EN 62056-7-5-2016 en Electricity metering data exchange - The DLMS COSEM suite - Part 7-5 Local data transmission profiles for Local Networks (LN).pdf

1、Electricity metering data exchange The DLMS/COSEM suitePart 7-5: Local data transmission profiles for Local Networks (LN)BS EN 62056-7-5:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implementation of EN 62056-7-

2、5:2016. It isidentical to IEC 62056-7-5:2016.The UK participation in its preparation was entrusted to TechnicalCommittee PEL/13, Electricity Meters.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the ne

3、cessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 86965 5ICS 17.220.20; 35.100.01; 91.140.50Compliance with a British Standard cannot confer immunity fromlegal obligations.T

4、his British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 December 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62056-7-5:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62056-7-5 December 2016 IC

5、S 17.220.20; 35.100.01; 91.140.50 English Version Electricity metering data exchange - The DLMS/COSEM suite - Part 7-5: Local data transmission profiles for Local Networks (LN) (IEC 62056-7-5:2016) change des donnes de comptage de llectricit - la suite DLMS/COSEM - partie 7-5: Profils de transmissio

6、n de donnes locales pour rseaux locaux (LN) (IEC 62056-7-5:2016) Datenkommunikation der elektrischen Energiemessung - DLMS/COSEM - Teil 7-5: Kommunikationsprofile zur lokalen Datenbertragung fr lokale Netze (IEC 62056-7-5:2016) This European Standard was approved by CENELEC on 2016-06-16. CENELEC me

7、mbers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applica

8、tion to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENEL

9、EC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Icel

10、and, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europi

11、sches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62056-7-5:2016 E BS EN 62056-7-5:2016EN 62056-7-5:2016 2 European forew

12、ord The text of document 13/1605/CDV, future edition 1 of IEC 62056-7-5, prepared by IEC/TC 13 “Electrical energy measurement, tariff- and load control“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62056-7-5:2016. The following dates are fixed: latest date by which th

13、e document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-06-09 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-12-09 Attention is drawn to the possibility that some of th

14、e elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62056-7-5:2016 was approved by CENELEC as a European Standard without any mod

15、ification. BS EN 62056-7-5:2016EN 62056-7-5:2015 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its applicatio

16、n. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE

17、2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60050-300 - International Electrotechnical Vocabulary - Electrical and electronic measurements and measuring instruments - Part 311:

18、 General terms relating to measurements - Part 312: General terms relating to electrical measurements - Part 313: Types of electrical measuring instruments - Part 314: Specific terms according to the type of instrument - - IEC 60950-1 (mod) 2005 Information technology equipment - Safety - Part 1: Ge

19、neral requirements EN 60950-1 2006 - - + A11 2009 + A1 (mod) 2009 + A1 2010 - - + A12 2011 - - + AC 2011 + A2 (mod) 2013 + A2 2013 IEC 62052-31 - Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests EN 62052-31 - IEC 6

20、2056-1-0 - Electricity metering data exchange - The DLMS/COSEM suite - Part 1-0: Smart metering standardisation framework EN 62056-1-0 - IEC 62056-3-1 2013 Electricity metering data exchange - The DLMS/COSEM suite - Part 3-1: Use of local area networks on twisted pair with carrier signalling EN 6205

21、6-3-1 2014 IEC 62056-4-7 2015 Electricity metering data exchange - The DLMS/COSEM suite - Part 4-7: DLMS/COSEM transport layer for IP networks EN 62056-4-7 2015 IEC 62056-5-3 2016 EN 62056-5-3 2016 IEC 62056-6-1 2015 Electricity metering data exchange - The DLMS/COSEM suite - Part 6-1: Object Identi

22、fication System (OBIS) EN 62056-6-1 2016 IEC 62056-6-2 2016 Electricity metering data exchange - The DLMS/COSEM suite - Part 6-2: COSEM interface classes EN 62056-6-2 2016 IEC 62056-9-7 - Electricity metering data exchange - The DLMS/COSEM suite - Part 9-7: Communication profile for TCP-UDP/IP netwo

23、rks EN 62056-9-7 - IEC 62056-21 2002 Electricity metering - Data exchange for meter reading, tariff and load control - Part 21: Direct local data exchange EN 62056-21 2002 BS EN 62056-7-5:2016EN 62056-7-5:2016 4 IEC 62056-46 2002 Electricity metering - Data exchange for meter reading, tariff and loa

24、d control - Part 46: Data link layer using HDLC protocol EN 62056-46 2002 + A1 2006 + A1 2007 IEC/TR 62051 - Electricity metering - Glossary of terms - - IEC/TR 62051-1 - Electricity metering - Data exchange for meter reading, tariff and load control - Glossary of terms - Part 1: Terms related to da

25、ta exchange with metering equipment using DLMS/COSEM - - ISO/IEC 13239 2002 Information technology - Telecommunications and information exchange between systems - High-level data link control (HDLC) procedures - - - Communication systems for and remote reading of meters - Part 2: Physical and link l

26、ayer EN 13757-2 - BS EN 62056-7-5:2016 2 IEC 62056-7-5:2016 IEC 2016 CONTENTS FOREWORD. 5 INTRODUCTION . 7 1 Scope 8 2 Normative references 10 3 Terms, definitions and abbreviations 11 3.1 Terms and definitions 11 3.2 Abbreviations 11 4 Targeted communication environments 11 5 Use of the communicati

27、on layers for these profiles . 12 5.1 Information related to the use of the standards specifying the lower layers . 12 5.2 Structure of the profile . 12 5.3 Use of the lower layers 13 5.3.1 Overview . 13 5.3.2 Physical layer 14 5.3.3 MAC layer 14 5.3.4 Data link layer 14 5.4 Service mapping and adap

28、tation layers 14 5.4.1 For the default HDLC based data link layer . 14 5.4.2 For other lower layers 15 5.5 Registration and connection management 15 6 Identification and addressing scheme . 15 6.1 General identification and addressing scheme . 15 6.2 Addressing for the default HDLC based data link l

29、ayer . 15 6.3 Addressing for other data link layers 15 7 Specific considerations for the application layer services 15 7.1 Overview 15 7.2 Application Association establishment and release: ACSE services 15 7.3 xDLMS services 15 7.4 Security mechanisms 16 7.5 Transferring long application messages .

30、 16 7.6 Media access, bandwidth and timing considerations . 16 8 Communication layer configuration and management . 17 9 The COSEM application process (AP) 17 9.1 Model and services . 17 9.2 COSEM interface classes (IEC 62056-6-2) to configure the LDTI . 18 9.3 Security environment (not valid for le

31、gacy mode) . 19 9.4 Restrictions for interfaces supporting “Legacy operating modes” 20 10 Additional considerations for the use of this profile Safety . 21 Annex A (normative) Media specific profile: Optical interface 22 A.1 IEC 62056-21 port . 22 A.2 IEC 62056-21 port operating in legacy mode 23 An

32、nex B (normative) Media specific Profile: TP with carrier signalling Interface . 25 B.1 IEC 62056-3-1 port 25 B.2 IEC 62056-3-1 port operating in legacy mode 26 Annex C (normative) Media specific profile: EIA-485, TIA-232-F interface . 29 BS EN 62056-7-5:2016IEC 62056-7-5:2016 IEC 2016 3 C.1 Electri

33、cal port RS485/232 29 Annex D (normative) Media specific profile: M-Bus EN 13757-2 31 D.1 M-Bus with the HDLC based data link layer . 31 Annex E (normative) IP profile . 33 E.1 IP profile . 33 Annex F (informative) LDTI configuration examples 35 F.1 Example 1: only one value (active energy A+) pushe

34、d 35 Annex G (informative) LDTI encoding examples . 37 G.1 xDLMS APDUs used (without protection and without general-block-transfer) . 37 G.2 Example 1: Only one value is pushed 37 G.3 Example 2: The OBIS code and one value is pushed 38 Index 40 Figure 1 LDTI DLMS/COSEM client as part of a consumer d

35、evice . 9 Figure 2 LDTI DLMS/COSEM client as part of a local adaptor . 9 Figure 3 Entities and interfaces of a smart metering system 12 Figure 4 IEC 62056-7-5 LDTI interface in the context of the smart metering architecture 12 Figure 5 Local data transmission reference model . 13 Figure 6 LDTI the i

36、nterface to a pre-established DLMS/COSEM LDTI client 18 Figure 7 Interface classes modelling the push operation . 19 Figure 8 Example of a security environment for an LDTI using global keys 20 Figure 9 LDTI operating in “legacy mode” 21 Figure A.1 Structure of the optical interface profile . 22 Figu

37、re A.2 Structure of the optical interface “operating in legacy mode” profile 24 Figure B.1 Structure of the TP with carrier signalling profile 25 Figure B.2 Structure of the TP with carrier signalling “operating in legacy mode” profile . 27 Figure C.1 Structure of the RS485/232 profile . 29 Figure D

38、.1 Structure of the “M-Bus with HDLC based data link layer” profile 31 Figure E.1 Structure of the IP profile 33 Table 1 Features of communication profiles using DLMS/COSEM compatible and legacy protocol modes 9 Table 2 Conformance block for the LDTI association. 16 Table 3 Configuration of a LDTI o

39、perating in “legacy mode“ 20 Table A.1 Mandatory setup attribute values for an optical IEC 62056-21 interface supporting IEC 62056-5-3 . 23 Table A.2 Mandatory setup attribute values for an optical IEC 62056-21 operating in the “legacy mode” . 24 Table B.1 Mandatory setup attribute values for a TP I

40、EC 62056-3-1 supporting IEC 62056-5-3 26 Table B.2 Mandatory setup attribute values for a TP IEC 62056-3-1 operating in the “legacy mode” . 28 Table C.1 Mandatory setup attribute values for an electrical RS485/232 IEC 62056-21 interface supporting IEC 62056-5-3 30 BS EN 62056-7-5:2016 4 IEC 62056-7-

41、5:2016 IEC 2016 Table D.1 Mandatory setup attribute values for an M-Bus port with HDLC based data link layer . 32 Table E.1 Mandatory setup attribute values for an IP port . 34 Table F.1 Configuration example: one value pushed every 10 s via optical port . 35 BS EN 62056-7-5:2016IEC 62056-7-5:2016 I

42、EC 2016 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTRICITY METERING DATA EXCHANGE THE DLMS/COSEM SUITE Part 7-5: Local data transmission profiles for Local Networks (LN) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

43、all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards,

44、Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory

45、 work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations

46、. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recom

47、mendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by an

48、y end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional pub

49、lication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability