EN 62680-1-1-2015 en Universal Serial Bus interfaces for data and power - Part 1-1 Universal Serial Bus interfaces - Common components - USB Battery Charging Specification Revision.pdf

1、BSI Standards PublicationUniversal Serial Bus interfaces for data and powerPart 1-1: Universal Serial Bus interfaces Common components USB Battery ChargingSpecification, Revision 1.2 (TA 14)BS EN 62680-1-1:2015National forewordT h i s B r i t i s h S t a n d a r d i s t h e U K i m p l e m e n t a t

2、 i o n o f E N 6 2 6 8 0 - 1 - 1 : 2 0 15. I t i si d e n t i c a l t o I E C 6 2 6 8 0 - 1 - 1 : 2 0 1 5 . The UK participation in its preparation was entrusted to TechnicalCommittee EPL/100, Audio, video and multimedia systems and equipment.A list of organizations represented on this committee can

3、 be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 88003 2ICS 29.220; 33.120; 3

4、5.200Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 29 February 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62680-1

5、-1:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62680-1-1 December 2015 ICS 29.220; 33.120; 35.200 English Version Universal Serial Bus interfaces for data and power - Part 1-1: Universal Serial Bus interfaces - Common components - USB Battery Charging Specification, Revision 1.2 (TA 14)

6、 (IEC 62680-1-1:2015) Interfaces de bus universel en srie pour les donnes et lalimentation lectrique - Partie 1-1 : interfaces de bus universel en srie - Composants communs - Spcification de chargement des batteries USB, rvision 1.2 (TA 14) (IEC 62680-1-1:2015) Schnittstellen des Universellen Seriel

7、len Busses fr Daten und Energie - Teil 1-1: Gemeinsame Bauteile - Festlegung fr den USB-Batterie-Ladevorgang, berarbeitung 1.2 (IEC 62680-1-1:2015) This European Standard was approved by CENELEC on 2015-10-14. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipul

8、ate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This Europea

9、n Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC membe

10、rs are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norw

11、ay, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue

12、 Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62680-1-1:2015 E BS EN 62680-1-1:2015EN 62680-1-1:2015 2 European foreword The text of document 100/2330/CDV, future edition 1 of IEC 62680-1-1, prepar

13、ed by Technical Area 14 “Interfaces and methods of measurement for personal computing equipment“ of IEC/TC 100“Audio, video and multimedia systems and equipment“ was submitted to the IEC-CENELEC parallelvote and approved by CENELEC as EN 62680-1-1:2015. The following dates are fixed: latest date by

14、which the document has to beimplemented at national level bypublication of an identical nationalstandard or by endorsement(dop) 2016-07-14 latest date by which the nationalstandards conflicting with thedocument have to be withdrawn(dow) 2018-10-14 Attention is drawn to the possibility that some of t

15、he elements of this document may be the subject ofpatent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all suchpatent rights. Endorsement notice The text of the International Standard IEC 62680-1-1:2015 was approved by CENELEC as aEuropean Standard without any modif

16、ication. BS EN 62680-1-1:2015 2 IEC 62680-1-1:2015 IEC 2015 USB-IF 2014 INTERNATIONAL ELECTROTECHNICAL COMMISSION_ UNIVERSAL SERIAL BUS INTERFACES FOR DATA AND POWER Part 1-1: Common components USB Battery Charging Specification, Revision 1.2 FOREWORD 1) The International Electrotechnical Commission

17、 (IEC) is a worldwide organization for standardization comprisingall national electrotechnical committees (IEC National Committees). The object of IEC is to promoteinternational co-operation on all questions concerning standardization in the electrical and electronic fields. Tothis end and in additi

18、on to other activities, IEC publishes International Standards, Technical Specifications,Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IECPublication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interestedi

19、n the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closelywith the International Organization for Standardization (ISO) in accordance with condi

20、tions determined byagreement between the two organizations.2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an internationalconsensus of opinion on the relevant subjects since each technical committee has representation from allinterested IEC National

21、 Committees.3) IEC Publications have the form of recommendations for international use and are accepted by IEC NationalCommittees in that sense. While all reasonable efforts are made to ensure that the technical content of IECPublications is accurate, IEC cannot be held responsible for the way in wh

22、ich they are used or for anymisinterpretation by any end user.4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publicationstransparently to the maximum extent possible in their national and regional publications. Any divergencebetween any IEC Publicatio

23、n and the corresponding national or regional publication shall be clearly indicated inthe latter.5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformityassessment services and, in some areas, access to IEC marks of conformity. IEC is not resp

24、onsible for anyservices carried out by independent certification bodies.6) All users should ensure that they have the latest edition of this publication.7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts andmembers of its technical commit

25、tees and IEC National Committees for any personal injury, property damage orother damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) andexpenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IECPublications.8

26、) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications isindispensable for the correct application of this publication.9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject ofpatent rights

27、. IEC shall not be held responsible for identifying any or all such patent rights.International Standard IEC 62680-1-1 has been prepared by technical area 14: Interfaces and methods of measurement for personal computing equipment, of IEC technical committee 100: Audio, video and multimedia systems a

28、nd equipment. The text of this standard is based on documents prepared by the USB Implementers Forum (USB-IF). The structure and editorial rules used in this publication reflect the practice of the organization which submitted it. BS EN 62680-1-1:2015IEC 62680-1-1:2015 IEC 2015 3 USB-IF 2014 The tex

29、t of this standard is based on the following documents: CDV Report on voting 100/2330/CDV 100/2433/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. A list of all the parts in the IEC 62680 series, published under

30、the general title Universal serial bus interfaces for data and power can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the s

31、pecific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colou

32、rs which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. BS EN 62680-1-1:2015 4 IEC 62680-1-1:2015 IEC 2015 USB-IF 2014 INTRODUCTION The IEC 62680 series is based on a series of specifications that were ori

33、ginally developed by the USB Implementers Forum (USB-IF). These specifications were submitted to the IEC under the auspices of a special agreement between the IEC and the USB-IF. The USB Implementers Forum, Inc.(USB-IF) is a non-profit corporation founded by the group of companies that developed the

34、 Universal Serial Bus specification. The USB-IF was formed to provide a support organization and forum for the advancement and adoption of Universal Serial Bus technology. The Forum facilitates the development of high-quality compatible USB peripherals (devices), and promotes the benefits of USB and

35、 the quality of products that have passed compliance testing. ANY USB SPECIFICATIONS ARE PROVIDED TO YOU “AS IS, “WITH NO WARRANTIES WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE. THE USB IMPLEMENTERS FORUM AND THE AUTHORS OF ANY USB S

36、PECIFICATIONS DISCLAIM ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PROPRIETARY RIGHTS, RELATING TO USE OR IMPLEMENTATION OR INFORMATION IN THIS SPECIFICAITON. THE PROVISION OF ANY USB SPECIFICATIONS TO YOU DOES NOT PROVIDE YOU WITH ANY LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHER

37、WISE, TO ANY INTELLECTUAL PROPERTY RIGHTS. Entering into USB Adopters Agreements may, however, allow a signing company to participate in a reciprocal, royalty-free licensing arrangement for compliant products. For more information, please see: http:/www.usb.org/developers/docs/ http:/www.usb.org/dev

38、elopers/devclass_docs#approved IEC DOES NOT TAKE ANY POSITION AS TO WHETHER IT IS ADVISABLE FOR YOU TO ENTER INTO ANY USB ADOPTERS AGREEMENTS OR TO PARTICIPATE IN THE USB IMPLEMENTERS FORUM.” This series covers the Universal Series Bus interfaces for data and power and consists of the following part

39、s: IEC 62680-1-1, Universal Serial Bus interfaces for data and power Part 1-1: Common components USB Battery Charging Specification, Revision 1.2 IEC 62680-2-1, Universal Serial Bus interfaces for data and power Part 2-1: Universal Serial Bus Specification, Revision 2.0 IEC 62680-2-2, Universal Seri

40、al Bus interfaces for data and power Part 2-2: USB Micro-USB Cables and Connectors Specification, Revision 1.01 IEC 62680-2-3, Universal Serial Bus interfaces for data and power Part 2-3: Universal Serial Bus Cables and Connectors Class Document Revision 2.0 This part of the IEC 62680 series consist

41、s of several distinct parts: the main body of the text, which consists of the original specification and all ECN and Errata developed by the USB-IF. BS EN 62680-1-1:2015IEC 62680-1-1:2015 IEC 2015 5 USB-IF 2014 CONTENTS FOREWORD . 2 INTRODUCTION . 4 1 Introduction . 13 1.1 Scope . 13 1.2 Background.

