EN 62074-1-2014 en Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1 Generic specification.pdf

1、BSI Standards PublicationFibre optic interconnecting devices and passive components Fibre optic WDM devicesPart 1: Generic specificationBS EN 62074-1:2014National forewordThis British Standard is the UK implementation of EN 62074-1:2014. It is identical to IEC 62074-1:2014. It supersedes BS EN 62074

2、-1:2009 which is withdrawn.The UK participation in its preparation was entrusted by TechnicalCommittee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre opticinterconnecting devices and passive components.A list of organizations represented on this committee can be obtained onrequest to its secr

3、etary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 78242 8ICS 33.180.01; 33.180.20Compliance with a British Stand

4、ard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 April 2014.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62074-1:2014EUROPEAN STANDARD EN 62074-1 NORME

5、 EUROPENNE EUROPISCHE NORM April 2014 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels 2014 CENELEC - All rights of explo

6、itation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62074-1:2014 E ICS 33.180.01; 33.180.20 Supersedes EN 62074-1:2009 English version Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification (IEC 62074-

7、1:2014) Dispositifs dinterconnexion et dispositifs passifs fibres optiques - Dispositifs WDM fibres optiques - Partie 1: Spcification gnrique (CEI 62074-1:2014) Lichtwellenleiter - Verbindungselemente und passive Bauteile - Lichtwellenleiter-WDM-Bauteile - Teil 1: Fachgrundspezifikation (IEC 62074-1

8、:2014) This European Standard was approved by CENELEC on 2014-03-13. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliogra

9、phical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the respons

10、ibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland

11、, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 62074-1:2014EN 62074-1:20

12、14 - 2 - Foreword The text of document 86B/3700/FDIS, future edition 2 of IEC 62074-1, prepared by SC 86B “Fibre optic interconnecting devices and passive components“ of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62074-1:2014. The following

13、dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-12-13 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-03-13 This document

14、 supersedes EN 62074-1:2009. EN 62074-1:2014 includes the following significant technical changes with respect to EN 62074-1:2009: substantial updating to the definitions; the addition of informative Annexes C to G, giving examples of technical information concerning WDM devices. Attention is drawn

15、to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62074-1:2014 was approved by CENELEC as a E

16、uropean Standard without any modification. BS EN 62074-1:2014- 3 - EN 62074-1:2014 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are

17、indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the

18、 relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60027 series Letter symbols to be used in electrical technology EN 60027series IEC 60050-731 - International Electrotechnical Vocabulary (IEV) Chapter 731: Optical fibre communication - - IEC 60695-11-5 - Fire hazard testing Part 11-5: T

19、est flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance EN 60695-11-5 - IEC 60825-1 - Safety of laser products Part 1: Equipment classification and requirements EN 60825-1 - IEC/TR 61931 - Fibre optic - Terminology - - ISO 129-1 - Technical drawings - Indication

20、 of dimensions and tolerances Part 1: General principles - - ISO 286-1 - Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits EN ISO 286-1 - ISO 1101 - Geometrical product specifications (GPS) - Geometrical toleran

21、cing - Tolerances of form, orientation, location and run-out EN ISO 1101 - ISO 8601 - Data elements and interchange formats - Information interchange - Representation of dates and times - - BS EN 62074-1:2014 2 62074-1 IEC:2014(E) CONTENTS 1 Scope 7 2 Normative references 7 3 Terms and definitions 8

22、 3.1 Basic term definitions . 8 3.2 Component definitions . 9 3.3 Performance parameter definitions 10 4 Requirements 25 4.1 Classification . 25 General 25 4.1.1Type . 25 4.1.2Style . 25 4.1.3Variant 26 4.1.4Assessment level 26 4.1.5Normative reference extension . 27 4.1.64.2 Documentation . 27 Symb

23、ols . 27 4.2.1Specification system . 27 4.2.2Drawings 28 4.2.3Measurements 29 4.2.4Test data sheets . 29 4.2.5Instructions for use . 29 4.2.64.3 Standardization system 29 Performance standards . 29 4.3.1Reliability standard . 30 4.3.2Interlinking 30 4.3.34.4 Design and construction . 31 Materials 31

