EN 62300-2005 en Consumer audio video equipment digital interface with plastic optical fibre《带塑料光纤的用户音频 视频设备数字接口 IEC 62300 2004》.pdf

1、BRITISH STANDARD BS EN 62300:2005 Consumer audio/video equipment digital interface with plastic optical fibre The European Standard EN 62300:2005 has the status of a British Standard ICS 33.160.99; 33.180.20 BS EN 62300:2005 This British Standard was published under the authority of the Standards Po

2、licy and Strategy Committee on 16 March 2005 BSI 16 March 2005 ISBN 0 580 45595 5 National foreword This British Standard is the official English language version of EN 62300:2005. It is identical with IEC 62300:2004. The UK participation in its preparation was entrusted to Technical Committee EPL/1

3、00, Audio, video and multimedia systems and equipment, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this

4、 document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a cont

5、ract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals f

6、or change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 13 and a back cover. The BSI copyright notice displayed i

7、n this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 62300 NORME EUROPENNE EUROPISCHE NORM January 2005 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechniq

8、ue Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62300:2005 E ICS 33.160.99; 33.180.20 English version Consumer aud

9、io/video equipment digital interface with plastic optical fibre (IEC 62300:2004) Interface numrique avec une fibre optique plastique pour quipements audio/vido grand public (CEI 62300:2004) Audio-/Video-Gerte fr den Allgemeingebrauch Digitale Schnittstelle mit Kunststoff- Lichtleitfaser (IEC 62300:2

10、004) This European Standard was approved by CENELEC on 2004-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliograph

11、ical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a

12、 CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

13、Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Foreword The text of document 100/840/FDIS, future edition 1 of IEC 62300, prepared by IEC TC 100, Audio, video and multimedia systems and e

14、quipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62300 on 2004-12-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2005-09-01 late

15、st date by which the national standards conflicting with the EN have to be withdrawn (dow) 2007-12-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62300:2004 was approved by CENELEC as a European Standard without any modification. _ Page2 EN6230

16、0:2005CONTENTS 1 Scope.4 2 Normative references .4 3 Terms, definitions and abbreviations 4 3.1 Terms and definitions 4 3.2 Abbreviations 4 4 System consideration .5 4.1 Area of application 5 4.2 Operating environment 5 5 Configuration of digital interface and characteristics to be specified 5 5.1 C

17、onfiguration of digital interface5 5.2 Characteristics of electrical interface.5 5.3 Characteristics of optical interface.6 6 Safety aspects6 Annex A (normative) Wide-band POF 7 A.1 Introduction .7 A.2 Physical dimension7 A.3 Characteristics 7 Annex B (normative) Optical connector 8 B.1 Introduction

18、 .8 B.2 Physical dimension8 B.3 Characteristics 9 Annex C (informative) Interface applications10 C.1 Principal features 10 C.2 Connection between D-VCR and TV10 C.3 Connection between a CD player and an audio amplifier .11 Annex ZA (normative) Normative references to international publications with

19、their corresponding European Publications 12 Bibliography13 Page3 EN62300:2005 CONSUMER AUDIO/VIDEO EQUIPMENT DIGITAL INTERFACE WITH PLASTIC OPTICAL FIBRE 1 Scope This International Standard specifies the principal electrical and optical parameters for a consumer audio/video equipment digital interf

20、ace that uses plastic optical fibre (POF). NOTE A description of the principal features of such an interface is given in Annex C. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. Fo

21、r undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60050-731, International Electrotechnical Vocabulary (IEV) Chapter 731: Optical fibre communication IEC 60793-2-40, Optical fibres Part 2-40: Product specifications Sectional specification for

22、 category A4 multimode fibres IEC 60825-1, Safety of laser products Part 1: Equipment classification, requirements and users guide IEC 60825-2, Safety of laser products Part 2: Safety of optical fibre communication systems IEC 61754-21, Fibre optic connector interfaces Part 21: Type SMI connector fa

