EN 62379-3-2015 en Common control interface for networked digital audio and video products - Part 3 Video.pdf

1、BSI Standards PublicationCommon control interface for networked digital audio and video productsPart 3: VideoBS EN 62379-3:2015National forewordThis British Standard is the UK implementation of EN 62379-3:2015. It is identical to IEC 62379-3:2015.The UK participation in its preparation was entrusted

2、 to TechnicalCommittee EPL/100, Audio, video and multimedia systems and equipment.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its cor

3、rect application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 81635 2ICS 33.160; 35.100Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and S

4、trategy Committee on 30 September 2015.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62379-3:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62379-3 September 2015 ICS 33.160; 35.100 English Version Common control interface for networked digital audio

5、 and video products - Part 3: Video (IEC 62379-3:2015) Interface de commande commune destin aux produits audio et vido numriques connects en rseau - Partie 3: Vido (IEC 62379-3:2015) Gemeinsame Steuerschnittstelle fr netzwerkbetriebene digitale Audio- und Videogerte - Teil 3: Video (IEC 62379-3:2015

6、) This European Standard was approved by CENELEC on 2015-07-10. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographica

7、l references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibili

8、ty of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, For

9、mer Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechni

10、cal Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No.

11、EN 62379-3:2015 E BS EN 62379-3:2015EN 62379-3:2015 2 European foreword The text of document 100/2465/FDIS, future edition 1 of IEC 62379-3, prepared by Technical Area 4 “Digital system interfaces and protocols“ of IEC/TC 100 “Audio, video and multimedia systems and equipment“ was submitted to the I

12、EC-CENELEC parallel vote and approved by CENELEC as EN 62379-3:2015. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-04-10 latest date by which the national standard

13、s conflicting with the document have to be withdrawn (dow) 2018-07-10 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement noti

14、ce The text of the International Standard IEC 62379-3:2015 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 62379-2:2008 NOTE Harmonized as EN 62379-2:2009 (not mo

15、dified). IEC 62379-5 Series NOTE Harmonized as EN 62379-5 Series. IEC 62379-7 NOTE Harmonized as EN 62379-7. BS EN 62379-3:2015EN 62379-3:2015 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or

16、 in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication ha

17、s been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu Publication Year Title EN/HD Year IEC 62379-1 2007 Common control interface f

18、or networked digital audio and video products - Part 1: General EN 62379-1 2007 BS EN 62379-3:2015 2 IEC 62379-3:2015 IEC 2015 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references. 7 3 Terms, definitions and abbreviations 7 3.1 Terms and definitions 7 3.2 Abbreviations 7 4 Video f

19、ormat definitions . 7 4.1 Video signal format definitions . 7 General . 7 4.1.1Video parameters . 7 4.1.2Video signal formats 9 4.1.34.2 Video transport format definitions 10 General . 10 4.2.1Video transport root location. 10 4.2.24.3 Video metadata format definitions 10 General . 10 4.3.1Video met

20、adata root location 10 4.3.25 MIB definitions for video blocks 11 5.1 General . 11 5.2 Type definitions . 11 General . 11 5.2.1Textual conventions . 11 5.2.2Sequences . 11 5.2.35.3 Video port and associated managed object type definitions 12 Generic port functionality . 12 5.3.1Video locked to refer

21、ence . 13 5.3.25.4 Other video block and associated managed object type definitions . 14 Video mixer blocks . 14 5.4.1Video crosspoint blocks 16 5.4.2Video converter blocks . 18 5.4.3Video level alarm blocks . 19 5.4.4Annex A (informative) Machine-readable video format definitions 22 Annex B (inform

22、ative) Machine-readable video block definitions 48 Annex C (informative) Tree of example video formats . 61 Annex D (informative) Worked examples 64 Bibliography . 65 Figure 1 Video port blocks 12 Figure 2 Video mixer block . 14 Figure 3 Video crosspoint block 16 Figure 4 Video converter block . 18

