1、BSI Standards PublicationLow-voltage switchgear and controlgear Product data and properties for information exchangeBS EN 62683:2015National forewordThis British Standard is the UK implementation of EN 62683:2015. It is identical to IEC 62683:2015. It supersedes BS EN 62683:2013 which is withdrawn.T
2、he UK participation in its preparation was entrusted by TechnicalCommittee PEL/121, Switchgear and Controlgear and their assemblies forlow voltage, to Subcommittee PEL/121/1, Low voltage switchgear and controlgear.A list of organizations represented on this committee can be obtained onrequest to its
3、 secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 84789 9ICS 29.130.20Compliance with a British Standard ca
4、nnot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 December 2015.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62683:2015EUROPEAN STANDARD NORME EUROPENNE EUROP
5、ISCHE NORM EN 62683 November 2015 ICS 29.130.20 Supersedes EN 62683:2013 English Version Low-voltage switchgear and controlgear - Product data and properties for information exchange (IEC 62683:2015) Appareillage basse tension - Donnes et proprits de produits pour lchange dinformations (IEC 62683:20
6、15) Niederspannungsschaltgerte - Produktdaten und -eigenschaften fr den Informationsaustausch (IEC 62683:2015) This European Standard was approved by CENELEC on 2015-10-02. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Eu
7、ropean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official v
8、ersions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical
9、committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovak
10、ia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENE
11、LEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62683:2015 E BS EN 62683:2015EN 62683:2015 2 European foreword The text of document 121A/47/FDIS, future edition 2 of IEC 62683, prepared by SC 121A “Low-voltage switchgear and controlgear
12、“ of IEC/TC 121 “Switchgear and controlgear and their assemblies for low voltage“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62683:2015. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an ide
13、ntical national standard or by endorsement (dop) 2016-07-02 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-10-02 This document supersedes EN 62683:2013. Attention is drawn to the possibility that some of the elements of this document may be
14、the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62683:2015 was approved by CENELEC as a European Standard without any modification. In the official version, for
15、 Bibliography, the following notes have to be added for the standards indicated: IEC 60127-1 NOTE Harmonized as EN 60127-1. IEC 60715 NOTE Harmonized as EN 60715. IEC 60947-2:2006 NOTE Harmonized as EN 60947-2:2006 (not modified). IEC 60947-3 NOTE Harmonized as EN 60947-3. IEC 60947-4-1:2009 and A1:
16、2012 NOTE Harmonized as EN 60947-4-1:2010 (not modified) and as EN 60947-4-1:2010/A1:2012 (not modified). IEC 60947-4-2:2011 NOTE Harmonized as EN 60947-4-2:2012 (not modified). IEC 60947-4-3 NOTE Harmonized as EN 60947-4-3. IEC 60947-5-1:2003 NOTE Harmonized as EN 60947-5-1:2004 (not modified). IEC
17、 60947-5-2:2007 NOTE Harmonized as EN 60947-5-2:2007 (not modified). IEC 60947-5-4 NOTE Harmonized as EN 60947-5-4. BS EN 62683:2015EN 62683:2015 3 IEC 60947-6-1:2005 NOTE Harmonized as EN 60947-6-1:2005 (not modified). IEC 60947-6-2 NOTE Harmonized as EN 60947-6-2. IEC 60947-7-1:2009 NOTE Harmonize
18、d as EN 60947-7-1:2009 (not modified). IEC 60947-7-2:2009 NOTE Harmonized as EN 60947-7-2:2009 (not modified). IEC 60947-7-3:2009 NOTE Harmonized as EN 60947-7-3:2009 (not modified). IEC 60947-8 NOTE Harmonized as EN 60947-8. IEC 60999-1:1999 NOTE Harmonized as EN 60999-1:2000 (not modified). IEC 61
19、058-1:2000 NOTE Harmonized as EN 61058-1:2002 (modified). IEC 61095 NOTE Harmonized as EN 61095. IEC 61140:2001 NOTE Harmonized as EN 61140:2002 (not modified). IEC 61672-1:2013 NOTE Harmonized as EN 61672-1:2013 (not modified). IEC 61987-10 NOTE Harmonized as EN 61987-10. IEC 62262:2002 NOTE Harmon
20、ized as EN 62262:2002 (not modified). IEC 82079-1:2012 NOTE Harmonized as EN 82079-1:2012 (not modified). ISO 13850:2006 NOTE Harmonized as EN ISO 13850:2008 (not modified). ISO 14025 NOTE Harmonized as EN ISO 14025. BS EN 62683:2015EN 62683:2015 4 Annex ZA (normative) Normative references to intern
21、ational publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of
22、 the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is avai
23、lable here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60529 1989 Degrees of protection provided by enclosures (IP Code) EN 60529 1991 - - + corrigendum May 1993 IEC 60947-1 2007 Low-voltage switchgear and controlgear - Part 1: General rules EN 60947-1 2007 + A1 2010 + A1 2011 + A2 2014 +
24、 A2 2014 IEC 61360-1 - Standard data elements types with associated classification scheme for electric items - Part 1: Definitions - Principles and methods EN 61360-1 - BS EN 62683:2015 2 IEC 62683:2015 IEC 2015 CONTENTS FOREWORD . 5 INTRODUCTION . 7 1 Scope 9 2 Normative references 9 3 Terms and de
25、finitions 9 4 General . 10 5 Properties 10 5.1 Criteria for naming properties 10 5.2 Attributes of a property . 10 6 Block of properties . 11 7 Device classes 12 7.1 Device class attributes 12 7.2 Classification of low-voltage switchgear and controlgear . 12 7.3 Properties of device classes . 18 7.3
26、.1 General . 18 7.3.2 Circuit-breaker . 19 7.3.3 Release for circuit-breaker . 21 7.3.4 Residual current release for circuit-breaker . 22 7.3.5 Shunt release for circuit-breaker 23 7.3.6 Under-voltage release for circuit-breaker . 24 7.3.7 Motor-operator for circuit-breaker 25 7.3.8 Switch-disconnec
27、tor. 26 7.3.9 Switch-disconnector-fuse . 28 7.3.10 Fuse-switch-disconnector 30 7.3.11 Motor protection circuit-breaker . 32 7.3.12 Motor management device . 33 7.3.13 Motor management device, extension module 34 7.3.14 Motor management device, operator panel 36 7.3.15 Motor-starter combination 37 7.