23、mily for plastic optical fibre 13 Terms, definitions and abbreviations 3.1 Terms and definitions For the purposes of this document, the terms and definitions contained in IEC 60050-731 apply. 3.2 Abbreviations BER Bit error rate D-VCR Digital video cassette recorder E/O Electrical to optical HDTV Hi

24、gh definition television O/E Optical to electrical PECL Positive shifted emitter coupled logic PMD Physical media dependent POF Plastic optical fibre RMS Root mean square 1To be published. Page4 EN62300:2005Rx Receiver SFF Small form factor STB Set top box Tx Transmitter 4 System consideration 4.1 A

25、rea of application This digital interface covers audio and/or video and accompanied data systems for consumer audio/video equipment and multimedia systems in bi-direction, mainly used for audio equipment, TV-set, D-VCR, etc. 4.2 Operating environment The environmental conditions for the digital inte

26、rface are mainly defined in other standards for the individual units. Where no range is given, the interface shall operate at least within the temperature range 0 C to 50 C and in a relative humidity range of 25 % to 75 %. 5 Configuration of digital interface and characteristics to be specified 5.1

27、Configuration of digital interface The basic configuration of this digital interface is shown in Figure 1. The reference points 1 and 4 apply to the electrical input and output of the electro-optical and opto-electrical converter respectively. The optical matching values specified in this standard a

28、pply at the reference points 2 and 3. The overall characteristics of a POF are specified in Annex A for a wide-band POF and in Annex B for the optical connectors. NOTE Some applications based on this digital interface are illustrated in Annex C. 4 POF Tx/Rx (E/O) (O/E) Rx/Tx (O/E) (E/O) Digital equi

29、pment 1 Digital equipment 2 3 2 1 IEC 1464/04 Figure 1 Basic digital interface 5.2 Characteristics of electrical interface The characteristics of electrical interface at the reference points 1 and 4 shown in Figure 1 shall be as specified in Table 1. Table 1 Electrical interface Parameter Units Maxi

30、mum bit rate 500 Mbit/s Amplitude deviation from 800 mV 250 mV Level PECL Type of signal Differential Page5 EN62300:20055.3 Characteristics of optical interface The characteristics of optical interface at the reference points 2 and 3 shown in Figure 1 shall be as specified in Figure 2 and Table 2. 0

31、 22 37,5 62,5 78 100 130 100 80 50 20 0 20 Normalized time (unit interval) Normalized amplitude % IEC 1465/04Figure 2 Eye pattern mask at transmitter Table 2 Optical interface Parameter Units Tx & Rx Maximum bit rate 500 Mbit/s Link length 1 to 50 m Transmitter characteristics Wavelength deviation f

32、rom 650 nm 10 nm Mean launched power from 1 m POF 6 to 2 dBm Maximum RMS spectral width 20 nm Minimum extinction ratio 10 dB Receiver characteristics Overload (BER 10 -12 ) 2 dBm Sensitivity (BER 10 -12 ) 19 dBm Rise/fall time (max.) (10-90 %) 1 ns NOTE The ambient temperature is taken to be 25 C. 6

33、 Safety aspects The transmitter shall be so designed as to prevent harmful effects to persons. Compliance shall be checked in accordance with IEC 60825-1 and IEC 60825-2. Page6 EN62300:2005Annex A (normative) Wide-band POF A.1 Introduction A wide-band POF introduces a high-speed digital interface be

34、tween consumer audio/video equipment. A.2 Physical dimension The cladding diameter is 750 m and plastic jacket diameter is 2,2 mm. Specification details are in accordance with IEC 60793-2-40. A.3 Characteristics Transmission loss is less than 0,18 dB/m at 640 nm or 660 nm. Bending loss is less than

35、0,5 dB/turn of 25 mm radius. Details of characteristics are in accordance with IEC 60793-2-40. Page7 EN62300:2005Annex B (normative) Optical connector B.1 Introduction An optical connector is about half the size of the conventional PN connector, whose size is suitable to SFF size. B.2 Physical dimen

