 12 1 Scope 14 2 Normative references. 14 3 Terms, definitions and abbreviations 16 3.1 Terms and def
39、initions related to the Image transfer process (see 5.3.6) . 16 3.2 Terms and definitions related to the S-FSK PLC setup classes (see 5.8) 17 3.3 Terms and definitions related to the PRIME NB OFDM PLC setup ICs (see 5.10) . 18 3.4 Terms and definitions related to ZigBee (see 5.12) 20 3.5 Abbreviatio
40、ns 22 4 Basic principles . 26 4.1 General . 26 4.2 Referencing methods 27 4.3 Reserved base_names for special COSEM objects 27 4.4 Class description notation . 27 4.5 Common data types 30 4.6 Data formats . 31 4.6.1 Date and time formats 31 4.6.2 Floating point number formats 33 4.7 The COSEM server
41、 model . 35 4.8 The COSEM logical device 36 4.8.1 General . 36 4.8.2 COSEM logical device name (LDN) 36 4.8.3 The “association view” of the logical device 36 4.8.4 Mandatory contents of a COSEM logical device 37 4.8.5 Management logical device 37 4.9 Information security . 37 5 The COSEM interface c
42、lasses 38 5.1 Overview. 38 5.2 Interface classes for parameters and measurement data 42 5.2.1 Data (class_id = 1, version = 0) 42 5.2.2 Register (class_id = 3, version = 0) 42 5.2.3 Extended register (class_id = 4, version = 0) 46 5.2.4 Demand register (class_id = 5, version = 0) 47 5.2.5 Register a
43、ctivation (class_id = 6, version = 0) . 50 5.2.6 Profile generic (class_id = 7, version = 1) . 52 5.2.7 Utility tables (class_id = 26, version = 0). 57 5.2.8 Register table (class_id = 61, version = 0) 58 5.2.9 Status mapping (class_id = 63, version = 0) 60 5.3 Interface classes for access control a
44、nd management 61 5.3.1 Overview . 61 5.3.2 Client user identification . 61 5.3.3 Association SN (class_id = 12, version = 3) 62 5.3.4 Association LN (class_id = 15, version = 2) 66 5.3.5 SAP assignment (class_id = 17, version = 0) 72 BS EN 62056-6-2:2016IEC 62056-6-2:2016 IEC 2016 3 5.3.6 Image tran
45、sfer . 72 5.3.7 Security setup (class_id = 64, version = 0) 79 5.3.8 Push interface classes and objects . 81 5.4 Interface classes for time- and event bound control 87 5.4.1 Clock (class_id = 8, version = 0) . 87 5.4.2 Script table (class_id = 9, version = 0) 90 5.4.3 Schedule (class_id = 10, versio
46、n = 0) . 91 5.4.4 Special days table (class_id = 11, version = 0) . 94 5.4.5 Activity calendar (class_id = 20, version = 0) 95 5.4.6 Register monitor (class_id = 21, version = 0) 98 5.4.7 Single action schedule (class_id = 22, version = 0) . 100 5.4.8 Disconnect control (class_id = 70, version = 0)
47、. 101 5.4.9 Limiter (class_id = 71, version = 0) . 103 5.4.10 Parameter monitor (class_id = 65, version = 0) . 106 5.4.11 Sensor manager interface class 107 5.5 Interface classes for setting up data exchange via local ports and modems 111 5.5.1 IEC local port setup (class_id = 19, version = 1) . 111
48、 5.5.2 IEC HDLC setup (class_id = 23, version = 1) 112 5.5.3 IEC twisted pair (1) setup (class_id = 24, version = 1) . 114 5.5.4 Modem configuration (class_id = 27, version = 1) . 117 5.5.5 Auto answer (class_id = 28, version = 2) 118 5.5.6 Auto connect (class_id = 29, version = 2) . 121 5.5.7 GPRS
49、modem setup (class_id = 45, version = 0) 123 5.5.8 GSM diagnostic (class_id = 47, version = 0) . 124 5.6 Interface classes for setting up data exchange via M-Bus . 126 5.6.1 M-Bus slave port setup (class_id = 25, version = 0) 126 5.6.2 M-Bus client (class_id = 72, version = 1) 127 5.6.3 Wireless Mode Q channel (class_id = 73, version = 1) 132 5.6.4 M-Bus master port setup (class_id = 74, version = 0) 133 5.7 Interface classes for setting up data exchange over the Internet . 133 5.7.1 TCP-UDP setup (class_id = 41, version = 0) . 133 5.7.2 IPv4
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1