EN 62149-6-2003 en Fibre optic active components and devices Performance standards Part 6 650-nm 250-Mbit s plastic optical fibre transceivers《光纤有源元件和器件的性能标准 第6部分 650nm 250Mbit s塑料.pdf

1、BRITISH STANDARD BS EN 62149-6:2003 Fibre optic active components and devices Performance standards Part 6: 650-nm 250-Mbit/s plastic optical fibre transceivers The European Standard EN 62149-6:2003 has the status of a British Standard ICS 33.180.20 BS EN 62149-6:2003 This British Standard was publi

2、shed under the authority of the Standards Policy and Sttrategy Committee on 20 January 2004 BSI 20 January 2004 ISBN 0 580 43168 1 National foreword This British Standard is the official English language version of EN 62149-6:2003. It is identical with IEC 62149-6:2003. The UK participation in its p

3、reparation was entrusted by Technical Committee GEL/86, Fibre optics, to Subcommittee GEL/86/3, Fibre optic systems and active devices, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British

4、Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.

5、 This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible

6、international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the

7、 EN title page, pages 2 to 13 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 62149-6 NORME EUROPENNE EUROPISCHE NORM November 2003 CENELEC European Commi

8、ttee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC

9、members. Ref. No. EN 62149-6:2003 E ICS 33.180.20 English version Fibre optic active components and devices Performance standards Part 6: 650-nm 250-Mbit/s plastic optical fibre transceivers (IEC 62149-6:2003) Composants et dispositifs actifs fibres optiques Normes de fonctionnement Partie 6: Emette

10、urs-rcepteurs de 650 nm 250 Mbit/s fibres optiques en plastique (CEI 62149-6:2003) Aktvive Lichtwellenleiterbauelemente und -gerte Betriebsverhaltensnorm Teil 6: 650 nm, 250 Mbit/s Kunststoff- lichtwellenleiter-Sende- und Empfangsmodule (IEC 62149-6:2003) This European Standard was approved by CENEL

11、EC on 2003-11-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standard

12、s may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notifie

13、d to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta, Netherlands, Norway,

14、 Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. EN 64129-:60023 - - 2 Foreword The text of document 86C/544/FDIS, future edition 1 of IEC 62149-6, prepared by SC 86C, Fibre optic systems and active devices, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vot

15、e and was approved by CENELEC as EN 62149-6 on 2003-11-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2004-08-01 latest date by which the national standards conflicting w

16、ith the EN have to be withdrawn (dow) 2006-11-01 Annexes designated “normative“ are part of the body of the standard. In this standard, annexes A and ZA are normative. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62149-6:2003 was approved by CEN

17、ELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60191 NOTE Harmonized in EN 60191 series (not modified). IEC 61280 NOTE Harmonized in EN 61280 series (not modified). IEC 61281-1-1 N

18、OTE Harmonized as EN 61281-1-1:1999 (not modified). IEC 62007-1 NOTE Harmonized as EN 62007-1:2000 (not modified). IEC 62007-2 NOTE Harmonized as EN 62007-2:2000 (not modified). _ Page2 EN621496:200362149-6 IEC:2003 3 CONTENTS OFREWODR 5 INTRODUCTION4 1 Scope 5 2 Normative references. 5 3 Symbols. 5

19、 4 Product parameters . 6 4.1 Absolute limiting ratings 6 4.2 Operating environment . 7 4.3 Functional specification 7 4.4 Diagrams 8 4.4.1 Schematic diagram: Receiver section . 8 4.4.2 Schematic diagram: Transmitter section 8 5 Testing 8 5.1 Characterization testing 8 5.1.1 Characterization: Transm

20、itter section 9 5.1.2 Characterization: Receiver section 9 5.2 Performance testing 9 5.2.1 Sample size, sequencing and groupings 10 5.2.2 Performance testing.10 6 Safety.10 Annex A (normative) Test requirements .11 Bibliogrpahy31 Figure 1 eRceiver section scehmatci diagram.8 . Figure 2 Transmtiter s

21、ection schematic diagram.8 . Tbale 1 Absolute limitign ratigns.6 . Tbale 2 Operating nevironment 7 . Tbale 3 Functioanl specification .7 . Tbale 4 Transmtiter section characterization tests9 . Tbale 5 Receivre section cahracterizatino tests9 . Tbale 6 Performnacet est plan01 Tbale A. 1 Sample size,

