1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationHigh-voltage switchgear and controlgearPart 204: Rigid gas-insulated transmission lines for rated voltage above 52kVBS EN 62271-204:2011National forewordThis British Standard is
2、the UK implementation of EN 62271-204:2011. It is identical to IEC 62271-204:2011.The UK participation in its preparation was entrusted by Technical Committee PEL/17, Switchgear, controlgear, and HV-LV co-ordination, to Subcommittee PEL/17/1, High-voltage switchgear and controlgear.A list of organiz
3、ations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011ISBN 978 0 580 68218 6 ICS 29.130.10Compliance with a British Standard
4、cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2011.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 62271-204:2011EUROPEAN STANDARD EN 62271-204 NOR
5、ME EUROPENNE EUROPISCHE NORM September 2011 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2011 CENELEC - All rights of exploitatio
6、n in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62271-204:2011 E ICS 29.130.10 English version High-voltage switchgear and controlgear - Part 204: Rigid gas-insulated transmission lines for rated voltage above 52 kV (IEC 62271-204:2011) Appareillage haute tension -
7、 Part 204: Lignes de transport rigides isolation gazeuse de tension assigne suprieure 52 kV (CEI 62271-204:2011) Hochspannungs-Schaltgerte und -Schaltanlagen - Teil 204: Starre gasisolierte bertragungsleitungen fr Bemessungsspannungen ber 52 kV (IEC 62271-204:2011) This European Standard was approve
8、d by CENELEC on 2011-08-30. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationa
9、l standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language a
10、nd notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
11、Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 62271-204:2011EN 62271-204:2011 - 2 - Foreword The text of document 17C/510/FDIS, future edition 1 of IEC 62271-204, prepared by SC 1
12、7C, “High-voltage switchgear and controlgear assemblies“, of IEC TC 17, “Switchgear and controlgear“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62271-204:2011. The following dates are fixed: latest date by which the document has to be implemented at national level b
13、y publication of an identical national standard or by endorsement (dop) 2012-05-30 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2014-08-30 Attention is drawn to the possibility that some of the elements of this document may be the subject of pa
14、tent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62271-204:2011 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography
15、, the following note has to be added for the standard indicated: 1 IEC 60071-1 NOTE Harmonized as EN 60071-1. BS EN 62271-204:2011- 3 - EN 62271-204:2011 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced do
16、cuments are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modificat
17、ions, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60050-151 - International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices - - IEC 60050-441 1984 International Electrotechnical Vocabulary (IEV) - Chapter 441: Switchgear, contro
18、lgear and fuses - - IEC 60060-1 - High-voltage test techniques - Part 1: General definitions and test requirements EN 60060-1 - IEC 60068-1 - Environmental testing - Part 1: General and guidance EN 60068-1- IEC 60229 2007 Tests on cable oversheaths which have a special protective function and are ap
19、plied by extrusion EN 60229 2008 IEC 60270 - High-voltage test techniques - Partial discharge measurements EN 60270 - IEC 60287-3-1 1995 Electric cables - Calculation of the current rating - Part 3: Sections on operating conditions - Section 1: Reference operating conditions and selection of cable t
20、ype - - IEC 60376 - Specification of technical grade sulfur hexafluoride (SF6) for use in electrical equipment EN 60376 - IEC 60480 - Guidelines for the checking and treatment of sulphur hexafluoride (SF6) taken from electrical equipment and specification for its re-use EN 60480 - IEC 60529 1989 Deg
21、rees of protection provided by enclosures (IP Code) EN 60529 + corr. May 1991 1993 IEC 62271-1 2007 High-voltage switchgear and controlgear - Part 1: Common specifications EN 62271-1 2008 IEC 62271-203 201X1)High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear
22、for rated voltages above 52 kV EN 62271-203 201X1)IEC/TR 62271-303 - High-voltage switchgear and controlgear - Part 303: Use and handling of sulphur hexafluoride (SF6) CLC/TR 62271-303 - 1)To be published. BS EN 62271-204:2011EN 62271-204:2011 - 4 - Publication Year Title EN/HD Year ISO/IEC Guide 51
23、 - Safety aspects - Guidelines for their inclusion in standards - - BS EN 62271-204:2011 2 62271-204 IEC:2011 CONTENTS 1 General 7 1.1 Scope 7 1.2 Normative references 7 2 Normal and special service conditions . 8 2.101 Installation in open air . 8 2.102 Buried installation . 9 2.103 Installation in
24、 tunnel, shaft or similar situation . 9 3 Terms and definitions . 9 4 Ratings . 11 4.1 Rated voltage (Ur) . 11 4.2 Rated insulation level . 11 4.3 Rated frequency (fr) . 11 4.4 Rated normal current and temperature rise 11 4.5 Rated short-time withstand current (Ik) 12 4.6 Rated peak withstand curren
25、t (Ip) 12 4.7 Rated duration of short circuit (tk) 12 4.8 Rated supply voltage of closing and opening devices and of auxiliary and control circuits (Ua) . 12 4.9 Rated supply frequency of closing and opening devices and of auxiliary circuits 12 4.10 Rated pressure of compressed gas supply for contro
26、lled pressure systems 13 4.11 Rated filling levels for insulation and/or operation . 13 5 Design and construction 13 5.1 Requirements for liquids in GIL 13 5.2 Requirements for gases in GIL . 13 5.3 Earthing . 13 5.4 Auxiliary and control equipment . 14 5.5 Dependent power operation . 14 5.6 Stored
27、energy operation . 14 5.7 Independent manual or power operation (independent unlatched operation) . 14 5.8 Operation of releases 14 5.9 Low- and high-pressure interlocking and monitoring devices 14 5.10 Nameplates . 15 5.11 Interlocking devices . 15 5.12 Position indication 16 5.13 Degree of protect
28、ion provided by enclosures 16 5.14 Creepage distances for outdoor insulators . 16 5.15 Gas and vacuum tightness . 16 5.16 Liquid tightness . 17 5.17 Fire hazard (flammability) 17 5.18 Electromagnetic compatibility (EMC) 17 5.19 X-ray emission . 17 5.20 Corrosion 17 5.101 Internal fault . 18 5.102 En
29、closures 19 BS EN 62271-204:201162271-204 IEC:2011 3 5.103 Partitions and partitioning 20 5.104 Sections of a GIL system 21 5.105 Pressure relief 21 5.106 Compensation of thermal expansion 22 5.107 External vibration 22 5.108 Supporting structures for non-buried GIL . 22 6 Type tests . 23 6.1 Genera
30、l . 23 6.2 Dielectric tests . 24 6.3 Radio interference voltage (r.i.v.) test 26 6.4 Measurement of the resistance of circuits 26 6.5 Temperature-rise tests. 26 6.6 Short-time withstand current and peak withstand current tests 26 6.7 Verification of the protection 27 6.8 Tightness tests 27 6.9 Elect
31、romagnetic compatibility tests (EMC) 28 6.10 Additional test on auxiliary and control circuits . 28 6.11 X-radiation test procedure for vacuum interrupters . 28 6.101 Proof tests for enclosures . 28 6.102 Destructive pressure tests . 28 6.103 Anti-corrosion tests for buried installation 28 6.104 Spe
32、cial mechanical test on sliding contacts . 29 6.105 Test under conditions of arcing due to internal fault . 30 6.106 Weatherproofing test 31 7 Routine tests 31 7.1 Dielectric tests on the main circuits 31 7.2 Dielectric tests on auxiliary and control circuits 31 7.3 Measurement of the resistance of
33、the main circuit 31 7.4 Tightness test 31 7.5 Design and visual checks. 31 7.101 Partial discharge measurement . 31 7.102 Pressure tests of factory made enclosures 32 8 Guide to the selection of GIL . 32 8.101 Short time overload capability . 32 8.102 Forced cooling 32 9 Information to be given with
34、 enquiries, tenders and orders 32 9.101 Information with enquiries and orders 32 9.102 Information with tenders and contract documentation 34 10 Transport, storage, installation, operation and maintenance 35 10.1 Conditions during transport, storage and installation 35 10.2 Installation . 35 10.3 Op
35、eration 36 10.4 Maintenance 40 11 Safety . 40 11.1 Precautions by manufacturers 41 11.2 Precautions by users . 41 11.3 Electrical aspects 41 BS EN 62271-204:2011 4 62271-204 IEC:2011 11.4 Mechanical aspects . 41 11.5 Thermal aspects 41 11.101 Maintenance aspects 41 12 Influence of the product on the
36、 environment 42 Annex A (informative) Estimation of continuous current 43 Annex B (informative) Earthing . 48 Annex C (normative) Long-term testing of buried installations . 52 Bibliography 54 Figure B.1 Example of earthing system together with active anti-corrosion system in the case of solid bondi
37、ng of the enclosure at both ends . 51 Table 1 Second characteristic numeral of IP coding 16 BS EN 62271-204:201162271-204 IEC:2011 7 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR Part 204: Rigid gas-insulated transmission lines for rated voltage above 52 kV 1 General 1.1 Scope This part of IEC 62271 appli
38、es to rigid HV gas-insulated transmission lines (GIL) in which the insulation is obtained, at least partly, by a non-corrosive insulating gas, other than air at atmos-pheric pressure, for alternating current of rated voltages above 52 kV, and for service frequencies up to and including 60 Hz. It is
39、intended that this international standard be used where the provisions of IEC 62271-203 do not cover the application of GIL (see NOTE 3). At each end of the HV gas-insulated transmission line, a specific element may be used for the connection between the HV gas-insulated transmission line and other
40、equipment like bushings, power transformers or reactors, cable boxes, metal-enclosed surge arresters, voltage transformers or GIS, covered by their own specification. Unless otherwise specified, the HV gas-insulated transmission line is designed to be used under normal service conditions. NOTE 1 In
41、this international standard, the term “HV gas-insulated transmission line“ is abbreviated to “GIL“. NOTE 2 In this international standard, the word “gas“ means gas or gas mixture, as defined by the manufacturer. NOTE 3 Examples of GIL applications are given: where all or part of the HV gas-insulated
42、 transmission line is directly buried; or where the HV gas-insulated transmission line is located, wholly or partly, in an area accessible to public; or where the HV gas-insulated transmission line is long and the typical gas compartment length exceeds the common practice of GIS technology. 1.2 Norm
43、ative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60050-151, International Ele
44、ctrotechnical Vocabulary (IEV) Part 151: Electrical and magnetic devices IEC 60050-441:1984, International Electrotechnical Vocabulary (IEV) Chapter 441: Switchgear, controlgear and fuses IEC 60060-1, High-voltage test techniques Part 1: General definitions and test requirements IEC 60068-1, Environ
45、mental testing Part 1: General and guidance IEC 60229:2007, Electric cables Tests on extruded oversheaths with a special protective function BS EN 62271-204:2011 8 62271-204 IEC:2011 IEC 60270, High-voltage test techniques Partial discharge measurements IEC 60287-3-1:1995, Electric cables Calculatio
46、n of the current rating Part 3-1: Sections on operating conditions Reference operating conditions and selection of cable type IEC 60376, Specification of technical grade sulfur hexafluoride (SF6) for use in electrical equipment IEC 60480, Guidelines for the checking and treatment of sulfur hexafluor
47、ide (SF6) taken from electrical equipment and specification or its re-use IEC 60529:1989, Degrees of protection provided by enclosures (IP Code) IEC 62271-1:2007, High-voltage switchgear and controlgear Part 1: Common specifications IEC 62271-203:2011, High-voltage switchgear and controlgear Part 20
48、3:Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV2IEC 62271-303, High-voltage switchgear and controlgear Part 303:Use and handling of sulphur hexafluoride (SF6) ISO/IEC Guide 51, Safety aspects Guidelines for their inclusion in standards 2 Normal and special service conditions
49、 Clause 2 of IEC 62271-1 is applicable with the following addition: At any altitude the dielectric characteristics of the internal insulation are identical with those measured at sea-level. For this insulation, therefore, no requirements concerning the altitude are applicable. The normal service conditions which apply to a GIL depending on the installation conditions are given in 2.101, 2.102 and 2.103. When more than one of these installation conditions apply, the relevant subcla
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1