EN 62196-1-2012 en Plugs socket-outlets vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1 General requirements (Incorporates Amendment A12 2.pdf

1、BSI Standards PublicationPlugs, socket-outlets, vehicle connectors and vehicle inlets Conductive charging of electric vehiclesPart 1: General requirementsBS EN 62196-1:2012+A12:2014BS EN 62196-1:2012+A12:2014National forewordThis British Standard is the UK implementation of EN 62196-1:2012+A12:2014.

2、 It is derived from IEC 62196-1:2011. It supersedes BS EN 62196-1:2012+A11:2013, which will be withdrawn on 16 June 2017.Where a common modification has been introduced by amendment, the tags carry the number of the amendment. For example, the common modifications introduced by CENELEC amendment A11

3、 are indicated by hi.The UK participation in its preparation was entrusted by Technical Committee PEL/23, Electrical accessories, to Subcommittee PEL/23/4, Protected type plugs and sockets.A list of organizations represented on this subcommittee can be obtained on request to its secretary.This publi

4、cation does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014ISBN 978 0 580 85337 1ICS 29.120.30; 43.120Compliance with a British Standard cannot confer

5、 immunity fromlegal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2012.Amendments/corrigenda issued since publicationDate Text affected31 July 2013 Implementation of CENELEC amendment A11:201330 September 2014 Implementa

6、tion of CENELEC amendment A12:2014BRITISH STANDARDEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B

7、- 1000 Brussels 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62196-1:2012 E ICS 29.120.30; 43.120 English version Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Pa

8、rt 1: General requirements (IEC 62196-1:2011) Fiches, socles de prise de courant, prises mobiles et socles de connecteur de vhicule - Charge conductive des vhicules lectriques - Partie 1: Rgles gnrales (CEI 62196-1:2011) Stecker, Steckdosen, Fahrzeugkupplungen und Fahrzeugstecker - Konduktives Laden

9、 von Elektrofahrzeugen - Teil 1: Allgemeine Anforderungen (IEC 62196-1:2011) This European Standard was approved by CENELEC on 2012-02-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a na

10、tional standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German).

11、 A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bu

12、lgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

13、August 2014EN 62196-1:2012+A12- 2 - Foreword The text of document 23H/266/FDIS, future edition 2 of IEC 62196-1, prepared by SC 23H, “Industrial plugs and socket-outlets“, of IEC TC 23, “Electrical accessories“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62196-1:2012

14、. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-11-01 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-02-

15、01 This document supersedes EN 62196-1:2003. EN 62196-1:2012 includes the following significant technical changes with respect to EN 62196-1:2003: increase in d.c.voltage for accessories; permitted use of accessories with vehicles complying with 7.2.3.1 of EN 61851-1:2011; minor changes to definitio

16、ns; additional voltage and current ratings (Clause 5) and test values (Clauses 12 and 13) ; removal of markings to identify generic types of vehicle inlets and connectors; addition of a “high power d.c.” to the type of accessories covered by the Standard; modification of the description of “universa

17、l” and “basic” interfaces based on changes to EN 61851-1:2011; simplification of the marking requirements (Clause 8); additional requirements for accessories with shutters; division of Clause 9 to create Clauses 9 and 11; Clause 9: specific requirements for inlet, plug and socketoutlet; Clause 11: E

18、VSE (Electric Vehicle Supply Equipment) requirements: the basic generic requirements for charging stations; renumbering of annexes. This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). Attenti

19、on is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. BS EN 62196-1:2012+A12:2014 EN 62196-1:2012+A12:2014 (E)- 3 - Endorsement notice The text of

20、the International Standard IEC 62196-1:2011 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60068-2-75:1997 NOTE Harmonized as EN 60068-2-75:1997 (not modified).

21、IEC 60309-1 NOTE Harmonized as EN 60309-1. IEC 61008-1 NOTE Harmonized as EN 61008-1. IEC 61009-1 NOTE Harmonized as EN 61009-1. _ This document (EN 62196-1:2012/A11:2013) has been prepared by CLC/TC 23BX “Switches, boxes and enclosures for household and similar purposes, plugs and socket outlets fo

22、r d.c. and for the charging of electrical vehicles including their connectors“. The following dates are fixed: latest date by which this document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-10-15 latest date by which the natio

23、nal standards conflicting with this document have to be withdrawn (dow) 2017-10-15 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Thi

24、s document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association. This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). Foreword

25、to amendment A11This document (EN 62196-1:2012/A12:2014) has been prepared by CLC/TC 23BX “Switches, boxes and enclosures for household and similar purposes, plugs and socket outlets for d.c. and for the charging of electrical vehicles including their connectors“. The following dates are fixed: late

26、st date by which this document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2015-06-16 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2017-06-16 This standard covers the Princip

27、le Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for

28、identifying any or all such patent rights. Foreword to amendment A12BS EN 62196-1:2012+A12:2014 EN 62196-1:2012+A12:2014 (E)- 4 - Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are n

