EN 62386-203-2009 en Digital addressable lighting interface - Part 203 Particular requirements for control gear - Discharge lamps (excluding fluorescent lamps) (device type 2)《数字可寻.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI British StandardsWB9423_BSI_StandardColCov_noK_AW:BSI FRONT COVERS 5/9/08 12:55 Page 1Digital addressable lighting interface Part 203: Particular requirements for control gear Discharge lamps (exclud

2、ing fluorescent lamps) (devicetype 2)BS EN 62386-203:2009National forewordThis British Standard is the UK implementation of EN 62386-203:2009. It isidentical to IEC 62386-203:2009.The UK participation in its preparation was entrusted by Technical CommitteeCPL/34, Lamps and related equipment, to Subc

3、ommittee CPL/34/3, Auxiliariesfor lamps.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2009ISBN 978 0 580 5

4、7538 9ICS 29.140.50; 29.140.99Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 October 2009Amendments issued since publicationAmd. No. Date Text affectedBRITISH

5、STANDARDBS EN 62386-203:2009EUROPEAN STANDARD EN 62386-203 NORME EUROPENNE EUROPISCHE NORM August 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 1

6、7, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62386-203:2009 E ICS 29.140.50; 29.140.99 English version Digital addressable lighting interface - Part 203: Particular requirements for control gear - Disc

7、harge lamps (excluding fluorescent lamps) (device type 2) (IEC 62386-203:2009) Interface dclairage adressable numrique - Partie 203: Exigences particulires pour les appareillages de commande - Lampes dcharge ( lexclusion des lampes fluorescentes) (dispositif de type 2) (CEI 62386-203:2009) Digital a

8、dressierbare Schnittstelle fr die Beleuchtung - Teil 203: Besondere Anforderungen an Betriebsgerte - Entladungslampen (ausgenommen Leuchtstofflampen) (Gertetyp 2) (IEC 62386-203:2009) This European Standard was approved by CENELEC on 2009-07-01. CENELEC members are bound to comply with the CEN/CENEL

9、EC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CE

10、NELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official version

11、s. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, S

12、lovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 62386-203:2009EN 62386-203:2009 - 2 - Foreword The text of document 34C/875/FDIS, future edition 1 of IEC 62386-203, prepared by SC 34C, Auxiliaries for lamps, of IEC TC 34, Lamps and related equipment, was submitted to the

13、IEC-CENELEC parallel vote and was approved by CENELEC as EN 62386-203 on 2009-07-01. This Part 203 is to be used in conjunction with EN 62386-101 and EN 62386-102, which contain general requirements for the relevant product type (control gear or control devices). The following dates were fixed: late

14、st date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-04-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2012-07-01 Annex ZA has been added by CENELEC. _ Endorsem

15、ent notice The text of the International Standard IEC 62386-203:2009 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60598-1 NOTE Harmonized as EN 60598-1:2008 (m

16、odified). IEC 60669-2-1 NOTE Harmonized as EN 60669-2-1:2004 (modified). IEC 60921 NOTE Harmonized as EN 60921:2004 (not modified). IEC 60923 NOTE Harmonized as EN 60923:2005 (not modified). IEC 60925 NOTE Harmonized as EN 60925:1991 (not modified). IEC 60929 NOTE Harmonized as EN 60929:2006 (not mo

17、dified). IEC 61347-1 NOTE Harmonized as EN 61347-1:2008 (modified). IEC 61347-2-3 NOTE Harmonized as EN 61347-2-3:2001 (not modified). IEC 61547 NOTE Harmonized as EN 61547:2009 (not modified). IEC 62034 NOTE Harmonized as EN 62034:2006 (not modified). CISPR 15 NOTE Harmonized as EN 55015:2006 (not

18、modified). _ BS EN 62386-203:2009- 3 - EN 62386-203:2009 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the ed

19、ition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 62386

20、-101 2009 Digital addressable lighting interface - Part 101: General requirements - System EN 62386-101 2009 IEC 62386-102 2009 Digital addressable lighting interface - Part 102: General requirements - Control gearEN 62386-102 2009 BS EN 62386-203:2009 2 62386-203 IEC:2009 CONTENTS FOREWORD.3 INTROD

21、UCTION.5 1 Scope.6 2 Normative references .6 3 Terms and definitions .6 4 General 7 5 Electrical specifications 7 6 Interface power supply .7 7 Transmission protocol structure7 8 Timing 7 9 Method of operation .7 10 Declaration of variables 8 11 Definition of commands 9 12 Test procedures .13 Annex

