EN 62769-109-1-2015 en Field Device Integration (FDI) - Part 109-1 Profiles - HART(r) and WirelessHART(r).pdf

1、BSI Standards PublicationField Device Integration (FDI)Part 109-1: Profiles HART(r) and WirelessHART(r)BS EN 62769-109-1:2015National forewordThis British Standard is the UK implementation of EN 62769-109-1:2015. Itis identical to IEC 62769-109-1:2015.The UK participation in its preparation was entr

2、usted to TechnicalCommittee AMT/7, Industrial communications: process measurement andcontrol, including fieldbus.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Us

3、ers are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 82592 7ICS 25.040.40; 35.100Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the auth

4、ority of theStandards Policy and Strategy Committee on 31 July 2015.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62769-109-1:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62769-109-1 July 2015 ICS 25.040.40; 35.100 English Version Field Device Inte

5、gration (FDI) - Part 109-1: Profiles - HART(r) and WirelessHART(r) (IEC 62769-109-1:2015) Intgration des appareils de terrain (FDI) - Partie 109-1: Profils - HART(r) et WirelessHART(r) (IEC 62769-109-1:2015) Feldgerteintegration (FDI) - Profile - Teil 109-1: HART(r) und WirelessHART(r) (IEC 62769-10

6、9-1:2015) This European Standard was approved by CENELEC on 2015-06-23. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and biblio

7、graphical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the resp

8、onsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finl

9、and, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Elect

10、rotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. R

11、ef. No. EN 62769-109-1:2015 E BS EN 62769-109-1:2015EN 62769-109-1:2015 2 Foreword The text of document 65E/356/CDV, future edition 1 of IEC 62769-109-1, prepared by SC 65E “Devices and integration in enterprise systems“, of IEC/TC 65 “Industrial-process measurement, control and automation“ was subm

12、itted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62769-109-1:2015. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-03-23 latest date by which the

13、 national standards conflicting with the document have to be withdrawn (dow) 2018-06-23 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights

14、. Endorsement notice The text of the International Standard IEC 62769-109-1:2015 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated : IEC 61784-1 NOTE Harmonized as EN 61

15、784-1. IEC 61784-2 NOTE Harmonized as EN 61784-2. IEC 61804 (series) NOTE Harmonized as EN 61804 (series). IEC 62769-1 NOTE Harmonized as EN 62769-1. IEC 62769-2 NOTE Harmonized as EN 62769-2. IEC 62769-3 NOTE Harmonized as EN 62769-3 1)IEC 62769-6 NOTE Harmonized as EN 62769-6. 1) To be published.

16、BS EN 62769-109-1:2015EN 62769-109-1:2015 2 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For

17、dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to

18、-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 62541-100 - OPC unified architecture - Part 100: Device Interface EN 62541-100 - IEC 62769-4 2015 Field Device Integration (FDI) - Part 4:

19、FDI Packages - - IEC 62769-5 - Field Device Integration (FDI) - Part 5: FDI Information Model - - IEC 62769-7 - Field Device Integration (FDI) - Part 7: FDI Communication Devices - - BS EN 62769-109-1:2015 2 IEC 62769-109-1:2015 IEC 2015 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative r

20、eferences 7 3 Terms, definitions, abbreviated terms and acronyms . 7 3.1 Terms and definitions 7 3.2 Abbreviated terms and acronyms 7 4 Conventions 8 4.1 EDDL syntax . 8 4.2 XML syntax . 8 4.3 Capitalizations 8 5 Profile for CP 9/1 (HART) or CP 9/2 (WirelessHART) . 9 5.1 General . 9 5.2 Catalog prof

21、ile 9 5.2.1 Protocol support file . 9 5.2.2 CommunicationProfile definition . 9 5.2.3 Profile device . 9 5.2.4 Protocol version information 9 5.3 Associating a Package with a CP 9/1 device . 10 5.3.1 Device type identification mapping . 10 5.3.2 Device type revision mapping 10 5.4 Information Model

22、mapping . 10 5.4.1 ProtocolType definition 10 5.4.2 DeviceType mapping . 11 5.4.3 FunctionalGroup Identification definition 11 5.5 Topology elements 11 5.5.1 ConnectionPoint definition . 11 5.5.2 Communication Device definition . 17 5.5.3 Communication service provider definition . 18 5.5.4 Network

23、definition 19 5.6 Methods 19 5.6.1 Methods for FDI Communication Servers . 19 5.6.2 Methods for Gateways . 23 Annex A (normative) Topology scan schema 31 A.1 General . 31 A.2 IdentificationType . 31 A.3 AddressTypeTP 33 A.4 AddressTypeIP . 34 A.5 AddressTypeTDMA . 34 A.6 AddressType . 35 A.7 Connect

24、ionPointType 36 A.8 NetworkType . 36 A.9 Network 37 Annex B (normative) Transfer service parameters 38 B.1 General . 38 BS EN 62769-109-1:2015IEC 62769-109-1:2015 IEC 2015 3 B.2 receiveData 38 B.3 sendData 38 B.4 TransferResultDataT . 38 B.5 TransferSendDataT . 39 Bibliography 40 Table 1 Communicati

25、onProfile definition 9 Table 2 Catalog values for profile devices 9 Table 3 Protocol Version Information . 10 Table 4 Device type catalog mapping . 10 Table 5 ProtocolType HART definition . 10 Table 6 Inherited DeviceType Property mapping 11 Table 7 Identification parameters . 11 Table 8 ConnectionP

26、ointType HART_TP definition . 12 Table 9 ConnectionPointType HART_IP Definition . 15 Table 10 ConnectionPointType HART_TDMA Definition . 16 Table 11 Method Connect arguments . 20 Table 12 Method Disconnect arguments 20 Table 13 Method Transfer arguments . 21 Table 14 Method GetPublishedData argument

27、s 22 Table 15 Method SetAddress arguments 22 Table 16 Method Connect arguments . 24 Table 17 Method Disconnect arguments 24 Table 18 Method Transfer arguments . 25 Table 19 Method GetPublishedData arguments 27 Table 20 Method SetAddress arguments 28 Table A.1 Attributes of IdentificationT 33 Table A

28、.2 Elements of AddressTypeTP 33 Table A.3 Elements of AddressTypeIP . 34 Table A.4 Elements of AddressTypeTDMA . 35 Table A.5 Elements of AddressT 35 Table A.6 Elements of ConnectionPointT . 36 Table A.7 Elements of NetworkT 36 Table B.1 Attributes of TransferResultDataT 38 Table B.2 Attributes of T

29、ransferSendDataT 39 BS EN 62769-109-1:2015 4 IEC 62769-109-1:2015 IEC 2015 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIELD DEVICE INTEGRATION (FDI) Part 109-1: Profiles HART and WirelessHART FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardiza

30、tion comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes Internati

31、onal Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in

32、this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the t

33、wo organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have t

34、he form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinte

35、rpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national

36、 or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carr

37、ied out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Com

38、mittees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn

39、to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. International Standard IEC 62769-109-1 has been prepared by subcommittee 65E: Devices and integration in enterprise systems, of IEC technical co

40、mmittee 65: Industrial-process measurement, control and automation. The text of this standard is based on the following documents: CDV Report on voting 65E/356/CDV 65E/419/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above

41、 table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 62769 series, published under the general title Field Device Integration (FDI), can be found on the IEC website. BS EN 62769-109-1:2015IEC 62769-109-1:2015 IEC 2015 5 The commi

42、ttee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised editi

43、on, or amended. BS EN 62769-109-1:2015 6 IEC 62769-109-1:2015 IEC 2015 INTRODUCTION The International Electrotechnical Commission (IEC) draws attention to the fact that it is claimed that compliance with this document may involve the use of patents concerning a) method for the supplying and installa

44、tion of device-specific functionalities, see Patent Family DE10357276; b) method and device for accessing a functional module of automation system, see Patent Family EP2182418; c) methods and apparatus to reduce memory requirements for process control system software applications, see Patent Family

45、US2013232186; d) extensible device object model, see Patent Family US12/893,680. IEC takes no position concerning the evidence, validity and scope of this patent right. The holders of these patent rights have assured the IEC that he/she is willing to negotiate licences either free of charge or under

46、 reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with IEC. Information may be obtained from: a) ABB Research Ltd Claes Rytoft Affolterstrasse 4 Zurich, 8050 Switzerland b) Pho

47、enix Contact GmbH CLASSIFICATION NETWORK_CONNECTION_POINT; CAN_DELETE FALSE; PROTOCOL HART; CONNECTION_POINT ConnectionPoint_TP5; VARIABLE DevAddr LABEL “Address“; CLASS DEVICE; TYPE UNSIGNED_INTEGER(5); HANDLING READ VARIABLE DevMfg LABEL “Manufacturer“; CLASS DEVICE; TYPE UNSIGNED_INTEGER(2); HAND

48、LING READ VARIABLE DevType LABEL “Device Type“; CLASS DEVICE; TYPE UNSIGNED_INTEGER(2); HANDLING READ VARIABLE DevRev LABEL “Device Revision“; CLASS DEVICE; TYPE UNSIGNED_INTEGER; HANDLING READ VARIABLE DevTag LABEL “Tag“; CLASS DEVICE; TYPE ASCII(32); HANDLING READ BS EN 62769-109-1:2015 14 IEC 627

49、69-109-1:2015 IEC 2015 VARIABLE DevPollAddr LABEL “Poll Address“; CLASS DEVICE; TYPE UNSIGNED_INTEGER MAX_VALUE 15; /Define appropriate max value for various revisions HANDLING READ COLLECTION ConnectionPoint_TP5 LABEL “Connection Point“; MEMBERS ADDRESS, DevAddr, “Device Address“; MFG, DevMfg, “Manufacturer“; DEV_TYPE, DevType, “Device Type“; DEV_REV, DevRev, “Device Re