24、 4.4.1Workmanship 31 4.4.24.5 Performance requirements . 31 4.6 Identification and marking 31 General 31 4.6.1Variant identification number 31 4.6.2Component marking 32 4.6.3Package marking 32 4.6.44.7 Safety 32 Annex A (informative) Transfer matrix 34 A.1 General 34 A.2 Transfer matrix 34 A.3 Trans

25、fer matrix coefficient 35 A.4 Logarithmic transfer matrix 35 Annex B (informative) Specific performances of WDM devices for bidirectional transmission system (example) 37 B.1 Generic 37 B.2 Definition of near-end isolation and near-end crosstalk 38 Annex C (informative) Transfer matrix as applicatio

26、ns of WDM devices (example) . 40 BS EN 62074-1:201462074-1 IEC:2014(E) 3 C.1 Generic 40 C.2 Wavelength multiplexer 40 C.3 Wavelength demultiplexer 41 C.4 Wavelength multiplexer/demultiplexer 42 C.5 Wavelength router 43 C.6 Wavelength channel add/drop 44 Annex D (informative) Example of technology of

27、 thin film filter WDM devices . 46 D.1 General 46 D.2 Thin film filter technology . 46 D.3 Typical characteristics of thin film filter 47 Annex E (informative) Example of technology of fibre fused WDM devices . 48 E.1 General 48 E.2 Typical characteristics of fibre fused WDM devices 49 Annex F (info

28、rmative) Example of arrayed waveguide grating (AWGs) technology 50 F.1 General 50 F.2 Typical characteristics of AWG 50 Annex G (informative) Example of FBG filter technology 52 G.1 General 52 G.2 Typical characteristics of FBG filter 53 Bibliography 54 Figure 1 Example of a six-port device, with tw

29、o input and four output ports 8 Figure 2 Illustration of channel wavelength range 11 Figure 3 Illustration of insertion loss 12 Figure 4 Illustration of ripple 12 Figure 5 Illustration of channel insertion loss variation . 13 Figure 6 Illustration of isolation wavelength 14 Figure 7 Illustration of

30、isolation wavelength range 15 Figure 8 Illustration of adjacent channel isolation . 16 Figure 9 Illustration of non-adjacent channel isolation 17 Figure 10 Illustration of maximum adjacent channel crosstalk 18 Figure 11 Illustration of maximum non-adjacent channel crosstalk . 19 Figure 12 Illustrati

31、on of channel extinction ratio . 21 Figure 13 Illustration of free spectral range 22 Figure 14 Illustration of polarization dependent centre wavelength (PDCW) . 23 Figure 15 Illustration of X dB bandwidth . 25 Figure 16 Wavelength-selective branching device 26 Figure 17 Wavelength-selective branchin

32、g device 26 Figure 18 Wavelength-selective branching device 26 Figure 19 Wavelength-selective branching device 26 Figure A.1 Example of a six-port device, with two input and four output ports 34 Figure A.2 Illustration of transfer matrix coefficient 35 Figure B.1 Uni-directional and bi-directional t

33、ransmission system application of a 1 x 2 DM device 37 Figure B.2 Illustration of a four-wavelength bidirectional system 39 BS EN 62074-1:2014 4 62074-1 IEC:2014(E) Figure C.1 Example of a wavelength multiplexer 40 Figure C.2 Example of a wavelength demultiplexer 41 Figure C.3 Example of a wavelengt

34、h multiplexer/demultiplexer 42 Figure C.4 Example of a wavelength router 43 Figure C.5 Example of wavelength channel add/drop . 44 Figure D.1 Schematic configuration of a thin film filter WDM device . 46 Figure D.2 Structure of multilayer thin film . 47 Figure D.3 Typical characteristics of 1 510 nm

