EN 62444-2013 en Cable glands for electrical installations.pdf

1、BSI Standards PublicationCable glands for electrical installationsBS EN 62444:2013BS EN 62444:2013National forewordThis British Standard is the UK implementation of EN 62444:2013. It is identical to IEC 62444:2010. It supersedes BS EN 50262:1999 which is withdrawn.The CENELEC common modifications ha

2、ve been implemented at the appropriate places in the text. The start and finish of each common modification is indicated in the text by .The UK participation in its preparation was entrusted to Technical Committee PEL/213, Cable management.A list of organizations represented on this committee can be

3、 obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014ISBN 978 0 580 82752 5ICS 29.120.10Complian

4、ce with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2014.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDEUROPEAN STANDARD EN 6244

5、4 NORME EUROPENNE EUROPISCHE NORM October 2013 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights

6、 of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62444:2013 E ICS 29.120.10 English version Cable glands for electrical installations (IEC 62444:2010, modified) Presse-toupes pour installations lectriques (CEI 62444:2010, modifie) Kabelverschraubungen

7、 fr elektrische Installationen (IEC 62444:2010, modifiziert) This European Standard was approved by CENELEC on 2013-09-23. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard

8、without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in an

9、y other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia,

10、 Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey a

11、nd the United Kingdom. BS EN 62444:2013EN 62444:2013 - 2 - Foreword This document (EN 62444:2013) consists of the text of IEC 62444:2010 prepared by IEC/TC 23 “Electrical accessories“, together with the common modifications prepared by CLC/TC 213 “Cable management systems“. The following dates are f

12、ixed: latest date by which this document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-09-23 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2016-09-23 This document supersed

13、es EN 50262:1998. EN 62444:2013 includes the following significant technical changes with respect to EN 50262:1998: - 1 Scope - 3 Terms and definitions - 5 General conditions for tests - 6 Classification - 9 Mechanical properties - 9.5 Resistance to impact - 10.3.2 Electrical current test - 12.2 Res

14、istance to corrosion - Table 2 Pull forces for cable retention and cable anchorage Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 62444:2010 are prefixed “Z”. Attention is drawn to the possibility that some of the elements of this document may be the sub

15、ject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). _ BS EN 62444:2013-

16、3 - EN 62444:2013 Endorsement notice The text of the International Standard IEC 62444:2010 was approved by CENELEC as a European Standard with agreed common modifications. BS EN 62444:2013EN 62444:2013 - 4 - Annex ZA (normative) Normative references to international publications with their correspon

17、ding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any a

18、mendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60423 2007 Conduit systems for cable management - Outside diameters of conduits for electrical installations and

19、 threads for conduits and fittings EN 60423 2007 IEC 60529 + A1 1989 1999 Degrees of protection provided by enclosures (IP Code) EN 60529 + corr. May + A1 1991 1993 2000 IEC 60695-2-11 + corr. January 2000 2001 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammabi

20、lity test method for end-products EN 60695-2-11 2001 ISO 868 2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) EN ISO 868 2003 ISO 4287 1997 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and su

21、rface texture parameters EN ISO 4287 1998 ISO 9227 2006 Corrosion tests in artificial atmospheres - Salt spray tests EN ISO 9227 2006 BS EN 62444:2013 2 62444 IEC:2010 CONTENTS 1 Scope.6 2 Normative references .6 3 Terms and definitions .6 4 General requirements.7 5 General conditions for tests8 6 C

22、lassification9 6.1 According to material.9 6.2 According to mechanical properties.9 6.3 According to electrical properties 10 6.4 According to resistance to external influences .10 6.5 According to sealing system 10 7 Marking and documentation11 7.1 Marking .11 7.2 Durability and legibility 11 7.3 D

23、ocumentation 11 8 Construction.12 9 Mechanical properties 12 9.1 General .12 9.2 Cable retention test .13 9.3 Cable anchorage test for non-armoured cable .15 9.4 Cable anchorage test for armoured cable 17 9.5 Resistance to impact .19 9.6 Seal performance 22 10 Electrical properties22 10.1 Equipotent

24、ial bonding to electrical equipment22 10.2 Equipotential bonding to metallic layer(s) of cable .22 10.3 Protective connection to earth .23 10.3.1 General .23 10.3.2 Electrical current test.23 11 Electromagnetic compatibility .24 12 External influences .25 12.1 Degree of protection in accordance with

25、 IEC 60529 (IP Code).25 12.1.1 General .25 12.1.2 Degree of protection against foreign solid objects25 12.1.3 Degree of protection against ingress of water 25 12.2 Resistance to corrosion.25 12.3 Resistance to ultraviolet light.25 13 Fire hazard.26 13.1 Reaction to fire26 13.1.1 General .26 13.1.2 C

26、ontribution to fire.26 13.1.3 Spread of fire 26 13.2 Resistance to fire 26 BS EN 62444:201362444 IEC:2010 3 Annex A (normative) Particular requirements for cable glands for electrical installations with NPT entry threads 27 Annex B (informative) Test sequence.28 Bibliography29 Figure 1 Typical arran

27、gement for cable retention test.14 Figure 2 Typical arrangement for cable anchorage pull test .16 Figure 3 Typical arrangement for cable anchorage twist test17 Figure 4 Typical arrangement for cable anchorage test for armoured cable18 Figure 5 Typical arrangement for impact test .21 Figure 6 Typical

28、 arrangement for electrical current tests 24 Table 1 Clearance holes for cable glands for test purposes .9 Table 2 Pull forces for cable retention and cable anchorage 15 Table 3 Torque value for cable anchorage twist test 17 Table 4 Impact values20 Table 5 Electrical current values 23 Table A.1 Clea

29、rance holes for NPT cable glands for test purposes 27 BS EN 62444:2013 6 62444 IEC:2010 CABLE GLANDS FOR ELECTRICAL INSTALLATIONS 1 Scope This Standard provides requirements and tests for the construction and performance of cable glands. This standard covers complete cable glands as supplied by the

30、manufacturer or the supplier responsible for placing the product on the market. This standard does not cover cable glands for mineral insulated cables. This standard covers cable glands with IEC 60423 metric entry threads. NOTE Certain cable glands may also be used “in Hazardous Areas.” Regard shoul

31、d then be taken of other or additional requirements necessary for the enclosure to be installed in such conditions, for example as specified in the IEC 60079 series. 2 Normative references 3 Terms and definitions For the purposes of this document, the following definitions apply. 3.1 cable gland a d

32、evice designed to permit the entry of a cable, flexible cable or insulated conductor into an enclosure, and which provides sealing and retention. It may also provide other functions such as earthing, bonding, insulation, cable guarding, strain relief or a combination of these BS EN 62444:2013Text de

33、letedSee Annex ZA.3.2 entry thread the threaded portion of a cable gland which is intended to be attached to an enclosure or equipment 3.3 cable gland size the nominal diameter of the entry thread 3.4 cable retention the minimum ability of a cable gland to limit the displacement of a fitted cable un

34、der static load 62444 IEC:2010 7 3.5 cable anchorage the ability of a cable gland to limit the displacement of a fitted cable under dynamic and torque loads 3.6 series cable glands of the same classification and design but with different dimensions 3.7 clearance hole unthreaded opening in an enclosu

35、re or equipment intended to permit entry of a cable gland 3.8 metallic cable gland cable gland which consists of metallic material only NOTE Sealing systems are excluded from this definition. 3.9 non-metallic cable gland cable gland which consists of non-metallic material only NOTE Sealing systems a

36、re excluded from this definition. 3.10 composite cable gland cable gland comprising both metallic and non-metallic materials NOTE Sealing systems are excluded from this definition. 3.11 single-orifice seal seal with one orifice suitable for the passage of a single cable 3.12 multi-orifice seal seal

37、with more than one orifice, each orifice being suitable for the passage of a separate cable 4 General requirements Cable glands shall be designed to provide in normal use all the functions declared by the manufacturer or supplier. BS EN 62444:2013 8 62444 IEC:2010 5 General conditions for tests 5.1

