1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 62634:2011Radio data system (RDS) Receiver products andcharacteristics Methods ofmeasurementBS EN 62634:2011 BRITISH STANDARDNational forewordThis British Standard is the U
2、K implementation of EN 62634:2011. It isidentical to IEC 62634:2011. It supersedes BS EN 60315-9:1997 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee EPL/100, Audio, video and multimedia systems and equipment.A list of organizations represented on this
3、 committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011 ISBN 978 0 580 76033 4 ICS 33.060.20 Compliance with a British Standard cannot confer immunity f
4、rom legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2011.Amendments issued since publicationDate T e x t a f f e c t e dBS EN 62634:2011EUROPEAN STANDARD EN 62634 NORME EUROPENNE EUROPISCHE NORM August 2011 CENE
5、LEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwid
6、e for CENELEC members. Ref. No. EN 62634:2011 E ICS 33.060.20 Supersedes EN 60315-9:1996English version Radio data system (RDS) - Receiver products and characteristics - Methods of measurement (IEC 62634:2011) Systme de radiodiffusion de donnes - Caractristiques et mthodes de mesure des rcepteurs RD
7、S (CEI 62634:2011) RDS-Empfnger-Produkte und -Eigenschaften - Messverfahren (IEC 62634:2011) This European Standard was approved by CENELEC on 2011-08-02. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard th
8、e status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, Ge
9、rman). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgar
10、ia, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 62634:
11、2011EN 62634:2011 - 2 - Foreword The text of document 100/1813/FDIS, future edition 1 of IEC 62634, prepared by IEC TC 100, Audio, video and multimedia systems and equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62634 on 2011-08-02. This European Standard
12、supersedes EN 60315-9:1996. EN 62634:2011 includes the following significant technical changes with respect to EN 60315-9:1996: use of state-of-the-art measuring methods based on todays RDS products, provision of realistic performance targets, is complementary to RDS standard EN 62106:2009, it cover
13、s the challenging RDS receiving conditions “weak signal”, “adjacent channel” and “strong signal” to verify the required RDS sensitivity and selectivity for three different RDS product categories. Attention is drawn to the possibility that some of the elements of this document may be the subject of p
14、atent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-05-02 latest da
15、te by which the national standards conflicting with the EN have to be withdrawn (dow) 2014-08-02 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62634:2011 was approved by CENELEC as a European Standard without any modification. In the official ver
16、sion, for Bibliography, the following notes have to be added for the standards indicated: IEC 60315-9:1996 NOTE Harmonized as EN 60315-9:1996 (not modified). ISO 14819 series NOTE Harmonized in EN ISO 14819 series. _ BS EN 62634:2011- 3 - EN 62634:2011 Annex ZA (normative) Normative references to in
17、ternational publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including an
18、y amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 62106 2009 Specification of the Radio Data System (RDS) for VHF/FM sound broadcasting in the frequency range
19、from 87,5 MHz to 108,0 MHzEN 62106 2009 2 62634 IEC:2011 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope . 7 2 Normative references . 7 3 Terms, definitions and abbreviations 7 3.1 Terms and definitions 7 3.2 Abbreviations 8 4 Measuring method 8 4.1 Standard measuring signal 8 4.2 RDS data conditions
20、 9 4.2.1 General . 9 4.2.2 Matching circuit . 9 5 Measurement of the RDS sensitivity . 10 5.1 General . 10 5.2 Method of measurement 10 5.3 Presentation of the results . 10 6 Measurement of the RDS data acquisition 10 6.1 General . 10 6.2 Time to synchronise 10 6.3 Time to detect a first PI . 11 6.4
21、 Method of measurement 11 7 Measurement of the large signal capabilities 11 7.1 General . 11 7.2 Resistance to high wanted signal levels 11 7.2.1 Method of measurement 11 7.2.2 Large wanted signal requirement . 11 7.3 RDS performance at large unwanted signal . 11 7.3.1 Method of measurement 11 7.3.2
22、 Large unwanted signal requirements . 12 8 Measurement of the RDS selectivity . 12 8.1 General . 12 8.2 Method of measurement 12 9 Considerations and guidelines for evaluation of the dynamic RDS performance . 13 9.1 General . 13 9.2 RDS dynamic behaviour 13 9.3 Traffic announcements TA/TP . 14 9.3.1
23、 TA message 14 9.3.2 End of TA message . 14 9.3.3 TP search 14 9.3.4 TA announcement skip 14 9.4 Regionalisation . 15 9.4.1 Implementations 15 9.4.2 Requirement 15 Bibliography 16 62634 IEC:2011 3 Figure 1 Coupling circuit 9 Figure 2 Matching circuits for RDS product devices with three different inp