36、sion The principal physical characterisics of the plug and receptacle of the optical connector are shown in Figures B.1 and B.2, and in Figures B.3 and B.4, respectively. Specification details are in accordance with IEC 61754-21. Figure B.1 Optical connector (plug) (30) (11,4) (7,85) (5) IEC 1467/04

37、 Figure B.2 Optical connector (plug) IEC 1466/04 Page8 EN62300:2005 Figure B.3 Optical connector (receptacle) (13,5) (5) (10,9) IEC 1469/04 Figure B.4 Optical connector (receptacle) B.3 Characteristics Details of characteristics are in accordance with IEC 61754-21. IEC 1468/04 Page9 EN62300:2005Anne

38、x C (informative) Interface applications C.1 Principal features The digital interface specified in this standard uses wide-band POF that includes both the multi-layer type and the graded index type. These features provide an optical signal speed of up to 500 Mbit/s and a single hop distance of up to

39、 50 m. By using this interface, the high- speed digital signals which include audio/video signal and multimedia data are transmitted simultaneously. It is further possible to realize consumer audio/video equipment platform and/or multimedia system with low cost and high performance. This digital int

40、erface has five features that are important in consumer audio/video equipment. It is possible to transmit the high speed digital signal without introducing any electromagnetic interference. This interface overcomes the transmission limitation of an electrical interface. The optical connector of the

41、interface is so small that it is convenient to mount in consumer audio/video equipment, such as D-VCR, STB, HDTV, and so on. Wide-band POF and an optical transceiver of the interface operate up to 500 Mbit/s and the single hop distance is up to 50 m. This feature applies to such as IEEE P1394b/S400.

42、 This interface has upward compatibility for an industrial optical interface based on POF. Typical applications are discussed in Clauses C.2 and C.3. C.2 Connection between D-VCR and TV The basic connection between D-VCR and TV using the interface is shown in Figure C.1. In this application, the req

43、uest control signal is transmitted from TV to D-VCR and the digital video stream is transmitted from D-VCR to TV through POF. 4 POF Tx/Rx (E/O) (O/E) Rx/Tx (O/E) (E/O) D-VCR TV 3 2 1 IEC 1470/04Figure C.1 Connection between D-VCR and TV using the interface Page10 EN62300:2005C.3 Connection between a

44、 CD player and an audio amplifier The basic connection between CD player and audio amplifier using the interface is shown in Figure C.2. In this application, the request control signal is transmitted from an audio amplifier to a CD player and the digital audio stream is transmitted from the CD playe

45、r to the audio amplifier through POF. After that, the audio signal is regenerated by a speaker. 4 POF Tx/Rx (E/O) (O/E) Rx/Tx (O/E) (E/O) CD player Audio amplifier 3 2 1 IEC 1471/04Figure C.2 Connection between a CD player and an audio amplifier using the interface Page11 EN62300:2005 Annex ZA (norm

46、ative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the

47、referenced document (including any amendments) applies. NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60050-731 - 1)International Electrotechnical Vocabulary (IEV) Chapter 731:

48、Optical fibre communication- - IEC 60793-2-40 - 1)Optical fibres Part 2-40: Product specifications - Sectional specification for category A4 multimode fibres EN 60793-2-40 2002 2)IEC 60825-1 - 1)Safety of laser products Part 1: Equipment classification, requirements and users guide EN 60825-1 1994 2

49、)IEC 60825-2 - 1)Part 2: Safety of optical fibre communication systems (OFCS) EN 60825-2 2004 2)IEC 61754-21 - 3)Fibre optic connector interfaces Part 21: Type SMI connector family for plastic optical fibre - - 1)Undated reference. 2)Valid edition at date of issue. 3)To be published. Page12 EN62300:2005Bibliography IEEE P1394b: High Performance Serial Bus (Supplement) IEEE 1394-1995: