EN 62319-1-1-2005 en Polymeric thermistors - Directly heated positive step function temperature coefficient Part 1-1 Blank detail specification - Current limiting application《聚合热敏电.pdf

1、BRITISH STANDARDBS EN 62319-1-1:2005Polymeric thermistors Directly heated positive step function temperature coefficient Part 1-1: Blank detail specification Current limiting applicationThe European Standard EN 62319-1-1:2005 has the status of a British StandardICS 31.040.30g49g50g3g38g50g51g60g44g4

2、9g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 62319-1-1:2005This British Standard was published under the authority of the Standards Policy and Strategy Committee on

3、 30 June 2006 BSI 2006ISBN 0 580 48725 3National forewordThis British Standard is the official English language version of EN 62319-1-1:2005. It is identical with IEC 62319-1-1:2005.The UK participation in its preparation was entrusted to Technical Committee EPL/40X, Capacitors and resistors for ele

4、ctronic equipment, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Cata

5、logue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its cor

6、rect application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests inform

7、ed; monitor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 12, an inside back cover and a back cover.The BSI copyright notice displayed in this document indicate

8、s when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARD EN 62319-1-1 NORME EUROPENNE EUROPISCHE NORM March 2005 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee f

9、r Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62319-1-1:2005 E ICS 31.040.30 English version Polymeric thermistors - Directly heated pos

10、itive step function temperature coefficient Part 1-1: Blank detail specification - Current limiting application (IEC 62319-1-1:2005) Thermistances polymres - Coefficient de temprature positif de fonction chelon chauffage direct Partie 1-1: Spcification particulire cadre - Application de limitation d

11、e courant (CEI 62319-1-1:2005) Temperaturabhngige Widerstnde aus Polymerwerkstoffen - Direkt geheizte temperaturabhngige Widerstnde mit positivem Temperaturkoeffizienten Teil 1-1: Vordruck fr die Bauartspezifikation - Anwendung fr die Strombegrenzung (IEC 62319-1-1:2005) This European Standard was a

12、pproved by CENELEC on 2005-02-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such n

13、ational standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own lang

14、uage and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania

15、, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. 2 Foreword The text of document 40/1506/FDIS, future edition 1 of IEC 62319-1-1, prepared by IEC TC 40, Capacitors and resistors for electronic equipment, was submitted to t

16、he IEC-CENELEC parallel vote and was approved by CENELEC as EN 62319-1-1 on 2005-02-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2005-12-01 latest date by which the nat

17、ional standards conflicting with the EN have to be withdrawn (dow) 2008-02-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62319-1-1:2005 was approved by CENELEC as a European Standard without any modification. _ EN 62319-1-1:2005 3 POLYMERIC TH

18、ERMISTORS DIRECTLY HEATED POSITIVE STEP FUNCTION TEMPERATURE COEFFICIENT Part 1-1: Blank detail specification Current limiting application INTRODUCTION Blank detail specification A blank detail specification is a supplementary document to the generic specification and contains requirements for style

19、 and layout and minimum content of detail specifications. Detail specifications not complying with these requirements shall not be considered as being in accordance with IEC specifications nor shall they so be described. In the preparation of detail specifications, the content of 4.1 of the generic

20、specification shall be taken into account. The numbers between brackets on the first page correspond to the following information which shall be inserted in the position indicated. Identification of the detail specification 1 The “International Electrotechnical Commission” or the National Organisati

21、on under whose authority the detail specification is drafted. 2 The IEC or National Standards number of the detail specification, date of issue and any other information required by the national system. 3 The number and issue number of the IEC or national generic specification. 4 The IEC number of t

22、he blank detail specification. Identification of the thermistor 5 A short description of the type of thermistor. 6 Information on typical construction (if applicable). NOTE When the thermistor is not designed for use on printed boards, this should be stated in the detail specification in this positi

23、on. 7 Outline drawing with main dimensions which are important for the interchangeability and/or reference to the national or international documents for outlines. Alternatively, this drawing may be given in the annex to the detail specification. 8 Application or group of applications covered and/or

24、 assessment level. 9 Reference data on the most important properties, to allow comparison between the various thermistor types. EN 62319-1-1:2005 4 Information on the availability of components qualified tothis detail specification is given in IEC QC 001005. 1 IEC 62319-1-1-XXX 2 QC XXXXXX-XXX IEC 6

25、2319-1-1 4 QC XXXXXX ELECTRONIC COMPONENTS OF ASSESSED QUALITY IN ACCORDANCE WITH: 3 POLYMERIC POSITIVE TEMPERATURE COEFFICIENT 5 THERMISTORS FOR CURRENT LIMITING APPLICATION 6 Outline drawing: (see Table 1) ( angle projection) 7 (Other shapes are permitted within the dimensions given) Assessment le

26、vel(s): EZ 8 NOTE For 1 to 9 see preceding page. 9 1 General data 1.1 Method(s) of mounting (to be inserted) See 4.9 of IEC 62319-1. 1.2 Dimensions All dimensions are in millimetres or inches and millimetres; it shall be stated which dimensions are suitable for gauging. Dimensional drawing(s) shall

27、be given in the detail specification. If necessary, the dimensions may be listed in tabular form with reference to styles or codes. 1.3 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies

28、. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60068, Environmental testing IEC 60410, Sampling plans and procedures for inspection by attributes IEC 62319-1; Polymeric thermistors Driectly heated positive step function temperature coe

29、fficient Part 1: Generic specification 1_ 1To be published. EN 62319-1-1:2005 5 1.4 Coating The detail specification shall state (if applicable): a) whether the coating is insulating or non-insulating; b) the material; c) the colour, if applicable. 1.5 Terminations The detail specification shall sta

30、te whether the terminations are suitable for soldering. If they are not, suitable methods of connection shall be stated for example: welding, clamping or crimping. 1.6 Flammability The detail specification shall state whether the thermistor is actively or passively flammable, if applicable. 1.7 Resi

31、stance to solvents The detail specification shall state whether the coating and the marking of the thermistor are solvent resistant, if applicable. 1.8 Packaging The detail specification shall give the following information (if required): a) whether bulk packed or taped and if taped, drawing or refe

32、rences; b) the dimensions of the immediate packaging and the number of thermistors packed; c) the dimensions of the outer package and the number of immediate packages; d) methods of disposal of the packaging material. 1.9 Electrical data/ratings and characteristics The detail specification shall giv

33、e the units and tolerances or limiting values for the following parameters, if applicable. If necessary, electrical data may be listed in tabular form, with reference to style and codes. Operating temperature range Maximum voltage (Umax) Zero power resistance (Rt) Isolation voltage (insulated thermi

34、stors only) Insulation resistance (insulated thermistors only) Trip current (It) Hold current (Ih) Residual current at Umax(Ires) Maximum current (Imax) Time-to-trip (ttrip) Fault current (Ifault) Power dissipation (Pd) EN 62319-1-1:2005 6 1.10 Marking The marking of the thermistors and package cont

35、aining the thermistors shall be in accordance with the requirements of 2.4 of the generic specification IEC 62319-1. The details of the marking of the thermistors and package containing the thermistors shall be given in full in the detail specification. 1.11 Ordering information Orders for thermisto

36、rs covered by this specification shall contain the number and issue reference of the detail specification. 1.12 Additional information (not for inspection purposes) 1.13 Additional or increased severities or requirements to those specified in the generic specification NOTE Additions or increased req

37、uirements should be specified only when essential. 2 Inspection requirements 2.1 Procedures 2.1.1 For qualification approval, the procedures shall be in accordance with the generic specification IEC 62319-1. 2.1.2 For quality conformance inspection, the test schedules (Tables 1 and 2) include sampli

38、ng, periodicity, severities and requirements. The formation of inspection lots is covered by 3.5.7 of the generic specification. The following list applies to the test schedules developed in Tables 1 and 2: 1) Subclause numbers of tests and performance requirements refer to the generic specification

39、 IEC 62319-1 and Clause 1 of this specification. 2) Number to be tested: sample size as directly allotted to the code letter for IL in Table IIA of IEC 60410 (single sampling plan for normal inspection). 3) In these tables: p is the periodicity (in months); n is the sample size; c is the acceptance

40、criteria (permitted number of non-conforming items); D indicates a destructive test; ND indicates a non-destructive test; IL is the inspection level. 4) The temperature at which the zero power resistance shall be measured is the temperature specified in the detail specification. This temperature sha

41、ll be stated, where required, in the test schedule. 5) The specimens used for this group may, at the discretion of the manufacturer, be used for any subsequent group which is identified as being “destructive”. 6) The soldering tests (solderability and resistance to solder heat) shall only be applied

42、 where the thermistor has terminations which are appropriate for soldering. 7) Where the terminations are stated to be suitable for printed wiring applications, the appropriate test conditions in IEC 60068 shall apply. 8) The thermistors shall be mounted by their normal means. 9) Vibration, bump, an

43、d shock tests are only conducted if required in the detail specification. The bump test and the shock test are alternatives. EN 62319-1-1:2005 7 10) 100 % production testing shall be followed by re-inspection by sampling in order to monitor outgoing quality level by non-conforming items per million

44、(106). The sampling level shall be established by the manufacturer. For the calculation of x 106values, any parametric failure shall be counted as a non-conforming item. If one or more non-conforming items occur in a sample, this lot shall be rejected. 11) The number of cycles for a high breaking cu

45、rrent device (Imax100 A) in the cycle life test shall be specified in the detail specification. 12) The duration for a high breaking current device (Imax100 A) in the trip endurance test shall be specified in the detail specification. 13) The subgroup B2 tests are only conducted if required in the d

46、etail specification. Table 1 Test schedule for quality conformance inspection: lot-by-lot IL n c Subclause number and test (see list item 1) D or ND 3) Conditions of test (see list item 1) (see list item 3) Performance requirements (see list item 1) GROUP A INSPECTION (lot-by-lot) Subgroup A0 4.4 Ze

47、ro power resistance ND 100 % of production followed by sampling re-inspection (see list item 10) Temperature: C S-4 2) 0 Rmin100 A types only) D Current: A Time: min Temperature: C Time: min Temperature: C 24 5 0 Voltage across PTC VPower dissipation W Subgroups C1A and C1B Combined sample of specim

48、ens of Sub-groups C1A and C1B 4.6 Voltage proof (insulated types only) D Method: Applied voltage: V 24 5 0 As in 4.6.4 Subgroup C2A Part of sample 4.8.2 Resistance to soldering heat (see list item 6) 4.7 Robustness of terminations D Solder temperature: 260 C Time: s Zero power resistance Visual exam

49、ination As appropriate Final measurements: Visual examination Hold current (4.15): Current : A Time: min Temperature C Time-to-trip (4.17): Applied voltage: V Fault current: A Temperature: C 24 5 0 See 4.4, with R/R: from % to % As in 4.3.1 As in 4.3.1 Voltage across PTC VTime s EN 62319-1-1:2005 9 Table 2 Test schedule for quality conformance inspection: periodic (continued) Sample size and