EN 62591-2016 en Industrial communication networks - Wireless communication network and communication profiles - WirelessHART(tm).pdf

1、Industrial communication networks Wireless communication network and communication profiles WirelessHARTTMBS EN 62591:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implementation of EN 62591:2016. It is identical

2、 to IEC 62591:2016. It supersedes BS EN 62591:2010 which iswithdrawn.The UK participation in its preparation was entrusted to Technical Committee AMT/7, Industrial communications: process measurement and control, including fieldbus.A list of organizations represented on this committee can be obtaine

3、d onrequest to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 85021 9ICS 25.040.40; 35.100.05Complia

4、nce with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 September 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62591:2016EUROPEAN

5、 STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62591 September 2016 ICS 25.040.40; 35.100.05 Supersedes EN 62591:2010 English Version Industrial communication networks - Wireless communication network and communication profiles - WirelessHART(tm) (IEC 62591:2016) Rseaux de communication industriels -

6、Rseau de communications sans fil et profils de communication - WirelessHART(tm) (IEC 62591:2016) Industrielle Kommunikationsnetze - Drahtlose Kommunikationsnetze und Kommunikationsprofile - WirelessHART(tm) (IEC 62591:2016) This European Standard was approved by CENELEC on 2016-05-04. CENELEC member

7、s are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application

8、 to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC M

9、anagement Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland,

10、 Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europische

11、s Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62591:2016 E BS EN 62591:2016EN 62591:2016 2 European foreword The text of

12、document 65C/835/FDIS, future edition 2 of IEC 62591, prepared by SC 65C “Industrial networks” of IEC/TC 65 “Industrial process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62591:2016. The following dates are fixed: latest date by

13、which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-03-16 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-09-16 This document supersedes EN 62591:2010. Atten

14、tion is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62591:2016 was approved by CE

15、NELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61158-6-9:2014 NOTE Harmonized as EN 61158-6-9:2014. IEC 62657-2:2013 NOTE Harmonized as EN 62657-2:2013. IEC 62657-2:2013 NOTE Harm

16、onized as EN 62657-2:2013. BS EN 62591:2016EN 62591:2016 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its ap

17、plication. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applie

18、s. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61158-1 2014 Industrial communication networks - Fieldbus specifications - Part 1: Overview and guidance for the IEC 61158 a

19、nd IEC 61784 series EN 61158-1 2014 IEC 61158-2 - Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition EN 61158-2 - IEC 61158-3-20 2014 Industrial communication networks - Fieldbus specifications - Part 3-20: Data-link layer servic

20、e definition - Type 20 elements EN 61158-3-20 2014 IEC 61158-4-20 2014 Industrial communication networks - Fieldbus specifications - Part 4-20: Data-link layer protocol specification - Type 20 elements EN 61158-4-20 2014 IEC 61158-5-20 2014 Industrial communication networks - Fieldbus specifications

21、 - Part 5-20: Application layer service definition - Type 20 elements EN 61158-5-20 2014 IEC 61158-6-20 2014 Industrial communication networks - Fieldbus specifications - Part 6-20: Application layer protocol specification - Type 20 elements EN 61158-6-20 2014 IEC 61784-1 2014 Industrial communicati

22、on networks - Profiles - Part 1: Fieldbus profiles EN 61784-1 2014 IEC 61784-2 - Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 EN 61784-2 - ISO/IEC 7498-1 - Information technology - Open Systems Interconnection - Ba

23、sic Reference Model: The Basic Model - - ISO/IEC 7498-3 - Information technology - Open Systems Interconnection - Basic Reference Model: Naming and addressing - - ISO/IEC 8824 series Information technology - Abstract Syntax Notation One (ASN.1): Specification of basic notation - series ISO/IEC 8859-

24、1 - Information technology - 8-bit single-byte coded graphic character sets - Part 1: Latin alphabet No.1 - - ISO/IEC 9545 - Information technology - Open Systems Interconnection - Application layer structure - - BS EN 62591:2016EN 62591:2016 4 ISO/IEC 10731 - Information technology - Open Systems I

25、nterconnection - Basic Reference Model - Conventions for the definition of OSI services - - IEEE 802.15.4e 2012 IEEE Standard for Local and metropolitan area networks-Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) Amendment 1: MAC sublayer - - IEEE Std 802-2001 2002 IEEE Standard for

26、 Local and Metropolitan Area Networks: Overview and Architecture - - IEEE std 802.15.4-2011 2011 IEEE Standard for Local and metropolitan area networks-Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) - - ISO/IEC/IEEE 60559 - Information technology - Microprocessor Systems - Floating-P

27、oint arithmetic - - BS EN 62591:2016 2 IEC 62591:2016 IEC 2016 CONTENTS FOREWORD . 24 INTRODUCTION . 26 1 Scope 28 2 Normative references. 28 3 Terms, definitions, symbols, abbreviations and conventions . 29 3.1 Reference model terms and definitions 29 3.1.1 Terms and definitions from ISO/IEC 7498-1

28、 terms and ISO/IEC 7498-3 terms . 29 3.1.2 Terms and definitions from ISO/IEC 9545 . 30 3.1.3 Terms and definitions from ISO/IEC 8824 . 30 3.1.4 Terms and definitions from ISO/IEC 8825-1 31 3.2 Specific terms and definitions 31 3.3 Abbreviations 40 3.4 Conventions 42 3.4.1 Conventions used for DL-se

29、rvices 42 3.4.2 Conventions used for DL-protocol (state machine) 43 3.4.3 Conventions for Application Layer service 44 3.4.4 Conventions for the AL-protocol . 47 4 Physical layer specification and service definition . 51 4.1 General . 51 4.2 Physical layer service definition . 51 4.2.1 General overv

30、iew . 51 4.2.2 Physical layer services . 52 4.3 Physical layer protocol specification 56 5 Data-link layer service definition Type 20 elements 56 5.1 General . 56 5.2 Data-link layer services . 56 5.2.1 Facilities of the data-link layer services 56 5.2.2 QoS for message service . 57 5.2.3 Sequence o

31、f primitives . 58 5.2.4 DL-TRANSMIT service 60 5.2.5 DL-RECEIVE service 62 5.2.6 DL-DISCONNECT service 63 5.2.7 DL-PATH-FAILURE service 63 5.2.8 DL-ADVERTISE service 63 5.2.9 DL-NEIGHBOR service . 64 5.2.10 DLM-SET 64 5.2.11 DLM-GET . 65 5.2.12 DLM-ACTION . 66 5.2.13 DLM-EVENT 67 5.3 Network layer s

32、ervices 67 5.3.1 Facilities of the network layer services 67 5.3.2 QoS for message service . 67 5.3.3 Sequence of primitives . 68 5.3.4 NL-TRANSMIT Service . 68 5.3.5 NLM-SET 70 BS EN 62591:2016IEC 62591:2016 IEC 2016 3 5.3.6 NLM-GET . 71 5.3.7 NLM-ACTION . 71 5.4 Transport layer services 72 5.4.1 F

33、acilities of the transport layer services 72 5.4.2 QoS for message service . 73 5.4.3 Sequence of primitives . 73 5.4.4 TL-DATA-TRANSFER Service . 74 5.4.5 TL-DATA-EXCHANGE Service 76 5.4.6 TLM-SET 78 5.4.7 TLM-GET 78 6 Data-link layer protocol specification Type 20 elements . 79 6.1 General . 79 6.

34、2 Overview. 79 6.2.1 Data-link layer operation 79 6.2.2 Network layer operation . 82 6.2.3 Device procedures . 84 6.3 Logical link control 84 6.3.1 General DLPDU structure . 84 6.3.2 DLPDU-specific structure, encoding and elements of procedure 88 6.3.3 DLPDU Priority and Flow Control 92 6.3.4 Error

35、detection and security 93 6.4 Medium Access Control . 95 6.4.1 Function 95 6.4.2 Slot timing . 95 6.4.3 Communication tables and buffers 98 6.4.4 Link scheduling 104 6.4.5 MAC operation . 108 6.5 DL-management-information . 118 6.5.1 General . 118 6.5.2 DL attributes 118 6.5.3 DLM actions . 119 6.6

36、Network layer 119 6.6.1 Two level model of NL 119 6.6.2 NPDU structure 122 6.6.3 Security function 125 6.6.4 Network layer tables 130 6.6.5 NLE machine . 132 6.6.6 NLE elements of procedure 135 6.6.7 NL-management information 138 6.7 Transport layer 139 6.7.1 General . 139 6.7.2 TPDU structure 139 6

37、.7.3 Transport pipe table . 140 6.7.4 TLE elements of procedure 141 6.7.5 TLE state machines . 144 6.7.6 TL-management information . 147 7 Application layer service definition Type 20 elements 148 7.1 Common concepts . 148 7.2 General . 148 BS EN 62591:2016 4 IEC 62591:2016 IEC 2016 7.3 Data type AS

