EN 62282-4-101-2014 en Fuel cell technologies - Part 4-101 Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically .pdf

1、BSI Standards PublicationFuel cell technologiesPart 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) Safety of electrically powered industrial trucksBS EN 62282-4-101:2014National forewordThis British Standard is the UK implementation of EN 62282

2、-4-101:2014. Itis identical to IEC 62282-4-101:2014.The UK participation in its preparation was entrusted to TechnicalCommittee GEL/105, Fuel cell technologies.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to includ

3、e all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 81618 5ICS 27.070Compliance with a British Standard cannot confer immunity fromlegal obligations.This British S

4、tandard was published under the authority of theStandards Policy and Strategy Committee on 31 October 2014.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62282-4-101:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62282-4-101 October 2014 ICS 27.070 En

5、glish Version Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks (IEC 62282-4-101:2014) Technologies des piles combustible - Partie 4-101: Systmes piles combustible po

6、ur la propulsion, autres que les vhicules routiers et groupes auxiliaires de puissance (GAP) - Scurit pour chariots de manutention lectriques (CEI 62282-4-101:2014) Brennstoffzellen-Technologien - Teil 4-101: Antriebe mit Brennstoffzellen-Energiesystemen (mit Ausnahme von Straenfahrzeugen und Hilfsa

7、ntrieben) - Elektrisch betriebene Flurfrderfahrzeuge - Sicherheit (IEC 62282-4-101:2014) This European Standard was approved by CENELEC on 2014-09-16. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the st

8、atus of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, Fren

9、ch, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria,

10、 Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, S

11、weden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CENELEC All rights of expl

12、oitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62282-4-101:2014 E BS EN 62282-4-101:2014EN 62282-4-101:2014 - 2 - Foreword The text of document 105/506/FDIS, future edition 1 of IEC 6228-4-101, prepared by IEC/TC 105 “Fuel cell technologies“ was submitted t

13、o the IEC-CENELEC parallel vote and approved by CENELEC as EN 62282-4-101:2014. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2015-06-16 latest date by which the nation

14、al standards conflicting with the document have to be withdrawn (dow) 2017-09-16 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endor

15、sement notice The text of the International Standard IEC 62282-4-101:2014 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60034 Series NOTE Harmonised as EN 60034

16、 Series. IEC 60034-11 NOTE Harmonised as EN 60034-11. IEC 60079-20-1 NOTE Harmonised as EN 60079-20-1. IEC 60112 NOTE Harmonised as EN 60112. IEC 60243 Series NOTE Harmonised as EN 60243 Series. IEC 60695-11-5 NOTE Harmonised as EN 60695-11-5. IEC 60812 NOTE Harmonised as EN 60812. IEC 62282-3-100 N

17、OTE Harmonised as EN 62282-3-100. IEC 62282-5-1 NOTE Harmonised as EN 62282-5-1. ISO 16017-1 NOTE Harmonised as EN ISO 16017-1. BS EN 62282-4-101:2014- 3 - EN62282-4-101:2014 Annex ZA (normative) Normative references to international publications with their corresponding European publications The fo

18、llowing documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When a

19、n International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60079-0

20、- Explosive atmospheres Part 0: Equipment - General requirements EN 60079-0 - IEC 60079-10-1 - Explosive atmospheres Part 10-1: Classification of areas - Explosive gas atmospheres EN 60079-10-1 - IEC 60079-29-1 - Explosive atmospheres Part 29-1: Gas detectors - Performance requirements of detectors

21、for flammable gases EN 60079-29-1 - IEC 60079-29-4 - Explosive atmospheres Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases EN 60079-29-4 - IEC 60204-1 - Safety of machinery - Electrical equipment of machines Part 1: General requirements EN 60204-1 - IEC

22、 60227-3 - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 3: Non-sheathed cables for fixed wiring HD 21.3 S31)- IEC 60227-5 - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 5: Flexible cables (cords) - - IEC 60335-2-

