EN 62621-2016 en Railway applications - Fixed installations - Electric traction - Specific requirements for composite insulators used for overhead contact line systems (Incorporate.pdf

1、BSI Standards PublicationRailway applications Fixed installations Electric traction Specific requirementsfor composite insulators used foroverhead contact line systemsBS EN 62621:2016National forewordThis British Standard is the UK implementation of EN 62621:2016. It is identical to IEC 62621:2011.

2、It supersedes BS EN 50151:2003 which iswithdrawn.The UK participation in its preparation was entrusted by Technical Com-mittee GEL/9, Railway Electrotechnical Applications, to SubcommitteeGEL/9/3, Railway Electrotechnical Applications - Fixed Equipment.A list of organizations represented on this com

3、mittee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 91160 6ICS 29.080.

4、10; 29.280; 45.060.01Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 March 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARD

5、BS EN 62621:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62621 February 2016 ICS 45.060 Supersedes EN 50151:2003 English Version Railway applications - Fixed installations - Electric traction - Specific requirements for composite insulators used for overhead contact line systems (IEC 626

6、21:2011) Applications ferroviaires - Installations fixes - Traction lectrique - Exigences particulires pour les isolateurs composites destins aux rseaux de lignes ariennes de contact (IEC 62621:2011) Bahnanwendungen - Ortsfeste Anlagen - Zugfrderung - Besondere Anforderungen an Verbundisolatoren fr

7、Oberleitungssysteme (IEC 62621:2011) This European Standard was approved by CENELEC on 2015-12-21. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

8、Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by

9、 translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Repub

10、lic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. E

11、uropean Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved world

12、wide for CENELEC Members. Ref. No. EN 62621:2016 E BS EN 62621:2016EN 62621:2016 2 Foreword This document (EN 62621:2016) consists of the text of IEC 62621:2011 prepared by IEC/TC 9 “Electrical equipment and systems for railways“. The following dates are fixed: latest date by which the document has

13、to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-12-21 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-12-21 This document supersedes EN 50151:2003. Attention is drawn to the po

14、ssibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free

15、Trade Association, and supports essential requirements of EU Directive(s). For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this document. Endorsement notice The text of the International Standard IEC 62621:2011 was approved by CENELEC as a European St

16、andard without any modification. BS EN 62621:2016EN 62621:2016 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for

17、its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD

18、applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60587 - Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance

19、to tracking and erosion EN 60587 - IEC/TS 60815-1 2008 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 1: Definitions, information and general principles - - IEC/TS 60815-3 2008 Selection and dimensioning of high-voltage insulators intended for us

20、e in polluted conditions - Part 3: Polymer insulators for a.c. systems - - IEC 60826 - Design criteria of overhead transmission lines - - IEC 60850 2007 1)Railway applications - Supply voltages of traction systems EN 50163 2004 - - + corr. May 2010 - - + AC 2013 - - + A1 2007 IEC 60913 - Railway app

21、lications - Fixed installations - Electric traction overhead contact lines EN 50119 - IEC 61109 2008 Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria EN 61109 2

22、008 1) IEC 60850:2007 is replaced by IEC 60850:2014, Railway applications - Supply voltages of traction systems. BS EN 62621:2016EN 62621:2016 4 Publication Year Title EN/HD Year IEC 61467 2008 Insulators for overhead lines - Insulator strings and sets for lines with a nominal voltage greater than 1

23、 000 V - AC power arc tests EN 61467 2008 IEC 61952 2008 Insulators for overhead lines - Composite line post insulators for A.C. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria EN 61952 2008 IEC 62217 2005 2)Polymeric insulators for indoor and

24、outdoor use with a nominal voltage 1 000 V - General definitions, test methods and acceptance criteria EN 62217 2006 3)- - + corr. December 2006 IEC 62497-1 2010 Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and ele

25、ctronic equipment EN 50124-1 2001 - - + corr. December 2007 - - + corr. May 2010 - - + A1 2003 - - + A2 2005 ISO 34-1 - Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces - - ISO 37 - Rubber, vulcanized or thermoplastic - Determinat

26、ion of tensile stress-strain properties - - 2) IEC 62217:2005 is replaced by IEC 62217:2012, Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria. 3) EN 62217:2006 is replaced by EN 62217:2013, Polymeric HV insulators for indoor and outdoor u

27、se - General definitions, test methods and acceptance criteria (IEC 62217:2012). BS EN 62621:2016EN 62621:2016 5 Annex ZZ (informative) Correspondence between this European Standard and the Essential Requirements of EU Directive 2008/57/EC This European Standard has been prepared under a mandate giv

28、en to CENELEC by the European Union and the European Free Trade Association and within its scope the standard covers all relevant essential requirements as given in Annex lll of the EU Directive 2008/57/EC (also named as New Approach Directive 2008/57/EC Rail Systems: Interoperability). Once this st

29、andard is cited in the Official Journal of the European Union under that Directive and has been implemented as a national standard in at least one Member State, compliance with the clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the

30、 corresponding Essential Requirements of that Directive and associated EFTA regulations. WARNING: Other requirements and other EU Directives may be applicable to the products falling within the scope of this standard. BS EN 62621:2016 2 62621 IEC:2011 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope .

31、 6 2 Normative references 6 3 Terms and definitions . 7 4 Characteristics of composite insulators for overhead contact line systems . 8 4.1 General . 8 4.2 Environmental conditions . 8 4.3 System voltages and frequencies . 9 4.4 Creepage distance . 9 4.5 Mechanical requirements . 10 4.6 Corrosion 11

32、 4.7 Fire safety . 11 4.8 Tracking and erosion . 11 4.9 Arc protection 11 4.10 In-running insulators 12 5 Testing . 12 5.1 General . 12 5.2 Design tests 12 5.3 Type tests . 14 5.3.1 General . 14 5.3.2 Electrical tests . 14 5.3.3 Mechanical tests 14 5.3.4 Verification of dimensions 14 5.4 Sample test

33、s . 15 5.5 Routine tests . 15 6 Identification . 15 7 Transport, storage, installation and maintenance . 15 Annex A (informative) Purchaser requirements . 16 Annex B (informative) Principles of the damage limit, load coordination and testing 17 Annex C (informative) Guidance on non-standard mechanic

34、al stresses and dynamic mechanical loading . 21 Annex D (informative) Determination of the equivalent bending moment caused by combined loads . 23 Bibliography 26 Figure B.1 Load-time strength and damage limit of a core assembled with fittings . 18 Figure B.2 Graphical representation of the relation

35、ship of the damage limit to the mechanical characteristics and service loads of an insulator with a 16 mm diameter core 19 Figure B.3 Test loads . 20 Figure D.1 Combined loads applied to unbraced insulators . 24 Table 1 Definition of relevant mechanical characteristics according to insulator type .

36、10 Table 2 Design tests 13 BS EN 62621:201662621 IEC:2011 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RAILWAY APPLICATIONS FIXED INSTALLATIONS ELECTRIC TRACTION SPECIFIC REQUIREMENTS FOR COMPOSITE INSULATORS USED FOR OVERHEAD CONTACT LINE SYSTEMS FOREWORD 1) The International Electrotechnical Comm

37、ission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and

38、in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee

39、interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordan

40、ce with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all intere

41、sted IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsib

42、le for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence be

43、tween any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of

44、conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

45、members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publicati

46、on or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publicati

47、on may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62621 has been prepared by IEC technical committee 9: Electrical equipment and systems for railways. This standard is based on EN 50151:2003. The text o

48、f this standard is based on the following documents: FDIS Report on voting 9/1539/FDIS 9/1560/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. BS EN 62621:2016 4 62621 IEC:2011 This publication has been drafted in

49、 accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. BS EN 62621:201662621 IEC:2011 5 INTRODUCTION This standard specifies requirements for the design and testing of c