35、 and C-band WDM device using thin film filter technology 47 Figure E.1 Structure of a fused bi-conical tapered 2x2 coupler . 48 Figure E.2 Typical scheme for a fused coupler . 49 Figure E.3 Typical characteristics of a fibre fused WDM device 49 Figure F.1 Basic configuration of AWG 50 Figure F.2 Exa

36、mple of AWG characteristics . 51 Figure G.1 Usage of fibre Bragg grating filter . 52 Figure G.2 Function and mechanism of fibre Bragg grating 52 Figure G.3 Example of FBG filter characteristics 53 Table 1 Three-level IEC specification structure 27 Table 2 Standards interlink matrix 31 BS EN 62074-1:

37、201462074-1 IEC:2014(E) 7 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC WDM DEVICES Part 1: Generic specification 1 Scope This part of IEC 62074 applies to fibre optic wavelength division multiplexing (WDM) devices. These have all of the following general features: they are

38、passive, in that they contain no optoelectronic or other transducing elements; however they may use temperature control only to stabilize the device characteristics; they exclude any optical switching functions; they have three or more ports for the entry and/or exit of optical power, and share opti

39、cal power among these ports in a predetermined fashion depending on the wavelength; the ports are optical fibres, or optical fibre connectors. This standard establishes uniform requirements for the following: optical, mechanical and environmental properties. 2 Normative references The following docu

40、ments, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60027 (all parts), Le

41、tter symbols to be used in electrical technology IEC 60050-731, International Electrotechnical Vocabulary Chapter 731: Optical fibre communication IEC 60695-11-5, Fire hazard testing Part 11-5: Test flames Needle-flame test method Apparatus, confirmatory test arrangement and guidance IEC 60825-1, Sa

42、fety of laser products Part 1: Equipment classification and requirements IEC 61931, Fibre optics Terminology ISO 129-1, Technical drawings Indication of dimensions and tolerances Part 1: General principles ISO 286-1, Geometrical product specifications (GPS) ISO coding system for tolerances of linear

43、 sizes Part 1: Bases of tolerances and fits ISO 1101, Geometrical product specifications (GPS) Geometrical tolerancing Tolerances of form, orientation, location and run-out ISO 8601, Data elements and interchange formats Information interchange Representation of dates and times BS EN 62074-1:2014 8

44、62074-1 IEC:2014(E) 3 Terms and definitions For the purposes of this document, the terms and definitions given in IEC 60050-731, as well as the following, apply. 3.1 Basic term definitions 3.1.1port optical fibre or optical fibre connector attached to a passive device for the entry and/or exit of th

45、e optical power 3.1.2transfer matrix optical properties of a fibre optic wavelength-selective branching device can be defined in terms of an n x n matrix of coefficients, where n is the number of ports, and the coefficients represent the fractional optical power transferred between designated ports

46、Note 1 to entry: A detailed explanation of the transfer matrix is shown in Annex A. The ports are numbered sequentially, so that the transfer matrix is developed to show all ports and all possible combinations. The port numbering is arbitrary. Note 2 to entry: Figure 1 below shows an example of a si

47、x-port device, with two input ports and four output ports. This WDM device can operate as four input ports and two output ports for their reciprocity characteristics. Also, it shall be noted that a combination of input and output port number can be selected, for example, 1 input port and 5 output po

48、rts, 3 input ports and 3 output ports and so on, especially for bi-directional transmission system application. Refer to Annex B. Outputs Inputs 1 4 2 5 6 3 IEC 0069/14 Figure 1 Example of a six-port device, with two input and four output ports Note 3 to entry: If there are four operating wavelength

49、s, then the resulting transfer matrix becomes a 6 6 4 matrix: Optical attenuation at 1from port 1 to port 6 would use a161. Return loss of port 2 at 4would use a224. Optical attenuation from port 5 to port 2 at 3would use a523. 3.1.3transfer matrix coefficient element tijof the transfer matrix Note 1 to entry: tijis the number of more than or equal to zero, and less than or equal to one. Note 2 to