22、A (informative) Examples 25 Bibliography26 Figure 1 Example of the use of the “Arc Power At Requested Value“ bit 8 Figure 2 Application extended control or configuration command sequence example 9 Figure 3 Test sequence “Physical selection supported”14 Figure 4 Test sequence START IDENTIFICATION .15

23、 Figure 5 Test sequence MAINS VOLTAGE TOO LOW 16 Figure 6 Test sequence MAINS VOLTAGE TOO HIGH .17 Figure 7 LAMP VOLTAGE OUT OF SPECIFICATION .18 Figure 8 QUERY WAITING FOR IGNITION, IGNITION TIME OUT 19 Figure 9 QUERY CYCLING FAIL 20 Figure 10 QUERY THERMAL OVERLOAD21 Figure 11 QUERY HID STATUS .22

24、 Figure 12 QUERY EXTENDED VERSION NUMBER .23 Figure 13 RESERVED APPLICATION EXTENDED COMMANDS 24 Table 1 - Declaration of additional variables .9 Table 2 Summary of the application extended command set 13 BS EN 62386-203:200962386-203 IEC:2009 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ DIGITAL AD

25、DRESSABLE LIGHTING INTERFACE Part 203: Particular requirements for control gear Discharge lamps (excluding fluorescent lamps) (device type 2) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical commi

26、ttees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical

27、 Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental

28、and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreem

29、ents of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use an

30、d are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote

31、international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated

32、 in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to I

33、EC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and e

34、xpenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) A

35、ttention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62386-203 has been prepared by subcommittee 34C: Auxiliaries for lam

36、ps, of IEC technical committee 34: Lamps and related equipment. The text of this standard is based on the following documents: FDIS Report on voting 34C/875/FDIS 34C/884/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above t

37、able. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. BS EN 62386-203:2009 4 62386-203 IEC:2009 This Part 203 is intended to be used in conjunction with IEC 62386-101 and IEC 62386-102, which contain general requirements for the relevant product type (control gea

38、r or control devices). A list of all parts of IEC 62386 series, under the general title Digital addressable lighting interface, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IE

39、C web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition; or amended. BS EN 62386-203:200962386-203 IEC:2009 5 INTRODUCTION This first edition of IEC 62386-203 is published in

40、 conjunction with IEC 62386-101 and IEC 62386-102. The division of IEC 62386 into separately published parts provides for ease of future amendments and revisions. Additional requirements will be added as and when a need for them is recognised. This International Standard, and the other parts that ma

41、ke up the IEC 62386-200 series, in referring to any of the clauses of IEC 62386-101 or IEC 62386-102, specify the extent to which such a clause is applicable and the order in which the tests are to be performed. The parts also include additional requirements, as necessary. All parts which make up th

42、e IEC 62386-200 series are self-contained and therefore do not include references to each other. Where the requirements of any of the clauses of IEC 62386-101 or IEC 62386-102 are referred to in this International Standard by the sentence “The requirements of IEC 62386-1XX, clause n apply”, this sen

43、tence is to be interpreted as meaning that all requirements of the clause in question of Part 101 or Part 102 apply, except any which are clearly inapplicable to the specific type of lamp control gear covered by Part 203. All numbers used in this International Standard are decimal numbers unless oth

44、erwise noted. Hexadecimal numbers are given in the format 0xVV, where VV is the value. Binary numbers are given in the format XXXXXXXXb or in the format XXXX XXXX, where X is 0 or 1; x in binary numbers means dont care. BS EN 62386-203:2009 6 62386-203 IEC:2009 DIGITAL ADDRESSABLE LIGHTING INTERFACE

45、 Part 203: Particular requirements for control gear Discharge lamps (excluding fluorescent lamps) (device type 2) 1 Scope This International Standard specifies a protocol and test procedures for the control of electronic control gear by digital signals used on a.c. or d.c. supplies, associated with

46、discharge lamps (excluding fluorescent lamps). NOTE Tests in this standard are type tests. Requirements for testing individual control gear during production are not included. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated

47、references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 62386-101:2009, Digital addressable lighting interface Part 101: General requirements; System IEC 62386-102:2009, Digital addressable lighting int

48、erface Part 102: General requirements Control gear 3 Terms and definitions For the purposes of this document, the terms and definitions given in Clause 3 of IEC 62386-101:2009 and Clause 3 of IEC 62386-102:2009 apply, with the following additional terms and definitions. 3.1 lamp cycling periodic ign

49、iting and extinguishing of the lamp 3.2 lamp failure lamp parameter outside of the tolerances for the normal lamp operation NOTE The number of attempts to ignite the lamp parameter before final switching off is control gear dependent. 3.3 run-up time time which the system of control gear and lamp(s) needs to set the lamp output power to its nominal lamp power value after switching on the lamp 3.4 waiting