28、3.16 Motor-starter 38 7.3.17 AC semiconductor motor controller 39 7.3.18 Power contactor, a.c. switching . 41 7.3.19 Capacitor contactor . 42 7.3.20 Combination of contactors . 43 7.3.21 Power contactor, d.c. switching . 44 7.3.22 Thermal overload relay 45 7.3.23 Electronic overload relay . 46 7.3.2
29、4 Relay for thermistor protection (PTC). 47 7.3.25 Electromechanical contactor for household and similar purposes . 48 7.3.26 Inductive proximity switch 49 7.3.27 Capacitive proximity switch 50 7.3.28 Non-mechanical magnetic proximity switch 51 7.3.29 Ultrasonic proximity switch 51 7.3.30 Through be
30、am photoelectric proximity switch . 51 7.3.31 Retroreflective photoelectric proximity switch. 51 BS EN 62683:2015IEC 62683:2015 IEC 2015 3 7.3.32 Diffuse reflective photoelectric proximity switch . 51 7.3.33 Diffuse reflective photoelectric proximity switch with background suppression . 51 7.3.34 Au
31、xiliary contact block . 52 7.3.35 Contactor relay 53 7.3.36 Position switch. 54 7.3.37 Rotary limit switch . 55 7.3.38 Safety position switch with separate actuator . 55 7.3.39 Safety position switch with interlocking 55 7.3.40 Trip wire switch . 55 7.3.41 Hinge switch 55 7.3.42 Push-button . 56 7.3
32、.43 Rotary button . 58 7.3.44 Front element for rotary button 60 7.3.45 Joy stick 60 7.3.46 Foot switch 61 7.3.47 Emergency stop push-button . 61 7.3.48 Indicator light . 63 7.3.49 Indicating tower . 64 7.3.50 Front element for push-button 65 7.3.51 Contact block for control circuit 66 7.3.52 Front
33、element for emergency stop push-button 67 7.3.53 Module for indicating tower 68 7.3.54 Transfer switching equipment 68 7.3.55 Feed-through terminal block 69 7.3.56 Disconnect terminal block 70 7.3.57 Protective conductor terminal block . 71 7.3.58 Fuse terminal block . 72 8 Device properties 73 Bibl
34、iography 107 Figure 1 Height of the device . 103 Figure 2 Width of the device 104 Figure 3 Length of the device . 104 Table 1 Library of blocks used in the device classes of low-voltage switchgear 11 Table 2 Low-voltage switchgear and controlgear classification . 12 Table 3 Circuit-breaker 19 Table
35、4 Release for circuit-breaker 21 Table 5 Residual current release for circuit-breaker . 22 Table 6 Shunt release for circuit-breaker . 23 Table 7 Under-voltage release for circuit-breaker . 24 Table 8 Motor-operator for circuit-breaker 25 Table 9 Switch-disconnector 26 Table 10 Switch-disconnector-f
36、use 28 Table 11 Fuse-switch-disconnector 30 Table 12 Motor protection circuit-breaker . 32 BS EN 62683:2015 4 IEC 62683:2015 IEC 2015 Table 13 Motor management device 33 Table 14 Motor management device, extension module . 34 Table 15 Motor management device, operator panel 36 Table 16 Motor-starter
37、 combination 37 Table 17 Motor-starter . 38 Table 18 AC semiconductor motor controller 39 Table 19 Power contactor, a.c. switching . 41 Table 20 Capacitor contactor . 42 Table 21 Combination of contactors . 43 Table 22 Power contactor, d.c. switching . 44 Table 23 Thermal overload relay 45 Table 24
38、Electronic overload relay . 46 Table 25 Relay for thermistor protection (PTC) 47 Table 26 Electromechanical contactor for household and similar purposes 48 Table 27 Inductive proximity switch 49 Table 28 Capacitive proximity switch . 50 Table 29 Auxiliary contact block . 52 Table 30 Contactor relay
39、53 Table 31 Position switch 54 Table 32 Push-button . 56 Table 33 Rotary button 58 Table 34 Front element for rotary button 60 Table 35 Emergency stop push-button . 61 Table 36 Indicator light 63 Table 37 Indicating tower . 64 Table 38 Front element for push-button . 65 Table 39 Contact block for co
40、ntrol circuit . 66 Table 40 Front element for emergency stop push-button 67 Table 41 Module for indicating tower 68 Table 42 Feed-through terminal block 69 Table 43 Disconnect terminal block 70 Table 44 Protective conductor terminal block . 71 Table 45 Fuse terminal block . 72 Table 46 Library of pr
41、operties used in the device classes 73 Table 47 Value lists of properties . 104 BS EN 62683:2015IEC 62683:2015 IEC 2015 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR PRODUCT DATA AND PROPERTIES FOR INFORMATION EXCHANGE FOREWORD 1) The International Electrotechn
42、ical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this
43、 end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National C
44、ommittee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in
45、 accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from a
46、ll interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held
47、responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any dive
48、rgence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC
49、marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or othe
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1