23、41 - Household and similar electrical appliances Safety Part 2-41: Particular requirements for pumps EN 60335-2-41 - IEC 60335-2-80 - Safety of household and similar electrical appliances Part 2-80: Particular requirements for fans EN 60335-2-80 - IEC 60364-4-41 (mod) 2005 Low-voltage electrical ins

24、tallations Part 4-41: Protection for safety - Protection against electric shock HD 60364-4-41 + corr. July 2007 2007 IEC 60529 - Degrees of protection provided by enclosures (IP Code) EN 60529 - 1) Superseded by EN 50525-2-31:2011. BS EN 62282-4-101:2014EN 62282-4-101:2014 - 4 - Publication Year Tit

25、le EN/HD Year IEC 60584-1 - Thermocouples Part 1: Reference tables EN 60584-1 - IEC 60664-1 - Insulation coordination for equipment within low-voltage systems Part 1: Principles, requirements and tests EN 60664-1 - IEC 60695 Series Fire hazard testing EN 60695 Series IEC 60695-1-30 - Fire hazard tes

26、ting Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines EN 60695-1-30 - IEC 60695-10-2 - Fire hazard testing Part 10-2: Guidance and test methods for the minimization of the effects of abnormal heat on electrotechnical p

27、roducts involved in fires - Method for testing products made from non-metallic materials for resistance to heat using the ball pressure test EN 60695-10-2 - IEC 60695-11-4 - Fire hazard testing Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method EN 60695-11-4 - IEC 60695-1

28、1-10 - Fire hazard testing Part 11-10: Test flames - 50 W horizontal and vertical flame test methods EN 60695-11-10 - IEC 60730-1 (mod) 2013 Automatic electrical controls Part 1: General requirements EN 60730-12)- IEC 60730-2-17 - Automatic electrical controls for household and similar use Part 2-17

29、: Particular requirements for electrically operated gas valves, including mechanical requirements - - IEC 60947-3 - Low-voltage switchgear and controlgear Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units EN 60947-3 - IEC 60947-5-1 - Low-voltage switchgear and controlg

30、ear Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices EN 60947-5-1 - IEC 60950-1 (mod) 2005 Information technology equipment - Safety Part 1: General requirements EN 60950-1+ corr. October 2006 2011 IEC 61204-7 - Low-voltage power supplies, d.c. out

31、put Part 7: Safety requirements EN 61204-7 - 2)At draft stage. BS EN 62282-4-101:2014- 5 - EN62282-4-101:2014 Publication Year Title EN/HD Year IEC/TS 61430 - Secondary cells and batteries - Test methods for checking the performance of devices designed for reducing explosion hazards - Lead-acid star

32、ter batteries - - IEC 61558-1 - Safety of power transformers, power supplies, reactors and similar products Part 1: General requirements and tests EN 61558-1 - IEC 62103 - Electronic equipment for use in power installations - - IEC 62133 - Secondary cells and batteries containing alkaline or other n

33、on-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications EN 62133 - IEC 62282-2 - Fuel cell technologies Part 2: Fuel cell modules EN 62282-2 - ISO 179 Series Plastics - Determination of Charpy impact propertie

34、s Part 1: Non-instrumented impact test EN ISO 179 Series ISO 180 - Plastics - Determination of Izod impact strength EN ISO 180 - ISO 877 Series Plastics - Methods of exposure to solar radiation Part 1: General guidance EN ISO 877 Series ISO 1419 - Rubber- or plastics-coated fabrics - Accelerated-age

35、ing tests - - ISO 1421 - Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break EN ISO 1421 - ISO 1798 - Flexible cellular polymeric materials - Determination of tensile strength and elongation at break EN ISO 1798 - ISO 2440 - Flexible and rigid cellular poly

36、meric materials - Accelerated ageing tests EN ISO 2440 - ISO 2626 - Copper - Hydrogen embrittlement test EN ISO 2626 - ISO 3691-1 - Industrial trucks - Safety requirements and verification Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrie

37、r trucks EN ISO 3691-1 - ISO/TS 3691-7 - Industrial trucks - Safety requirements and verification Part 7: Regional requirements for countries within the European Community - - ISO/TS 3691-8 - Industrial trucks - Safety requirements and verification Part 8: Regional requirements for countries outside

38、 the European Community - - BS EN 62282-4-101:2014EN 62282-4-101:2014 - 6 - Publication Year Title EN/HD Year ISO 3864-1 - Graphical symbols - Safety colours and safety signs Part 1: Design principles for safety signs and safety markings - - ISO 3996 - Road vehicles - Brake hose assemblies for hydra

39、ulic braking systems used with non-petroleum-base brake fluid - - ISO 4038 - Road vehicles - Hydraulic braking systems - Simple flare pipes, tapped holes, male fittings and hose end fittings - - ISO 4080 - Rubber and plastics hoses and hose assemblies - Determination of permeability to gas EN ISO 40

40、80 - ISO 4675 - Rubber- or plastics-coated fabrics; low-temperature bend test - - ISO 7010 - Graphical symbols - Safety colours and safety signs - Safety signs used in workplaces and public areas - - ISO 7866 2012 Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, constructi

41、on and testing EN ISO 7866 2012 ISO 9809-1 - Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1100 MPa EN ISO 9809-1 - ISO 10380 - Pipework - Corrugated metal hoses and hose assemb

42、lies EN ISO 10380 - ISO 10442 - Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors EN ISO 10442 - ISO 10806 - Pipework - Fittings for corrugated metal hoses EN ISO 10806 - ISO 11114-4 - Transportable gas cylinders - Compatibility of cylinder and

43、valve materials with gas contents Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement EN ISO 11114-4 - ISO 13226 - Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers - - ISO 13849-1 - Safety of machinery

44、- Safety-related parts of control systems Part 1: General principles for design EN ISO 13849-1 - ISO 14113 - Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) EN ISO 14113 - BS EN 62282-4-101:2014- 7 - EN62282-4-101:2014 Publica

45、tion Year Title EN/HD Year ISO/TS 14687-2 - Hydrogen fuel - Product specification Part 2: Proton exchange membrane (PEM) fuel cell applications for road vehicles - - ISO 15500-12 - Road vehicles - Compressed natural gas (CNG) fuel system components Part 12: Pressure relief valve (PRV) - - ISO 15649

46、- Petroleum and natural gas industries - Piping - - ISO/TS 15869 2009 Gaseous hydrogen and hydrogen blends - Land vehicle fuel tanks - - ISO/TR 15916 - Basic considerations for the safety of hydrogen systems - - ISO 16010 - Elastomeric seals - Material requirements for seals used in pipes and fittin

47、gs carrying gaseous fuels and hydrocarbon fluids - - ISO 16111 2008 Transportable gas storage devices - Hydrogen absorbed in reversible metal hydride - - ISO 17268 - Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids - - ISO 2

48、1927-3 - Smoke and heat control systems Part 3: Specification for powered smoke and heat exhaust ventilators - - ISO 23551-1 - Safety and control devices for gas burners and gas-burning appliances - Particular requirements Part 1: Automatic valves - - BS EN 62282-4-101:2014 2 IEC 62282-4-101:2014 IE

49、C 2014 CONTENTS INTRODUCTION . 7 1 Scope 8 2 Normative references 9 3 Terms and definitions 12 4 Construction requirements for safety . 16 4.1 General . 16 4.2 Hydrogen and other fluid containing parts . 17 General . 17 4.2.1Piping, hoses, tubing and fittings . 17 4.2.2Hydrogen pressure vessels 18 4.2.3Metal hydride container . 19 4.2.4Methanol fuel tank . 19 4.2.54.3 Over-pressure and thermal protection . 20 4.4 Regulators 22 4.5 Oper