EN 62656-5-2017 en Standardized product ontology register and transfer by spreadsheets - Part 5 Interface for activity description.pdf

1、Standardized product ontology register and transfer by spreadsheetsPart 5: Interface for activity description (IEC 62656-5:2017)BS EN 62656-5:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62656-5 October 2017

2、 ICS 01.040.01; 01.110 English Version Standardized product ontology register and transfer by spreadsheets - Part 5: Interface for activity description (IEC 62656-5:2017) Enregistrement dontologie de produits normaliss et transfert par tableurs - Partie 5: Interface pour la description des activits

3、(IEC 62656-5:2017) Standardisierte bertragung und Registrierung von Ontologien fr Produkte mittels Tabellen - Teil 5: Schnittstelle fr die Beschreibung von Aktivitten (IEC 62656-5:2017) This European Standard was approved by CENELEC on 2017-07-24. CENELEC members are bound to comply with the CEN/CEN

4、ELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre

5、or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status a

6、s the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Lu

7、xembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische

8、 Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62656-5:2017 E National forewordThis British Standard is the UK implementation of EN 62656-5:2017. It is

9、identical to IEC 62656-5:2017.The UK participation in its preparation was entrusted to Technical Committee GEL/3, Documentation and graphical symbols.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the

10、 necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 86302 8ICS 01.040.01; 01.110Compliance with a British Standard cannot confer immunity from legal obligations.This Briti

11、sh Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 626565:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62656-5 October 2017 ICS 01.040.01; 01

12、.110 English Version Standardized product ontology register and transfer by spreadsheets - Part 5: Interface for activity description (IEC 62656-5:2017) Enregistrement dontologie de produits normaliss et transfert par tableurs - Partie 5: Interface pour la description des activits (IEC 62656-5:2017)

13、 Standardisierte bertragung und Registrierung von Ontologien fr Produkte mittels Tabellen - Teil 5: Schnittstelle fr die Beschreibung von Aktivitten (IEC 62656-5:2017) This European Standard was approved by CENELEC on 2017-07-24. CENELEC members are bound to comply with the CEN/CENELEC Internal Regu

14、lations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC

15、member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official ver

16、sions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, t

17、he Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENEL

18、EC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62656-5:2017 E BS EN 626565:2017EN 62656-5:2017 2 European foreword The text of document 3D/257/CDV, future edition 1 of IE

19、C 62656-5, prepared by SC 3D “Product properties and classes and their identification“, of IEC/TC 3 “Information structures and elements, identification and marking principles, documentation and graphical symbols“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62656-5:2

20、017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-04-24 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-

21、07-24 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62656-5:2017 was approved by

22、CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated : IEC 62656-3:2015 NOTE Harmonized as EN 62656-3:2015 (not modified). BS EN 626565:2017EN 62656-5:2017 2 European foreword The text of doc

23、ument 3D/257/CDV, future edition 1 of IEC 62656-5, prepared by SC 3D “Product properties and classes and their identification“, of IEC/TC 3 “Information structures and elements, identification and marking principles, documentation and graphical symbols“ was submitted to the IEC-CENELEC parallel vote

24、 and approved by CENELEC as EN 62656-5:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-04-24 latest date by which the national standards conflicting with the d

25、ocument have to be withdrawn (dow) 2020-07-24 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International St

26、andard IEC 62656-5:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated : IEC 62656-3:2015 NOTE Harmonized as EN 62656-3:2015 (not modified). EN 62656-5:2017 3 Annex ZA (

27、normative) Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited app

28、lies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of

29、the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61360-2 2012 Standard data element types with associated classification scheme for electric components - Part 2: EXPRESS dictionary schema EN 61360-2 2013 IEC 61360-4 - Standard data

30、element types with associated classification scheme for electric components - Part 4: IEC reference collection of standard data element types and component classes - - IEC 62656-1 - Standardized product ontology register and transfer by spreadsheets - Part 1: Logical structure for data parcels EN 62

31、656-1 - IEC 62264-3 2007 Enterprise-control system integration - Part 3: Activity models of manufacturing operations management EN 62264-3 2007 ISO 13584-24 - Industrial automation systems and integration - Parts library - Part 24: Logical resource: Logical model of supplier library - - ISO 13584-42

32、 2010 Industrial automation systems and integration - Parts library - Part 42: Description methodology: Methodology for structuring parts families - - BS EN 626565:2017This page deliberately left blank 2 IEC 62656-5:2017 IEC 2017 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references 7 3 Terms, defi

33、nitions and abbreviations . 7 3.1 Terms and definitions 7 3.2 Abbreviations 9 4 Overview . 9 4.1 Activity described as an ontology 9 4.2 Use cases and key technical concepts 10 4.3 Relation among properties of different activities 14 4.4 International Concept Identifier (ICID) . 14 5 Basic structure

34、 of the PAM 14 5.1 Activity and arrows 14 5.2 Subactivities . 15 5.2.1 General . 15 5.2.2 Specialized activity 15 5.2.3 Component activity 15 5.3 ICOM representation . 16 5.4 Role of the mechanism (M) in the PAM . 16 5.5 External function call 17 5.6 Basic PAM notation with function symbols 17 5.7 J