23、Figure 5 Video level alarm block . 19 BS EN 62379-3:2015IEC 62379-3:2015 IEC 2015 3 Table 1 Managed objects for video ports 13 Table 2 Managed objects for video locked 13 Table 3 Managed objects for video mixer blocks . 14 Table 4 Managed objects for video crosspoint blocks 17 Table 5 Managed object

24、s for video converter blocks . 18 Table 6 Managed objects for video level alarm blocks . 20 BS EN 62379-3:2015 4 IEC 62379-3:2015 IEC 2015 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ COMMON CONTROL INTERFACE FOR NETWORKED DIGITAL AUDIO AND VIDEO PRODUCTS Part 3: Video FOREWORD 1) The International E

25、lectrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fiel

26、ds. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC

27、 National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardizati

28、on (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representa

29、tion from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cann

30、ot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publication

31、s. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, acc

32、ess to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including ind

33、ividual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon

34、, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements o

35、f this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62379-3 has been prepared by technical area 4: Digital system interfaces and protocols of IEC technical committee 100: Audio, video

36、and multimedia systems and equipment. The text of this standard is based on the following documents: FDIS Report on voting 100/2465/FDIS 100/2495/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication h

37、as been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 62379 series, published under the general title Common control interface for networked digital audio and video products, can be found on the IEC website. BS EN 62379-3:2015IEC 62379-3:2015 IEC 2015 5 Th

38、e committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised

39、 edition, or amended. A bilingual version of this publication may be issued at a later date. BS EN 62379-3:2015 6 IEC 62379-3:2015 IEC 2015 INTRODUCTION The IEC 62379 series specifies the common control interface, a protocol for managing equipment which conveys audio and/or video across digital netw

40、orks. The following parts exist or are planned: 1) General 2) Audio 3) Video 4) Data 5) Transmission over networks 6) Packet transfer service 7) Measurement for EBU ECN-IPM IEC 62379-1:2007, specifies aspects which are common to all equipment, and it includes an introduction to the common control in

41、terface. IEC 62379-2:2008, IEC 62379-3 (this standard) and IEC 62379-4 (under consideration) specify control of internal functions specific to equipment carrying particular types of live media. IEC 62379-4 refers to time-critical data such as commands to automation equipment, but not to packet data

42、such as the control messages themselves. IEC 62379-5 specifies control of transmission of these media over each individual network technology. It includes network specific management interfaces along with network specific control elements that integrate into the control framework. IEC 62379-5-1 spec

43、ifies management of aspects which are common to all network technologies. IEC 62379-5-2 specifies protocols which can be used between networking equipment to enable the setting up of calls which are routed across different networking technologies. IEC 62379-5-3, onwards, specify management of aspect

44、s which are particular to individual networking technologies. IEC 62379-6, specifies carriage of control and status messages and non-audiovisual data over transports that do not support audio and video, such as RS232 serial links, with (as for IEC 62379-5) a separate subpart for each technology. IEC

45、 62379-7 specifies aspects that are specific to the measurement of the service experienced by audio and video streams and in particular to the requirements of EBU ECN-IPM Measurements Group. BS EN 62379-3:2015IEC 62379-3:2015 IEC 2015 7 COMMON CONTROL INTERFACE FOR NETWORKED DIGITAL AUDIO AND VIDEO

46、PRODUCTS Part 3: Video 1 Scope This part of IEC 62379 details aspects of the common control interface specified in IEC 62379-1 that are specific to video. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its ap

47、plication. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 62379-1:2007, Common control interface for networked audio and video products Part 1: General 3 Terms, definitions and abbrev

48、iations 3.1 Terms and definitions For the purposes of this document, the terms and definitions given in IEC 62379-1 apply. 3.2 Abbreviations EBU ECN-IPM European Broadcasting Union Expert Community Network and Infrastructure Internet Protocol Measurement HD High Definition OID Object Identifier PSF

49、Progressive Segmented Frame SD Standard Definition UHD Ultra High Definition 4 Video format definitions 4.1 Video signal format definitions General 4.1.1At any point in the video signal chain, the video data will be in a particular format. For management purposes, the format shall be identified by an object identifier, either a “Common control interface standard” object identifier as defined in this standard or an object identifier defined elsewhere. NOTE Permitting video format