42、 13 1.3 Reference Documents . 13 1.4 Definitions of Terms 14 1.4.1 Accessory Charger Adaptor . 14 1.4.2 ACA-Dock 14 1.4.3 Attach versus Connect . 14 1.4.4 Charging Downstream Port 14 1.4.5 Charging Port 14 1.4.6 Dead Battery Threshold . 14 1.4.7 Dedicated Charging Port 15 1.4.8 Downstream Port . 15

43、1.4.9 Micro ACA . 15 1.4.10 Portable Device . 15 1.4.11 Rated Current 15 1.4.12 Standard ACA 15 1.4.13 Standard Downstream Port 15 1.4.14 USB Charger . 15 1.4.15 Weak Battery Threshold 15 1.5 Parameter Values . 16 1.6 OTG Considerations . 16 1.7 Super Speed Considerations . 16 2 Dead Battery Provisi

44、on 16 2.1 Background. 16 2.2 DBP Unconfigured Clause 16 2.3 DBP Configured Clause . 17 3 Charging Port Detection 18 3.1 Overview. 18 3.2 Charger Detection Hardware . 19 3.2.1 Overview . 19 3.2.2 VBUS Detect . 20 3.2.3 Data Contact Detect 20 3.2.4 Primary Detection 23 3.2.5 Secondary Detection . 30 3

45、.2.6 ACA Detection . 32 3.3 Charger Detection Algorithms . 34 3.3.1 Weak Battery Algorithm . 34 3.3.2 Good Battery Algorithm . 35 3.4 Charger Detection Timing . 36 3.4.1 Data Contact Detect Timing . 36 3.4.2 Detection Timing, CDP 38 3.5 Ground Current and Noise Margins . 40 4 Charging Port and Porta

46、ble Device Requirements . 40 BS EN 62680-1-1:2015 6 IEC 62680-1-1:2015 IEC 2015 USB-IF 2014 4.1 Charging Port Requirements . 40 4.1.1 Overshoot 40 4.1.2 Maximum Current 40 4.1.3 Detection Renegotiation 40 4.1.4 Shutdown Operation 41 4.1.5 Failure Voltage 41 4.1.6 Multiple Ports 41 4.2 Charging Downs

47、tream Port . 41 4.2.1 Required Operating Range 41 4.2.2 Shutdown Operation 42 4.2.3 Undershoot 42 4.2.4 Detection Signaling 42 4.2.5 Connector 43 4.3 ACA-Dock . 43 4.3.1 Required Operating Range 43 4.3.2 Undershoot 43 4.3.3 Detection Signaling 43 4.3.4 Connector 43 4.4 Dedicated Charging Port . 43 4

48、.4.1 Required Operating Range 43 4.4.2 Undershoot 44 4.4.3 Detection Signaling 44 4.4.4 Connector 44 4.5 Accessory Charger Adapter 45 4.5.1 Required Operating Range 45 4.5.2 Undershoot 45 4.5.3 Detection Signaling 45 4.5.4 Connector 45 4.6 Portable Device 45 4.6.1 Allowed Operating Range 45 4.6.2 De

49、tection Signaling 46 4.6.3 Detection Renegotiation 46 4.6.4 Connector 47 5 Parameter Values 47 6 Accessory Charger Adapter . 50 6.1 Introduction . 50 6.2 Micro ACA 52 6.2.1 Micro ACA Ports 52 6.2.2 Micro ACA Connectivity Options 53 6.2.3 Micro ACA Architecture 53 6.2.4 Micro ACA Modes of Operation 54 6.2.5 Implications of not Supporting Micro ACA Detection 56 6.2.6 Micro ACA Requirements . 56 6.2.7 Portable Device State Diagram 57 6.3 Standard ACA . 59 6.3.1 Standard ACA Po