29、ormatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified b

30、y common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60112 + corr. October + corr. June + A1 2003 2003 2003 2009 Method for the determination of the proof and the comparative tracking indices of solid insulating materials EN 60112 + A1 2003 20

31、09 IEC 60227 Series Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - - IEC 60228 2004 Conductors of insulated cables EN 60228 + corr. May 2005 2005 IEC 60245-4 (mod) + A1 + A2 1994 1997 2003 Cables of rated voltages up to and including 450/750 V and having cross-

32、linked insulation -Part 4: Cords and flexible cables HD 22.4 S31)+ A1 + A21995 1999 2002 IEC 60269-1 + A1 2006 2009 Low-voltage fuses - Part 1: General requirements EN 60269-1 + A1 2007 2009 IEC 60269-2 (mod) 2010 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized

33、 persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to J HD 60269-2 2010 IEC 60309-4 - Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock EN 60309-4 - IEC 60529 + A1 1989 1

34、999 Degrees of protection provided by enclosures (IP Code) EN 60529 + corr. May + A1 1991 1993 2000 IEC 60664-1 2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests EN 60664-1 2007 IEC 60664-3 2003 Insulation coordination for equipment wi

35、thin low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution EN 60664-3 2003 IEC 60695-2-11 + corr. January 2000 2001 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products EN 60695-2-11 20

36、01 IEC 60695-10-2 - Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test EN 60695-10-2 - 1) HD 22.4 S3 is superseded by HD 22.4 S4:2004. BS EN 62196-1:2012+A12:2014 EN 62196-1:2012+A12:2014 (E)- 5 - Publication Year Title EN/HD Year IEC 60947-1 - Low-voltage switchgear and controlgear

37、 - Part 1: General rules EN 60947-1 - IEC 60999-1 1999 Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm up to 35 mm (includ

38、ed) EN 60999-1 2000 IEC 60999-2 2003 Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm up to 300 mm (included) EN 60999-2 2003 IEC 61851-1 2010 Elect

39、ric vehicle conductive charging system - Part 1: General requirements EN 61851-1 2011 ISO 1456 - Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium EN ISO 1456 - ISO 2081 - Metallic and other i

40、norganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel EN ISO 2081 - ISO 2093 - Electroplated coatings of tin - Specification and test methods - - _ BS EN 62196-1:2012+A12:2014 EN 62196-1:2012+A12:2014 (E)- 6 - Annex ZB (normative) Special national conditio

41、ns Special national condition: National characteristic or practice that cannot be changed even over a long period, e.g. climatic conditions, electrical earthing conditions. NOTE If it affects harmonization, it forms part of the European Standard / Harmonization Document. For the countries in which t

42、he relevant special national conditions apply these provisions are normative, for other countries they are informative. Clause Special national condition 1 Italy In Italy, in case of charging in mod1 and mod2 by socket outlets according to CEI 23-50, the charging current is limited to 10 A. 1 United

43、 Kingdom Mode 1 will not be used in the United Kingdom. 9.1 Italy In Italy, plugs and sockets outlet shall also comply with EN 62196-2. 10.1 France Accessories shall be so designed that live parts of socket-outlets and vehicle connectors, when they are wired as in normal use, and live parts of plugs

44、 and vehicle inlets, when they are in partial or complete engagement with the complementary accessories, are not accessible. Add the two following paragraphs after the above paragraph: Shutters are compulsory on live (phase and neutral) contact holes of socket-outlets when these socket-outlets are a

45、ccessible to uninstructed persons (ordinary persons BA1, handicapped persons BA2 or children BA3). Shutters are compulsory on live (phase and neutral) contact holes of connectors when these connectors are permanently wired to the fixed installation and are accessible to uninstructed persons (ordinar

46、y persons BA1, handicapped persons BA2 or children BA3). 10.1 Germany IPxxB concerning protection against electric shock is sufficient for plugs, sockets, vehicle connectors, vehicle inlets and cable assemblies as described by this standard. 10.1 Italy In Italy, in case of EV charging mode 3 shutter

47、s or equivalent safety system are compulsory on live (phase and neutral) contact holes of socket-outlets or connectors. 10.1 Portugal Shutters are compulsory on live (phase and neutral) contact holes of socket-outlets and connectors not exceeding 16 A when these accessories are accessible to uninstr

48、ucted persons (ordinary persons BA1, handicapped persons BA2 or children BA3). In locations with restricted access to skilled persons, socket-outlets and connectors without shutters may be accepted. 10.1 Switzerland IPxxB concerning protection against electric shock is sufficient for plugs, sockets,

49、 vehicle connectors, vehicle inlets and cable assemblies as described by this standard. hi10.1 Spain For installations in dwellings and for 16 A applications, Wiring Rules prescribe the use of socket-outlets with shutters. jkBS EN 62196-1:2012+A12:2014 EN 62196-1:2012+A12:2014 (E) 2 CONTENTS INTRODUCTION . 6 1 Scope . 7 2 Normative references . 7 3 Terms and definitions . 9 4 General 13 5 Ratings . 14 6 Connection between the power supply and the electric vehicle . 15 7 Classification of accessories 17