22、seuqnecina gnd grouping requiremstne .11 64129-CEI 6:0230 3 TNOCENTS FOREWORD 5 NITRODCUTION4 1 Scope .5 . 2 Normative references5 . 3 Symobls5 . 4 Producap trameters 6 . 4.1 Absolute limitign ratigns.6 . 4.2 Operating nevironment 7 . 4.3 Functioanl specification .7 . 4.4 Diagrams.8 . 4.4.1 Scehmatc

23、i diagram: Receivre section 8 . 4.4.2 Scehmatci diagram: Transmtiter sectio.n8 . 5 Testing .8 . 5.1 Characterization testing.8 . 5.1.1 Characterizatino: Transmtiter section.9 . 5.1.2 CharacterizatinoeR :ceiver section.9 . 5.2 Performnacet esting.9 . 5.2.1 Sample size, sqeuencign nad gropuisgn 01 5.2

24、.2 Performnacet esting.01 6 Safety.01 Annex A (normative) Test requiremenst .11 Bibliography13 Figure 1 Receiver section schematic diagram 8 Figure 2 Transmitter section schematic diagram 8 Table 1 Absolute limiting ratings 6 Table 2 Operating environment . 7 Table 3 Functional specification 7 Table

25、 4 Transmitter section characterization tests. 9 Table 5 Receiver section characterization tests. 9 Table 6 Performance test plan10 Table A.1 Sample size, sequencing and grouping requirements .11 Annex ZA (normative) Normative references to international publications with their corresponding Europea

26、n publications . 12 Page3 EN621496:200364129-CEI 6:0230 9 INTRODUCTION Plastic optical fibre transceivers are used to convert electrical signals into optical signals and vice-versa. This part of IEC 62149 covers the performance standards for transceivers for plastic optical fibre applications. Page4

27、 EN621496:200362149-6 IEC:2003 11 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES PERFORMANCE STANDARDS Part 6: 650-nm 250-Mbit/s plastic optical fibre transceivers 1 Scope This part of IEC 62149 specifies the performance standards for 650 nm 250 Mbps transceivers for plastic optical fibre application. It

28、 specifies the parameters which apply, with clearly defined conditions, severities, and pass/fail criteria. The tests are intended to be run as an initial design verification to prove any products ability to satisfy the performance standards requirements. A product that has been shown to meet all th

29、e requirements of a performance standard can be declared as complying with the performance standard, but should then be controlled by a quality assurance/quality conformance program. 2 Normative references The following referenced documents are indispensable for the application of this document. For

30、 dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60068-2-20: Basic environmental testing procedures Part 2: Tests Test T: Soldering IEC 60793-2 (all parts): Optical fibres Part 2: Product

31、specifications IEC 60950 (all parts): Safety of information technology equipment MIL-STD-883: Microcircuits UL 94: Test for Flammability of Plastic Materials for Parts in Devices and Appliances 3 Symbols For the purpose of this part of IEC 62149, the following symbols apply: E x Extinction ratio P o

32、 Fibre launched power RH Relative humidity S Receiver sensitivity T amb Ambient temperature T CASE Operating case temperature t f Fall time 4egaP 3002:694126NEPage5 EN621496:200362149-6 IEC:2003 13 t r Rise time T stg Storage temperature V cc Power supply voltage V I Data input voltage V IH -V CC Da

33、ta input voltage (high) V IL -V CC Data input voltage (low) V nom Nominal operating voltage V OH -V CC Data output voltage (high) V OL -V cc Data input voltage (low) Spectral radiation bandwidth c Central wavelength 4 Product parameters 4.1 Absolute limiting ratings Absolute limiting (maximum and/or

34、 minimum) ratings, which are listed in Table 1, imply that no catastrophic damage will occur if the product is subject to these ratings for short periods, provided each limiting is applied separately and all other parameters have values within their ranges of variability. It should not be assumed th

35、at limiting values of more than one parameter can be applied at any one time. Table 1 Absolute limiting ratings Requirement Parameter Symbol Minimum Maximum Unit Operating case temperature T CASE aa C Storage temperature T stg 40 85 C Power supply voltage V CC 0,5 7,0 V Data input voltage V I 0,5 V

36、CC + 0,5 V a This shall be specified by each vendor. 7egaP 3002:694126NEPage6 EN621496:2003Page5 EN621496:2003Page6 EN621496:200362149-6 IEC:2003 15 4.2 Operating environment Table 2 Operating environment Parameter Symbol Minimum Maximum Unit Power supply voltagea V cc (V nom 5 %) (V nom+ 5 %) V Amb

37、ient temperature T amb 07 0 C Relative humidityb RH 59 5% aNominal operating voltages (V nom ) of 5 V apply. b No condensation allowed. 4.3 Functional specification The specifications given in Table 3 describe the functional requirements which shall be satisfied for the operating environmental condi

38、tions specified in Table 2. Table 3 Functional specification Parameter Condition T case = 25 C, unless otherwise specified Symbol Minimum Maximum Unit Transmission speed 1 250 Mb/s SI-POFa 50 m Transmission distance GI-HPCFb 100 m SI-POF, 50 cma, e P o 9 3 dBm Fibre launched power GI-HPCF, 50 cmb, e

39、 P o 21 15 dBm Central wavelength C 640 660 nm Spectral radiation bandwidth 40 nm Rise time 10 % - 90 %c, e t r 3,0 ns Fall time 90 % - 10 %c, e t f 3,0 ns Extinction ratio E X 10 dB SI-POF, BER = 10 12 a, c 2 dBm Overload GI-HPCF, BER = 10 12 b, c 14 dBm SI-POF, BER = 10 12 a, c S 21 dBm Receiver s

40、ensitivity GI-HPCF, BER = 10 12 b, c S 24 dBm Data input voltage (high) V IH -V CC 1,070 0,840 V Data input voltage (low) V IL -V CC 1,950 1,570 V Data output voltage (high)d V OH -V CC 1,100 0,880 V Data output voltage (low)d V OL -V CC 1,840 1,620 V aUsing the POF Defined IEC 60793-2 Category A4d.

41、 bUsing the HPCF Defined IEC 60793-2 Category A3c. c250 Mb/s, NRZ, 2 7 -1, PRBS, Mark density . dOutput compatibles with ECL and PECL input. eReference: IEC 61280. Page8 3002:694126NEPage7 EN621496:20036egaP EN621496:2003Page7 EN621496:200362149-6 IEC:2003 17 4.4 Diagrams 4.4.1 Schematic diagram: Re

42、ceiver section A representative example of a receiver section is shown in Figure 1. Level detector Low pass filter Linear amplifier Limiting amplifier Buffer DATA out DATA out SD PIN preamplifier Figure 1 Receiver section schematic diagram 4.4.2 Schematic diagram: Transmitter section A representativ

43、e example of a transmitter section is shown in Figure 2. LED modulator ECL INPUT DATA DATA LED Figure 2 Transmitter section schematic diagram 5 Testing Initial characterization and qualification shall be undertaken when a build standard has been completed and frozen. Qualification maintenance is car

44、ried using periodic testing programs. Test conditions for all tests unless otherwise stated are 25 C 2 C. 5.1 Characterization testing Characterization shall be carried out on at least 20 transceivers taken from at least three different manufacturing lots. The characterization test conditions applyi

45、ng to the transmitter section and the receiver section are listed in Tables 4 and 5 respectively. 9egaP 3002:694126NEPage8 EN621496:2003Page7 EN621496:2003Page8 EN621496:200362149-6 IEC:2003 19 5.1.1 Characterization: Transmitter section Table 4 Transmitter section characterization tests Parameter T

46、est conditions Test limit Minimum Test limit Maximu m Unit A minimum of 20 devices to be measured at T CASE= (0 2) C, (25 2) C and (70 2) C and V ccat (V nom 5 %) V and (V nom ) V and (V nom + 5 %) Va SI-POF, 50 cm 9,0 3,0 Fibre launched power PRBS 27-1 at 250 Mbit/s modulation GI-HPCF, 50 cm 21,0 1

47、5,0 dBm Central wavelength PRBS 27-1 at 250 Mbit/s modulation 640 660 nm Spectral radiation bandwidth PRBS 27-1 at 250 Mbit/s modulation 40 nm Extinction ratio 250 Mbit/s square wave 10 DB a Manufacturing lot shall be specified by each vendor. 5.1.2 Characterization: Receiver section Table 5 Receive

48、r section characterization tests Parameter Test conditions Test limit Minimum Test limit Maximum Unit A minimum of 20 devices to be measured at T CASE= (0 2) C, (25 2) C and (70 2) C and V ccat (V nom 5 %) V and (V nom ) V and (V nom + 5 %) Va SI-POF 21,0 Receiver sensitivity at 1E-12 BER PRBS modulation NRZ at 250 Mbit/s assuming 10 dB extinction ratio source GI-HPCF 24,0 dBm Signal detect level high Referenced to V cc , output 50 terminated to (V cc -2) V or equivalent. 1,10 0,88 V Signal detect level low Referenced to V cc , output