35、oining arrows 20 5.8 Forking arrows 21 5.9 Branching or joining of arrows . 21 5.10 Transcendental arrows 22 5.10.1 General . 22 5.10.2 Modelling incoming arrows 24 5.10.3 Modelling outgoing arrows . 24 5.10.4 Modelling connections of arrows at frame boundary . 25 5.10.5 Contracted form of represent

36、ation for branching and joining arrows . 26 5.10.6 Domain or codomain overloading for transcendent arrows . 27 5.11 Extended semantics beyond IDEF0 . 28 5.11.1 Specialized types of activity and its icon 28 5.11.2 Conjunction node . 30 5.11.3 Disjunction node 30 5.11.4 Complementation node 31 5.11.5

37、Selection node . 31 5.11.6 Transformation node 31 5.11.7 Decision tree . 31 5.12 Graphic properties of arrows . 31 5.13 Arrow specialization 31 5.14 Delegated formula interpretation . 32 Annex A (normative) Meta-properties for activity description 34 A.1 General . 34 A.2 List of meta-properties 34 A

38、nnex B (informative) Description examples for the PAM . 37 2 IEC 62656-5:2017 IEC 2017 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references 7 3 Terms, definitions and abbreviations . 7 3.1 Terms and definitions 7 3.2 Abbreviations 9 4 Overview . 9 4.1 Activity described as an ontology 9 4.2 Use ca

39、ses and key technical concepts 10 4.3 Relation among properties of different activities 14 4.4 International Concept Identifier (ICID) . 14 5 Basic structure of the PAM 14 5.1 Activity and arrows 14 5.2 Subactivities . 15 5.2.1 General . 15 5.2.2 Specialized activity 15 5.2.3 Component activity 15 5

40、.3 ICOM representation . 16 5.4 Role of the mechanism (M) in the PAM . 16 5.5 External function call 17 5.6 Basic PAM notation with function symbols 17 5.7 Joining arrows 20 5.8 Forking arrows 21 5.9 Branching or joining of arrows . 21 5.10 Transcendental arrows 22 5.10.1 General . 22 5.10.2 Modelli

41、ng incoming arrows 24 5.10.3 Modelling outgoing arrows . 24 5.10.4 Modelling connections of arrows at frame boundary . 25 5.10.5 Contracted form of representation for branching and joining arrows . 26 5.10.6 Domain or codomain overloading for transcendent arrows . 27 5.11 Extended semantics beyond I

42、DEF0 . 28 5.11.1 Specialized types of activity and its icon 28 5.11.2 Conjunction node . 30 5.11.3 Disjunction node 30 5.11.4 Complementation node 31 5.11.5 Selection node . 31 5.11.6 Transformation node 31 5.11.7 Decision tree . 31 5.12 Graphic properties of arrows . 31 5.13 Arrow specialization 31

43、 5.14 Delegated formula interpretation . 32 Annex A (normative) Meta-properties for activity description 34 A.1 General . 34 A.2 List of meta-properties 34 Annex B (informative) Description examples for the PAM . 37 BS EN 626565:2017IEC 62656-5:2017 IEC 2017 3 B.1 Design product 37 B.2 Sample IDEF0

44、Diagram 48 Annex C (informative) Example PAM data for production operations management . 51 Bibliography 59 Figure 1 See fine arts at Museum 11 Figure 2 Production operations management (extracted from IEC 62264-3) . 12 Figure 3 Production operations management modelled in PAM and depicted as IDEF-0

45、 diagram . 13 Figure 4 Basic activity and its subcomponents . 16 Figure 5 Corresponding IDEF0 diagram for basic PAM notation . 18 Figure 6 Sample activity drawing in IDEF0 and ICOM 19 Figure 7 Subactivities and arrows 19 Figure 8 Joining arrow example . 20 Figure 9 Forking arrow example . 22 Figure

46、10 Transcendental arrows to be taken over by child nodes . 23 Figure 11 Transcendental arrows from the parent node . 23 Figure 12 IDEF0 extension for specialized activity node in the PAM . 29 Figure 13 An implementation example of Conjunction node in the PAM . 30 Figure 14 Super relation and its app

47、lication for specialized activity 32 Figure B.1 Class meta-class example of the PAM for “design product” activity 38 Figure B.2 Property meta-class example of the PAM for “design product” activity . 40 Figure B.3 Relation meta-class example of the PAM for “design product” activity 42 Figure B.4 IDEF

48、0 diagram image corresponding to A-0 (frame containing A0) . 49 Figure B.5 IDEF0 diagram image corresponding to A0 (frame containing subactivities of A0) . 50 Figure C.1 Class meta-class example for production operations management defined in IEC 62264-3 52 Figure C.2 Property meta-class example for

49、 production operations management defined in IEC 62264-3 . 53 Figure C.3 Relation meta-class example for production operations management defined in IEC 62264-3 54 Figure C.4 Autogenerated IDEF 0 A-0 (top) node for production operations management defined in IEC 62264-3 57 Figure C.5 Autogenerated IDEF A0 node for production operations management defined in IEC 62264-3 . 58 Table 1 Basic PAM notation for arrows 18 Table 2 Extracts of relation meta-class definitions fo