24、ut impedances 9 Table 1 Presentation of the measurement result 12 Table 2 AF example . 15 4 62634 IEC:2011 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RADIO DATA SYSTEM (RDS) RECEIVER PRODUCTS AND CHARACTERISTICS METHODS OF MEASUREMENT FOREWORD 1) The International Electrotechnical Commission (IEC)
25、is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition t
26、o other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in
27、 the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with condi
28、tions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC Nati
29、onal Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the wa
30、y in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC
31、 Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. I
32、EC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of it
33、s technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any oth
34、er IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the
35、 subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62634 has been prepared by technical area 1: Terminals for audio, video and data services and content, of IEC technical committee 100: Audio, video and multimedia sy
36、stems and equipment. International Standard IEC 62634 cancels and replaces IEC 60315-9, published in 1996, and constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 60315-9: use of state-of-the-art measuring methods based on todays RD
37、S products, provision of realistic performance targets, is complementary to RDS standard IEC 62106 (2009), it covers the challenging RDS receiving conditions “weak signal”, “adjacent channel” and “strong signal” to verify the required RDS sensitivity and selectivity for three different RDS product c
38、ategories. 62634 IEC:2011 5 The text of this standard is based on the following documents: FDIS Report on voting 100/1813/FDIS 100/1850/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been dr
39、afted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publi
40、cation will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 6 62634 IEC:2011 INTRODUCTION This International Standard gives commonly agreed measuring methods to complement the RDS standard IEC 62106 (2009) and the RBDS standard (NRSC-4-A) in the USA. The RDS measuring methods p
41、resented here are directed at all manufacturers of RDS receiver products, and in particular tuner modules with embedded RDS functionality, including TMC (see ISO 14819 series of standards). 62634 IEC:2011 7 RADIO DATA SYSTEM (RDS) RECEIVER PRODUCTS AND CHARACTERISTICS METHODS OF MEASUREMENT 1 Scope
42、This International Standard describes how to measure minimum RDS receiver performance requirements which concern three RDS receiver product categories. However, it should be noted that there are also RDS receiver products on the market that significantly out-perform the minimum RDS receiver performa
43、nce requirements quoted. Methods and algorithms to achieve automatic programme service-following by means of AF lists are, however, very customer- and manufacturer-specific, and are therefore not covered in this standard. 2 Normative references The following referenced documents are indispensable fo
44、r the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 62106:2009, Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the freque
45、ncy range from 87,5 MHz to 108,0 MHz 3 Terms, definitions and abbreviations 3.1 Terms and definitions For the purpose of this document, the following terms and definitions apply. 3.1.1 RDS product category 1 RDS receiver product with high-ohmic input impedance (e.g.for portable devices) 3.1.2 RDS pr
46、oduct category 2 RDS receiver product with 50 input impedance (e.g.car radio optimized for active antenna) 3.1.3 RDS product category 3 RDS receiver product with 75 input impedance (e.g. car radio optimized for rod antenna or home receiver) 3.1.4 RDS reception the signal at which the RDS signal is r
47、eceived with 50 % non-corrected error-free blocks; in practice, the level at which the TP bit is immediately detected 3.1.5 large signal behaviour capability of the RDS receiver to fulfil its function at or in the neighbourhood of strong FM signals 8 62634 IEC:2011 3.1.6 RDS selectivity capability o
48、f the RDS receiver to cope with adjacent signals at both sides of the tuning frequency: 100 kHz, 200 kHz 3.2 Abbreviations For the purpose of this document, the following abbreviations apply. AF Alternative Frequency dBV Signal level in V; 0 dBV = 1 V, 6 dBV = 2 V, 20 dBV = 10 V EON Enhanced Other N
49、etworks information FM Frequency Modulation GUI Graphic User Interface IPR Intellectual Property Rights PI Programme Identification PND Personal Navigation Device PS Programme Service name PTY Programme TYpe RDS Radio Data System RBDS USA Radio Data System1S+100 Unwanted signal, +100 kHz offset from the wanted signal S100 Unwanted signal, 100 kHz offset from the wanted signal TA/TP Traffic Announcement/Traffic Programme TMC Traffic Messag
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1