EN 62769-101-2-2015 en Field Device Integration (FDI) - Part 101-2 Profiles - Foundation Fieldbus HSE.pdf

1、BSI Standards PublicationField Device Integration (FDI)Part 101-2: Profiles Foundation Fieldbus HSEBS EN 62769-101-2:2015National forewordThis British Standard is the UK implementation of EN 62769-101-2:2015. Itis identical to IEC 62769-101-2:2015.The UK participation in its preparation was entruste

2、d to TechnicalCommittee AMT/7, Industrial communications: process measurement andcontrol, including fieldbus.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users

3、are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 82582 8ICS 25.040.40; 35.100Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authorit

4、y of theStandards Policy and Strategy Committee on 31 July 2015.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62769-101-2:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62769-101-2 July 2015 ICS 25.040.40; 35.100 English Version Field Device Integrat

5、ion (FDI) - Part 101-2: Profiles - Foundation Fieldbus HSE (IEC 62769-101-2:2015) Intgration des appareils de terrain (FDI) - Partie 101-2: Profils - Foundation Fieldbus HSE (IEC 62769-101-2:2015) Feldgerteintegration (FDI) - Profile - Teil 101-2: Foundation Fieldbus HSE (IEC 62769-101-2:2015) This

6、European Standard was approved by CENELEC on 2015-06-23. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical refer

7、ences concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a

8、 CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yug

9、oslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Sta

10、ndardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 6276

11、9-101-2:2015 E BS EN 62769-101-2:2015EN 62769-101-2:2015 2 Foreword The text of document 65E/353/CDV, future edition 1 of IEC 62769-101-2, prepared by SC 65E “Devices and integration in enterprise systems“, of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to the IE

12、C-CENELEC parallel vote and approved by CENELEC as EN 62769-101-2:2015. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-03-23 latest date by which the national stand

13、ards conflicting with the document have to be withdrawn (dow) 2018-06-23 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement n

14、otice The text of the International Standard IEC 62769-101-2:2015 was approved by CENELEC as a European Standard without any modification. BS EN 62769-101-2:2015EN 62769-101-2:2015 3 Annex ZA (normative) Normative references to international publications with their corresponding European publication

15、s The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE

16、1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC

17、61784-1 - Industrial communication networks - Profiles - Part 1: Fieldbus profiles EN 61784-1 - IEC 61784-2 - Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 EN 61784-2 - IEC 61804 series Function Blocks (FB) for proc

18、ess control EN 61804 series IEC 62541-100 2015 OPC unified architecture - Part 100: Device Interface EN 62541-100 2015 IEC 62769-2 - Field Device Integration (FDI) - Part 2: FDI Client - - IEC 62769-3 - Field Device Integration (FDI) - Part 3: FDI Server - - IEC 62769-4 - Field Device Integration (F

19、DI) - Part 4: FDI Packages - - IEC 62769-5 - Field Device Integration (FDI) - Part 5: FDI Information Model - - IEC 62769-6 - Field Device Integration (FDI) - Part 6: FDI Technology Mapping - - IEC 62769-7 - Field Device Integration (FDI) - Part 7: FDI Communication Devices - - IEC 62769-101-1 - Fie

20、ld Device Integration (FDI) - Part 101-1: Profiles - Foundation Fieldbus H1 - - BS EN 62769-101-2:2015 2 IEC 62769-101-2:2015 IEC 2015 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms, definitions, abbreviated terms and acronyms . 8 3.1 Terms and definitions 8 3.2 Ab

21、breviated terms and acronyms 8 4 Conventions 8 4.1 EDDL syntax . 8 4.2 XML syntax . 8 5 Profile for CP 1/2 (FOUNDATION HSE) . 8 5.1 General . 8 5.2 Catalog profile 8 5.2.1 Protocol support files . 8 5.2.2 CommunicationProfile definition . 9 5.2.3 Profile device . 9 5.2.4 Protocol version information

22、 9 5.3 Associating a Package with a CP 1/2 device . 9 5.3.1 Device type identification mapping . 9 5.3.2 Device type revision mapping 10 5.4 Information Model mapping . 10 5.4.1 ProtocolType definition 10 5.4.2 DeviceType mapping . 10 5.4.3 FunctionalGroup Identification definition 10 5.4.4 BlockTyp

23、e property mapping . 11 5.4.5 Mapping to Block ParameterSet . 11 5.5 Topology elements 11 5.5.1 ConnectionPoint definition . 11 5.5.2 Communication Device definition . 13 5.5.3 Communication service provider definition . 14 5.5.4 Network definition 15 5.6 Methods 15 5.6.1 Methods for FDI Communicati