38、E 148 7.3.1 Overview . 148 7.3.2 Formal definition of data type objects . 150 7.3.3 FAL defined data types 152 7.3.4 Data type ASE service specification . 155 7.3.5 Summary of data types. 155 7.4 Communication model specification . 156 7.4.1 Common parameters 156 7.4.2 ASEs . 157 7.4.3 ARs . 230 7.4

39、.4 Summary of classes . 233 7.4.5 Permitted services by AREP role 233 8 Application layer protocol specification Type 20 elements 234 8.1 General . 234 8.2 Abstract syntax . 234 8.3 Transfer syntax . 234 8.3.1 Common APDU fields . 234 8.3.2 Common APDU structure . 235 8.3.3 Device application servic

40、e-specific APDU structures . 238 8.3.4 Layer management service specific APDU structures 263 8.3.5 Gateway and network manager specific APDU structures 306 8.3.6 Network management configuration specific APDU structures . 328 8.3.7 Data coding rules . 346 8.4 Common procedures . 350 8.4.1 Delayed re

41、sponse 350 8.4.2 Response time . 354 8.5 FAL service protocol machine (FSPM) . 355 8.5.1 General . 355 8.5.2 FSPM state tables 355 8.5.3 Functions used by FSPM 357 8.5.4 Parameters of FSPM/ARPM primitives 358 8.6 Application relationship protocol machines (ARPMs) 359 8.6.1 AREP mapping to transport

42、layer 359 8.6.2 Application relationship protocol machines (ARPMs) . 360 8.6.3 AREP state machine primitive definitions 362 8.6.4 AREP state machine functions 363 8.7 TL mapping protocol machine (TMPM) . 363 8.7.1 TMPM states 363 8.7.2 TMPM state machines 363 8.7.3 Primitives exchanged between trans

43、port layer and TMPM . 364 8.7.4 Functions used by TMPM . 365 9 Communication Profile Family 9 (HART) . 365 9.1 General Overview . 365 9.2 Profile 9/1 . 366 9.3 Profile 9/2 . 366 9.3.1 Conformance statement . 366 9.3.2 Device types 367 9.3.3 Device worldwide applicability 369 9.3.4 Physical layer 370

44、 BS EN 62591:2016IEC 62591:2016 IEC 2016 5 9.3.5 Data-link layer . 373 9.3.6 Application layer 374 Annex A (normative) Security . 385 A.1 General . 385 A.2 Joining 386 A.2.1 The join sequence 386 A.2.2 The network layer join process . 392 A.2.3 The data-link layer join process 393 A.3 Network key ch

45、ange operation . 396 A.4 Security management 397 A.5 Maintenance Port 397 Annex B (normative) Wireless procedures 399 B.1 Initializing a wireless network 399 B.2 Neighbor Discovery . 399 B.3 Path failure . 400 B.4 Device leaving the network 401 Annex C (normative) Network management 403 C.1 Overview

46、. 403 C.2 Network manager functions . 404 Annex D (normative) Gateway 406 D.1 Overview. 406 D.2 Access point . 406 D.3 Functions 408 D.3.1 General requirements . 408 D.3.2 Adding new network devices 409 D.3.3 Device configuration change status notifications . 409 D.3.4 Gateway change notification fu

47、nction 409 D.3.5 Cached response messages . 409 D.3.6 Service access point 410 D.3.7 Communication between gateway and network manager . 410 Annex E (normative) Command response codes . 411 E.1 Overview. 411 E.1.1 General . 411 E.1.2 Response code classifications 411 E.1.3 Reserved values 411 E.1.4

48、Unimplemented command 412 E.1.5 Busy 412 E.2 Response code definitions . 412 E.2.1 General . 412 E.2.2 Value 0 412 E.2.3 Value 1 single-definition error 412 E.2.4 Value 2 single-definition error 412 E.2.5 Value 3 single-definition error 412 E.2.6 Value 4 single-definition error 412 E.2.7 Value 5 sin

49、gle-definition error 412 E.2.8 Value 6 single-definition error 413 E.2.9 Value 7 single-definition error 413 E.2.10 Value 8 multi-definition warning . 413 BS EN 62591:2016 6 IEC 62591:2016 IEC 2016 E.2.11 Value 9 multi-definition error 413 E.2.12 Value 10 multi-definition error 414 E.2.13 Value 11 multi-definition error 414 E.2.14 Value 12 multi-definition error 414 E.2.15 Value 13 multi-definition error 414 E.2.16 Value 14 multi-definition warnin