EN 62282-5-1-2012 en Fuel cell technologies - Part 5-1 Portable fuel cell power systems - Safety.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationFuel cell technologiesPart 5-1: Portable fuel cell power systems SafetyBS EN 62282-5-1:2012National forewordThis British Standard is the UK implementation of EN 62282-5-1:2012. I

2、t is identical to IEC 62282-5-1:2012. It supersedes BS EN 62282-5-1:2007,which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee GEL/105, Fuel cell technologies.A list of organizations represented on this committee can be obtained on request to its secretary.T

3、his publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2013.Published by BSI Standards Limited 2013.ISBN 978 0 580 60957 2 ICS 27.070 Compliance with a British Standard cannot confer

4、 immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2013.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 62282-5-1:2012EUROPEAN STANDARD EN 62282-5-1 NORME EUROPENNE

5、EUROPISCHE NORM November 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2012 CENELEC - All rights of exploitation in any form

6、and by any means reserved worldwide for CENELEC members. Ref. No. EN 62282-5-1:2012 E ICS 27.070 Supersedes EN 62282-5-1:2007English version Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety (IEC 62282-5-1:2012) Technologies des piles combustible - Partie 5-1: Systmes pile

7、s combustible portables - Scurit (CEI 62282-5-1:2012) Brennstoffzellentechnologien - Teil 5-1: Portable Brennstoffzellen-Energiesysteme - Sicherheit (IEC 62282-5-1:2012) This European Standard was approved by CENELEC on 2012-10-23. CENELEC members are bound to comply with the CEN/CENELEC Internal Re

8、gulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELE

9、C member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official v

10、ersions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,

11、 the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 62282-5-1:2012EN 62282-5-1:2012 Foreword The text of document 105/396/FDIS, future edition 2 of IEC 62282-5-1, prepared by IEC/TC 105 “Fuel cell technologies“ was

12、 submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62282-5-1:2012. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-07-23 latest date by which

13、the national standards conflicting with the document have to be withdrawn (dow) 2015-10-23 This document supersedes EN 62282-5-1:2007. EN 62282-5-1:2012 includes the following significant technical changes with respect to EN 62282-5-1:2007: normative references and definitions have been updated (e.g

14、., hazardous locations, micro fuel cell power systems, transportable equipment, etc.); subclause 4.2.2 has been updated referencing an alternative test method in response to a comment; the limit on flammable atmospheres has been reduced from 50 % of LFL to 25 % of LFL in 4.5.4 and in 7.20; subclause

15、 4.14 and the corresponding tests in 7.22 have been updated to include more effluents and criteria to establish if a system is suitable for indoor or outdoor operation; specific criteria for oxygen detector sensor performance requirements have been revised in 7.21; subclause 7.18 has been updated wi

16、th a new test method and new drop heights in response to comments; Table 1 has been added giving limits on emission of effluents using limits drawn from the micro fuel cell power system standard. Attention is drawn to the possibility that some of the elements of this document may be the subject of p

17、atent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). BS EN 62282-5-1:2012EN 62282-

18、5-1:2012 Endorsement notice The text of the International Standard IEC 62282-5-1:2012 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60439-1 NOTE Harmonized as E

19、N 60439-1. IEC 62282-6-100 NOTE Harmonized as EN 62282-6-100. ISO 15156-1 NOTE Harmonized as EN ISO 15156-1. BS EN 62282-5-1:2012EN 62282-5-1:2012 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole

20、or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication ha

21、s been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60034 Series Rotating electrical machines EN 60034 Series IEC 60068-2-75 - Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests EN 60068-2-75 - IEC 60079-0 - Exp

22、losive atmospheres - Part 0: Equipment - General requirements EN 60079-0 - IEC 60079-2 - Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure “p“ EN 60079-2 - IEC 60079-10 - Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas EN 60

23、079-10- IEC 60079-15 - Explosive atmospheres - Part 15: Equipment protection by type of protection “n“ EN 60079-15 - IEC 60079-20-1 - Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and dataEN 60079-20-1 - IEC 60079-29-1 - Explosive atmosp

24、heres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases EN 60079-29-1 - IEC 60086-4 - Primary batteries - Part 4: Safety of lithium batteries EN 60086-4 - IEC 60204-1 (mod) 2005 Safety of machinery - Electrical equipment of machines - Part 1: General requirements

25、 EN 60204-1 + corr. February 2006 2010 IEC 60216-4-1 - Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens EN 60216-4-1 - IEC 60335-1 (mod) + corr. July + corr. April 2010 2010 2011 Household and similar electrical appliances - Safety - Part

26、 1: General requirements EN 60335-1 2012 IEC 60364-4-41 - Low-voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock HD 60364-4-41 - IEC 60529 - Degrees of protection provided by enclosures (IP Code) - - BS EN 62282-5-1:2012EN 62282-5-1:2012 Publicati

27、on Year Title EN/HD Year IEC 60664-1 - Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests EN 60664-1 - IEC 60695-2-11 - Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-product

28、s EN 60695-2-11 - IEC 60695-2-13 - Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials EN 60695-2-13 - IEC 60695-11-5 - Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory

29、 test arrangement and guidance EN 60695-11-5 - IEC 60695-11-10 - Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods EN 60695-11-10 - IEC 60695-11-20 - Fire hazard testing - Part 11-20: Test flames - 500 W flame test methods EN 60695-11-20 - IEC 60730-1 (m

30、od) 2010 Automatic electrical controls for household and similar use - Part 1: General requirements EN 60730-1 2011 IEC 60730-2-5- - Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems EN 60730-2-5 - IEC 6073

31、0-2-17 - Automatic electrical controls for household and similar use - Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements - - IEC 60812 - Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) EN 608

32、12 - IEC 60884-1 - Plugs and socket-outlets for household and similar purposes - Part 1: General requirements - - IEC 60934 - Circuit-breakers for equipment (CBE) EN 60934 - IEC 60950-1 (mod) + corr. August 2005 2006 Information technology equipment - Safety - Part 1: General requirements EN 60950-1

33、 + A11 + A12 + AC 2006 2009 2011 2011 IEC 60990 1999 Methods of measurement of touch current and protective conductor current EN 60990 1999 IEC 61000-3-2 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current 16 A per phase) EN 61000

34、-3-2 - BS EN 62282-5-1:2012EN 62282-5-1:2012 Publication Year Title EN/HD Year IEC 61000-3-3 - Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current 16 A per phas

35、e and not subject to conditional connection EN 61000-3-3 - IEC 61000-6-1 - Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments EN 61000-6-1 - IEC 61000-6-2 - Electromagnetic compatibility (EMC) - Part 6-2: Generic

36、 standards - Immunity for industrial environments EN 61000-6-2 - IEC 61000-6-3 - Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments EN 61000-6-3 - IEC 61000-6-4 - Electromagnetic compatibility (EMC) - Pa

37、rt 6-4: Generic standards - Emission standard for industrial environments EN 61000-6-4 - IEC 61025 - Fault Tree Analysis (FTA) EN 61025 - IEC 61032 - Protection of persons and equipment by enclosures - Probes for verification EN 61032 - IEC 61140 - Protection against electric shock - Common aspects

38、for installation and equipment EN 61140 - IEC 61439-1 - Low-voltage switchgear and controlgear assemblies - Part 1: General rules EN 61439-1 - IEC 61508-1 - Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements EN 61508-1 - IEC 61511

39、-1 - Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and software requirements EN 61511-1 - IEC 61511-3 - Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the dete

40、rmination of the required safety integrity levels EN 61511-3 - IEC 61882 - Hazard and operability studies (HAZOP studies) - Application guide - - IEC 62040-1 - Uninterruptible Power Systems (UPS) - Part 1: General and safety requirements for UPS EN 62040-1 - IEC 62040-2 - Uninterruptible power syste

41、ms (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements EN 62040-2 - IEC 62133 - Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications

42、EN 62133 - BS EN 62282-5-1:2012EN 62282-5-1:2012 Publication Year Title EN/HD Year IEC 62282-2 - Fuel cell technologies - Part 2: Fuel cell modules EN 62282-2 - ISO 3864 Series Graphical symbols - Safety colours and safety signs - - ISO 4080 - Rubber and plastics hoses and hose assemblies - Determin

43、ation of permeability to gas EN ISO 4080 - ISO 7000 - Graphical symbols for use on equipment - Index and synopsis - - ISO 7010 - Graphical symbols - Safety colours and safety signs - Registered safety signs EN ISO 7010 - ISO 15649 - Petroleum and natural gas industries - Piping - - ISO 16000-3 - Ind

44、oor air - Part 3: Determination of formaldehyde and other carbonyl compounds - Active sampling method - - ISO 16000-6 - Indoor air - Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography us

45、ing MS/FID - - ISO 16017-1 2000 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling EN ISO 16017-1 2000 ISO 16110-1 2007 Hydrogen generators using fuel processing technologie

46、s - Part 1: Safety - - ISO 16111 - Transportable gas storage devices - Hydrogen absorbed in reversible metal hydride - - ISO 16528 - Boilers and pressure vessels - Registration of Codes and Standards to promote international recognition - - BS EN 62282-5-1:201262282-5-1 IEC:2012(E) CONTENTS 1 Scope

47、. . 6 2 Normative references . 8 3 Terms and definitions . 11 4 Design and construction requirements . 16 4.1 Physical environment and operating conditions . 16 4.2 Material compatibility 16 4.3 Protection against mechanical hazards 17 4.4 Protection against toxicity of fuels and fuel feedstocks . .

48、 18 4.5 Protection against explosion hazards 18 4.6 Protection against electric shock 19 4.7 Selection of electrical components and equipment . 21 4.8 Protection against fire hazard . 24 4.9 Protection against temperature hazards . 26 4.10 Protection against electromagnetic disturbances . 26 4.11 Ha

49、zard and risk assessment 27 4.12 Safety control circuits . 27 4.13 Protection against oxygen depletion . . 27 4.14 Emission of effluents 28 4.15 Fuel supply . 28 4.16 Fuel processing systems . 29 4.17 Enclosures . 29 4.18 Battery supplies. 29 4.19 Pressure vessels and piping 30 4.20 Hoses 31 4.21 Automatic shut-off valves . . 31 4.22 Regulators 31 4.23 Process control equipment 32 4.24 Filters 32 4.25 Motors . 32 4.26 Fuel pumps 32 5 Instructions . 32 5.1 Operation and maintenance manual 32 5.2 Users information manual . 34 6 Labelling .