24、on Servers . 15 5.6.2 Methods for Gateways . 22 Annex A (normative) Topology scan schema 23 A.1 General . 23 A.2 Network 23 A.3 FoundationHSEAddressT 23 A.4 FoundationHSEConnectionPointT . 23 A.5 FoundationHSENetworkT 24 A.6 FoundationBlockIdentificationT . 24 A.7 FoundationIdentificationT 25 Annex

25、B (normative) Transfer service parameters 27 Annex C (informative) Communication service arguments for Transfer Method 28 Bibliography 29 BS EN 62769-101-2:2015IEC 62769-101-2:2015 IEC 2015 3 Table 1 Capability File part 9 Table 2 CommunicationProfile definition 9 Table 3 Device type catalog mapping

26、 . 9 Table 4 ProtocolType Foundation_HSE definition 10 Table 5 Inherited DeviceType property mapping 10 Table 6 Identification parameters . 11 Table 7 Inherited BlockType property mapping. 11 Table 8 ConnectionPointType ConnectionPoint_Foundation_HSE definition. 12 Table 9 Communication device Param

27、eterSet definition . 14 Table 10 Method Connect arguments . 16 Table 11 Method Disconect arguments 17 Table 12 Method Transfer arguments . 18 Table 13 Method GetPublishedData arguments 20 Table 14 Method SetAddress arguments 21 Table A.1 Attributes of FoundationHSEConnectionPointT 24 Table A.2 Eleme

28、nts of FoundationHSEConnectionPointT . 24 Table A.3 Elements of FoundationHSENetworkT 24 Table A.4 Attributes of FoundationBlockIdentificationT. 25 Table A.5 Attributes of FoundationIdentificationT . 26 BS EN 62769-101-2:2015 4 IEC 62769-101-2:2015 IEC 2015 INTERNATIONAL ELECTROTECHNICAL COMMISSION

29、_ FIELD DEVICE INTEGRATION (FDI) Part 101-2: Profiles Foundation Fieldbus HSE FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

30、 international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (he

31、reafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also pa

32、rticipate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible,

33、 an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While a

34、ll reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to a

35、pply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation o

36、f conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this p

37、ublication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indire

38、ct, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the

39、correct application of this publication. International Standard IEC 62769-101-2 has been prepared by subcommittee 65E: Devices and integration in enterprise systems, of IEC technical committee 65: Industrial-process measurement, control and automation. The text of this standard is based on the follo

40、wing documents: CDV Report on voting 65E/353/CDV 65E/416/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in

41、 the IEC 62769 series, published under the general title Field Device Integration (FDI), can be found on the IEC website. BS EN 62769-101-2:2015IEC 62769-101-2:2015 IEC 2015 5 The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on

42、the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. BS EN 62769-101-2:2015 6 IEC 62769-101-2:2015 IEC 2015 INTRODUCTION The International Electrotechnic

43、al Commission (IEC) draws attention to the fact that it is claimed that compliance with this document may involve the use of patents concerning a) Method for the Supplying and Installation of Device-Specific Functionalities, see Patent Family DE10357276; b) Method and device for accessing a function

44、al module of automation system, see Patent Family EP2182418; c) Methods and apparatus to reduce memory requirements for process control system software applications, see Patent Family US2013232186 ; d) Extensible Device Object Model, see Patent Family US12/893,680. IEC takes no position concerning t

45、he evidence, validity and scope of this patent right. The holders of these patent rights have assured the IEC that he/she is willing to negotiate licences either free of charge or under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the

46、statement of the holder of this patent right is registered with IEC. Information may be obtained from: a) ABB Research Ltd Claes Rytoft Affolterstrasse 4 Zurich, 8050 Switzerland b) Phoenix Contact GmbH therefore the browse name of each LIST in the LIST_ITEMS is the item name of the list. 5.5 Topolo

47、gy elements 5.5.1 ConnectionPoint definition The ConnectionPoint type ConnectionPoint_Foundation_HSE shall be used to identify CP 1/2 network communication and is defined in Table 8. The ConnectionPoint_Foundation_HSE type is a sub type of the abstract type ConnectionPointType defined in IEC 62541-1

48、00. BS EN 62769-101-2:2015 12 IEC 62769-101-2:2015 IEC 2015 The Address property can be an IPv4 or IPv6 address. For IPv4 addresses, the address shall be stored in the last 4 octets and all other octets shall be set to zero. The OrdinalNumber property reflects the position of the VFD within the SMIB

49、 VFD list. For devices exposing multiple FB VFDs the OrdinalNumber property is mandatory to address the FB VFD. For devices with a single FB VFD the OrdinalNumber property can be omitted. Devices exposed as instances of type DeviceType define their Connection points as components. Hence Devices with multiple FB VFDs shall contain multiple Connection points, one per FB VFD. Table 8 ConnectionPointType ConnectionPoint_Foundation_HSE definition Attribu