EN 62485-3-2014 en Safety requirements for secondary batteries and battery installations - Part 3 Traction batteries.pdf

1、BSI Standards PublicationSafety requirements for secondary batteries and battery installationsPart 3: Traction batteriesBS EN 62485-3:2014National forewordThis British Standard is the UK implementation of EN 62485-3:2014. It isidentical to IEC 62485-3:2014. It supersedes BS EN 50272-3:2002 which wil

2、lbe withdrawn on 14 August 2017.The UK participation in its preparation was entrusted to TechnicalCommittee PEL/21, Secondary cells and batteries.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the nece

3、ssary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 88576 1ICS 29.220.20; 29.220.30; 43.040.10Compliance with a British Standard cannot confer immunity fromlegal obligations.Thi

4、s British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 November 2014. Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62485-3:2014EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 62485-3 October 2014 ICS 29.220.

5、20; 29.220.30; 43.040.10 Supersedes EN 50272-3:2002 English Version Safety requirements for secondary batteries and battery installations - Part 3: Traction batteries (IEC 62485-3:2014) Exigences de scurit pour les batteries daccumulateurs etles installations de batteries - Partie 3: Batteries de tr

6、action (CEI 62485-3:2014) Sicherheitsanforderungen an Batterien und Batterieanlagen -Teil 3: Antriebsbatterien fr Elektrofahrzeuge (IEC 62485-3:2014) This European Standard was approved by CENELEC on 2014-08-14. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stip

7、ulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This Europe

8、an Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC memb

9、ers are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Nor

10、way, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation ElectrotechniqueEuropisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue

11、 Marnix 17, B-1000 Brussels 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62485-3:2014 E EN 62485-3:2014 - 2 - Foreword The text of document 21/834/FDIS, future edition 2 of IEC 62485-3, prepared by IEC/TC 21 “Secondary cells

12、 and batteries“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62485-3:2014. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2015-05-14 late

13、st date by which the national standards conflicting with the document have to be withdrawn (dow) 2017-08-14 This document supersedes EN 50272-3:2002. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be

14、held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62485-3:2014 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the st

15、andard indicated : IEC 61429 NOTE Harmonized as EN 61429. BS EN 62485-3:2014- 3 - EN 62485-3:2014 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this do

16、cument and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indica

17、ted by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60204-1 - Safety of machinery - Electrical equipment of machines - Part 1: General re

18、quirements EN 60204-1 - IEC 60364-4-41 (mod) - 2005 - Low-voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock HD 60364-4-41 + corrigendum Jul. 2007 2007 IEC 60900 - Live working - Hand tools for use up to 1 000 V a.c. and 1 500 V d.c. EN 60900 - IE

19、C 61140 - Protection against electric shock - Common aspects for installation and equipment EN 61140 - ISO 3864 series Graphical symbols - Safety colours and safety signs - - BS EN 62485-3:2014 2 IEC 62485-3:2014 IEC 2014 CONTENTS 1 Scope 6 2 Normative references . 6 3 Terms and definitions. 6 4 Pro

20、tection against electric shock by the battery and charger . 8 4.1 General . 8 4.2 Protection against both direct and indirect contact . 9 4.3 Protection against direct and indirect contact when discharging the traction battery on the vehicle (battery disconnected from charger/mains) 9 4.4 Protection

21、 against direct and indirect contact when charging the traction battery 10 5 Prevention of short circuits and protection from other effects of electric current 10 5.1 Cables and cell connectors 10 5.2 Protective measures during maintenance 10 5.3 Battery insulation. 11 6 Provisions against explosion

22、 hazards by ventilation 11 6.1 Gas generation . 11 6.2 Ventilation requirements 12 6.2.1 General . 12 6.2.2 Calculation of the minimum ventilation air flow . 12 6.2.3 Recommended charging practice . 13 6.2.4 Special chargers 14 6.2.5 Multiple charging 14 6.3 Natural ventilation . 14 6.4 Forced venti

23、lation 15 6.5 Close vicinity to the battery 15 6.6 Ventilation of battery compartment 15 7 Provisions against electrolyte hazard 15 7.1 Electrolyte and water . 15 7.2 Protective clothing . 15 7.3 Accidental contact, “first aid“ . 16 7.3.1 General . 16 7.3.2 Eye contact 16 7.3.3 Skin contact . 16 7.4

24、 Battery accessories and maintenance tools . 16 8 Battery containers and enclosures 16 9 Accommodation for charging/maintenance . 16 10 Battery peripheral equipment/accessories 17 10.1 Battery monitoring system . 17 10.2 Central water filling system 18 10.2.1 General . 18 10.2.2 Safety aspects . 18

25、10.3 Central degassing systems 18 10.4 Thermal management systems 19 10.5 Electrolyte agitation system . 19 10.6 Catalyst vent plugs 19 BS EN 62485-3:2014IEC 62485-3:2014 IEC 2014 3 10.7 Connectors (plugs/sockets) . 19 11 Identification labels, warning notices and instructions for use, installation

26、and maintenance 19 11.1 Warning labels 19 11.2 Identification label . 20 11.3 Instructions . 20 11.4 Other labels 20 12 Transportation, storage, disposal and environmental aspects . 20 12.1 Packing and transport . 20 12.2 Disassembly, disposal, and recycling of batteries . 21 13 Inspection and monit

27、oring 21 Bibliography 22 Table 1 Guideline: Maximum final charging current in A per 100 Ah during normal conditions of use . 14 BS EN 62485-3:2014 6 IEC 62485-3:2014 IEC 2014 SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS Part 3: Traction batteries 1 Scope This part of the IEC

28、 62485 applies to secondary batteries and battery installations used for electric vehicles, e.g. in electric industrial trucks (including lift trucks, tow trucks, cleaning machines, automatic guided vehicles), in battery powered locomotives, in electric vehicles (e.g. goods vehicles, golf carts, bic

29、ycles, wheelchairs), and does not cover the design of such vehicles. This International Standard covers lead dioxide-lead (lead-acid), nickel oxide-cadmium, nickel-oxide-metal hydride and other alkaline secondary batteries. Safety aspects of secondary lithium batteries in such applications will be c

30、overed in their own appropriate standards. The nominal voltages are limited to 1 000 V a.c. and 1 500 V d.c. respectively and the principal measures for protection against hazards generally from electricity, gas emission and electrolyte are described. It provides requirements on safety aspects assoc

31、iated with the installation, use, inspection, maintenance and disposal of batteries. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For u

32、ndated references, the latest edition of the referenced document (including any amendments) applies. IEC 60204-1, Safety of machinery Electrical equipment of machines Part 1: General requirements IEC 60364-4-41:2005, Low-voltage electrical installations Part 4-41: Protection for safety Protection ag

33、ainst electric shock IEC 60900, Live working Hand tools for use up to 1 000 V a.c. and 1 500 V d.c. IEC 61140, Protection against electric shock Common aspects for installation and equipment ISO 3864 (all parts), Graphical symbols Safety colours and safety signs 3 Terms and definitions For the purpo

34、ses of this document, the following terms and definitions apply. 3.1 secondary cell cell which is designed to be electrically recharged Note 1 to entry: The recharge is accomplished by way of a reversible chemical reaction. BS EN 62485-3:2014IEC 62485-3:2014 IEC 2014 7 3.2 lead dioxide lead battery

35、accumulators (deprecated) secondary battery with an aqueous electrolyte based on dilute sulphuric acid, a positive electrode of lead dioxide and a negative electrode of lead 3.3 nickel oxide cadmium battery secondary battery with an alkaline electrolyte, a positive electrode containing nickel oxide

36、and a negative electrode of cadmium 3.4 vented cell a secondary cell having a cover provided with an opening through which products of electrolysis and evaporation are allowed to escape freely from the cell to the atmosphere 3.5 valve regulated lead-acid battery VRLA secondary battery in which cells

37、 are closed but have a valve which allows the escape of gas if the internal pressure exceeds a predetermined value Note 1 to entry: The cell cannot normally receive addition to the electrolyte. 3.6 gas-tight sealed cell gas-tight sealed secondary cell secondary cell which remains closed and does not

38、 release either gas or liquid when operated within the limits of charge and temperature specified by the manufacturer Note 1 to entry: The cell may be equipped with a safety device to prevent dangerously high internal pressure. Note 2 to entry: The cell does not require addition to the electrolyte a

39、nd is designed to operate during its life in its original sealed state. 3.7 secondary battery two or more secondary cells connected together and used as a source of electrical energy 3.8 traction battery secondary battery which is designed to provide the propulsion energy for electric vehicles 3.9 m

40、onobloc battery battery with multiple separate but electrically connected cell compartments each of which is designed to house an assembly of electrodes, electrolyte, terminals and interconnections and possible separator Note 1 to entry: The cells in a monobloc battery can be connected in series or

41、parallel. 3.10 electrolyte liquid or solid substance containing mobile ions which render it ionically conductive Note 1 to entry: The electrolyte may be a liquid, solid or a gel. 3.11 gassing of a cell evolution of gas resulting from the electrolysis of water in the electrolyte of the cell BS EN 624

42、85-3:2014 8 IEC 62485-3:2014 IEC 2014 3.12 charging of a battery operation during which a secondary cell or battery is supplied with electrical energy from an external circuit which results in chemical changes within the cell and thus storage of energy as chemical energy 3.13 equalisation charge ext

43、ended charge to ensure an equal state of charge of all cells in a battery 3.14 opportunity charging use of free time during a work period to top up the charge and thus extend the work period of a battery whilst avoiding excessive discharge 3.15 overcharge continued charging of a fully charged second

44、ary cell or battery Note 1 to entry: Overcharge is also the act of charging beyond a certain limit specified by the manufacturer. 3.16 discharge discharge of a battery operation during which a battery delivers, to an external circuit and under specified conditions, electrical energy produced in the

45、cells 3.17 peripheral equipment battery peripheral equipment equipment installed on the battery, which supports or monitors the operation of the battery Note 1 to entry: Examples are a central water filling system, an electrolyte agitation system, a battery monitoring system, a central de-gassing sy

46、stem, the battery connectors (plugs and sockets), a thermal management system, etc. 3.18 charging room room or closed area intended specifically for recharging batteries Note 1 to entry: The room may also be used for battery maintenance. 3.19 charging area open area designated and made suitable for

47、recharging batteries Note 1 to entry: The area may also be used for maintenance of batteries and battery related equipment. 4 Protection against electric shock by the battery and charger 4.1 General Measures shall be taken on traction batteries and in traction battery charging installations for prot

48、ection against either direct contact or indirect contact, or against both direct and indirect contact. These measures are described in detail in IEC 60364-4-41 and IEC 61140. The following clauses and the resulting amendments describe the typical measures to be taken for traction battery installatio

49、ns. BS EN 62485-3:2014IEC 62485-3:2014 IEC 2014 9 The appropriate equipment standard IEC 61140 applies to batteries and direct current distribution circuits located inside equipment. 4.2 Protection against both direct and indirect contact On batteries and in battery charging installations protection against direct contact with live parts shall be ensured in accordance with IEC 60364-4-41. The following protective measures against direct contact apply: protection by insulation of live parts; protection