38、Tests according to this standard are type tests. 5.2 Unless otherwise specified, the tests shall be carried out on new cable glands assembled and mounted in accordance with the manufacturers or suppliers instructions, as declared in 7.3. There shall be no adjustment between or during the tests. NOTE

39、 Remounting of the sample between tests is not considered to be adjustment. 5.3 Unless otherwise specified, the tests shall be carried out at an ambient temperature of (20 5) C. 5.4 Non-metallic and composite cable glands as well as the sealing systems of metallic cable glands shall be pre-condition

40、ed in an oven at (70 2) C and maintained for (168 4) h. If the maximum temperature declared by the manufacturer is greater than 65 C, then the test temperature shall be the declared temperature +5 C. 5.5 Prior to the tests, non-metallic and composite cable glands as well as the sealing systems of me

41、tallic cable glands shall be conditioned at a temperature of (20 5) C and a relative humidity between 40 % and 60 % for a minimum of 24 h or longer as specified by the manufacturer. 5.6 Unless otherwise specified, three samples shall be subjected to the relevant tests. In the case of a series of cab

42、le glands, three samples of the largest and smallest and one sample of all other sizes of the same series shall be subjected to the relevant tests. In the case of a cable gland utilising alternative sealing arrangements, each sealing arrangement as specified by the manufacturer or supplier shall be

43、considered as a sample. If a sample does not satisfy a test due to an assembly or manufacturing fault, that test and any preceding one which may have influenced the results of the test shall be repeated on 3 new samples of the size that failed. The tests which follow shall be made in the required se

44、quence. All new samples shall fulfil the requirements. 5.7 Unless otherwise specified test mandrels shall consist of bars having a hardness of 65 Shore D 15 points in accordance with ISO 868 and a surface roughness less than or equal to 7 m Rain accordance with ISO 4287. The test mandrel shall have

45、a tolerance of 0,2 mm for test mandrels up to and including 16 mm in diameter and 0,3 mm for test mandrels larger than 16 mm in diameter. The shape shall be circular or a profile simulating the outer dimension of the cables as declared by the manufacturer or supplier. 5.8 Clearance holes for test pu

46、rposes shall have the values as given in Table 1, unless otherwise specified by the manufacturer or supplier. NOTE Annex B shows test sequences which shall be used for guidance only. BS EN 62444:201362444 IEC:2010 9 Table 1 Clearance holes for cable glands for test purposes 6 Classification Cable gl

47、ands shall be classified for test purposes in accordance with 6.1, 6.2 and 6.5 and where appropriate, with 6.3 and 6.4. 6.1 According to material 6.1.1 Metallic cable glands 6.1.2 Non-metallic cable glands 6.1.3 Composite cable glands 6.2 According to mechanical properties 6.2.1 Non-armoured cable r

48、etention or anchorage 6.2.1.1 Anchorage Type A 6.2.1.2 Anchorage Type B 6.2.1.3 Retention only 6.2.2 Armoured cable anchorage 6.2.2.1 Anchorage Type C 6.2.2.2 Anchorage Type D 6.2.3 Impact category Cable gland size Thread size Clearance hole diameter mm 6 M 6 6 (0/ +0,2) 8 M 8 8 (0/ +0,2) 10 M 10 10

49、 (0/ +0,2) 12 M 12 12 (0/ +0,2) 16 M 16 16 (0/ +0,2) 20 M 20 20 (0/ +0,2) 25 M 25 25 (0/ +0,2) 32 M 32 32 (0/ +0,3) 40 M 40 40 (0/ +0,3) 50 M 50 50 (0/ +0,4) 63 M 63 63 (0/ +0,4) 75 M 75 75 (0/ +0,5) 90 M 90 90 (0/ +0,5) 110 M 110 110 (0/ +0,5) BS EN 62444:2013 10 62444 IEC:2010 6.2.3.1 Category 1 6.2.3.2 Category 2 6.2.3.3 Category 3 6.2.3.4 Category 4 6.2.3.5 Category 5 6.2.3.6 Category 6 6.2.3.7 Category 7 6.2.3.8 Category 8 6.3 According to electric